Business
The Machinist
IN FULL CONTROL
We would love to maintain our position as the largest and most trusted remote control and set-top box manufacturer in the country while also boosting our position as the leading OEM, ODM and EMS Company in the categories we deal in, says Vijay Kumar Sachdeva, MD & CEO, Laxmi Remote (INDIA) Pvt Ltd
10+ min |
November 2020
The Machinist
EMPOWERING THE WORLD'S MACHINE ENGINEERING
Machine manufacturers must build smarter machines to compete globally with shrinking margins, expanding customisation and environmental and government regulations.
2 min |
November 2020
The Machinist
THE BEDROCK OF PROCESS TRANSFORMATION
Digitalisation as a means to improve customer connect and process efficiency was already well known. However, the Covid-19 pandemic accelerated the usage and adoption ofdigital systems, says Prosenjit Sengupta, EVP & Chief Digital Officer, Thermax Limited
5 min |
November 2020
The Machinist
TOUCHING THE SKY IN LESSER COSTS
The buy to fly ratio is ~ 28 just in case of a conventionally factory-made AISI 316L bracket. Additive manufacturing will bring down the get to fly ratio to ~ 1, leading to significant value and time savings.
7 min |
November 2020
The Machinist
BEST TIME FOR THE INDUSTRY
The days ahead could see the Indian aerospace & defence industry growing by leaps and bounds, says GK Pillai, Director, Walchandnagar Industries Limited (WIL)
3 min |
November 2020
The Machinist
A NEW RECORD
Climbing up from 56.8 in September 2020 to 58.9 in October 2020, Indian manufacturing’s PMI has recorded its strongest improvement in the health of the sector in over a decade.
2 min |
November 2020
The Machinist
STANDING STRONG
The Company expects to maintain annual growth of 20 percent in next three years, says Satish Kumar Agarwal, Chairman and Managing Director, Kamdhenu Group
4 min |
October 2020
The Machinist
PREPARED FOR FUTURE
A key step in risk mitigation against future disruptions will be the creation of flexible operating models, increasing automation and reliance on technology to minimise human interface, says Rajendra Chunodkar, President – Manufacturing Operations, Lupin Limited.
9 min |
October 2020
The Machinist
PREPARING FOR TOMORROW
Health and well-being of employees and facilities have been the focus of all manufacturing facilities and will continue to hold the top priority status for the future as well. The next step has been continuing manufacturing in a safe and cautious manner. And finally, retooling and preparing for tomorrow, says Sameer Mathur, Chief Operating Officer, Schaeffler India
6 min |
October 2020
The Machinist
READY FOR THE NEXT LEVEL
‘With the announcement of Government’s Atmanirbhar initiative, we are confident that the industry will take up the future challenge and focus on deploying worldclass technologies and processes along with upgrading the skills of its workforce,’ says Raju B Ketkale, Deputy Managing Director, Toyota Kirloskar Motor (TKM)
4 min |
October 2020
The Machinist
BIG BOOST TO THE INDUSTRY
The machine tool industry is essential for the success of the aerospace & defence sector in India. We can already visualise the positive impact of “Make in India”, and with “Atmanirbhar Bharat” the machine tool industry will foresee big boost undoubtedly, says Mihir Baxi, President – Global Sales, Jyoti CNC Automation Ltd.
4 min |
October 2020
The Machinist
INNOVATING WITH GLOBAL AMBITIONS
The times have changed and it is imperative that we innovate all the time to effectively cater to the demands of customers, says Mohini Kelkar, Founder & Director, Grind Master Group
4 min |
October 2020
The Machinist
METAL BINDER JETTING SIMULATION
Simulation irons out Metal Binder Jetting defects to enable mass-production Additive Manufacturing
2 min |
October 2020
The Machinist
FOCUSED ON PROCESS COMPETENCY
Process competency is a very crucial factor for success in the aerospace & defence sector, says L Krishnan, MD, TaeguTec India Pvt Ltd
2 min |
October 2020
The Machinist
BUILDING ON A STRONG FOUNDATION
As the requirements of aerospace & defence sector are niche, they need niche solutions. The machines have to be built with special features and need to be robust to withstand the tough demands year on year, says Praful Shende, Chief Sales and Marketing Officer - Bharat Fritz Werner Ltd. (BFW)
5 min |
October 2020
The Machinist
A NEW SUNRISE
The Government of India has recently passed three key labour reform bills. This long due and much-awaited enhancement in the governance structure is likely to usher in a new era of progress and development.
10 min |
October 2020
The Machinist
Ensuring Smooth Business In The Covid Era
The Covid-19 crisis allowed businesses to engage in new strategic directions. It also encouraged to accelerate the implementation of existing ones and to optimise the organisational structure.
3 min |
September 2020
The Machinist
UNSHAKEABLE CONFIDENCE!
We believe India will recover sooner and better from the crisis than many other economies and growth would start to return in 2021. In the next 2-3 years, the CV industry could return to the market volumes we saw in 2019, says Satyakam Arya, MD & CEO, Daimler India Commercial Vehicles (DICV)
9 min |
September 2020
The Machinist
TQM: A SUSTAINABLE, COMPETITIVE ADVANTAGE
The levers to accomplishing a sustainable competitive advantage are many; but if one were to delve deeper, you would find that quality forms the guiding thread across every internal touchpoint.
5 min |
September 2020
The Machinist
THE TOUGHEST LEADERSHIP TEST!
With the changing consumer behaviour and preferences, there may be new opportunities opening-up with the need for new business models to service the changing market needs, says Krishan Kohli, Head of Hydraulic Brake Systems & Vehicle Dynamics business units, India, and Managing Director, Continental Automotive Brake Systems, India
5 min |
September 2020
The Machinist
THE QUEST FOR TERRIFIC AIR!
A company active in the real estate business was looking for an air disinfection system to be deployed in its campuses. When it could not find an appropriate solution in India, it decided to develop and manufacture the system on its own. Ankit Sharma, Director, Airific Systems Pvt. Ltd. shares the journey with The Machinist
5 min |
September 2020
The Machinist
TAKING RESPONSIBILITY
It is very important as a senior management member on how we respond to these challenges and overcome this situation, says Sanjiv Paul, Sr. Vice President, India Yamaha Motor
7 min |
September 2020
The Machinist
EYES ON SKY, FEET ON GROUND!
Riding on technology adaptability and scalability, Nishant Jairath – Director, Metalman Auto Pvt. Ltd. is confident that India will probably see the same growth in terms of achieving five percent or six percent YOY growth on GDP after March 2021.
9 min |
September 2020
The Machinist
FOCUSSED STRATEGY
“We shall focus on new product development to meet the market requirements in order to maintain our leadership position in the market,” says Nikhil Sawhney, Vice Chairman & Managing Director, Triveni Turbine Ltd.
6 min |
September 2020
The Machinist
ENHANCED VISION
The new Kodak TV India manufacturing plant will develop and test more Android TV products within India thereby reducing dependency on other countries, says Avneet Singh Marwah, Director and CEO, Super Plastronics Pvt Ltd
5 min |
September 2020
The Machinist
COLLABORATIVE PROCESS PLANT ENGINEERING
Design, integration as well as the layout of industrial equipment in terms of plant design and engineering to ensure operational efficiency has become crucial as it involves many factors.
5 min |
September 2020
The Machinist
Heralding A New Beginning
Social distancing restrictions on the shopfloor call for a relook at manufacturing strategy, with better use of equipment backed by data, says T K Ramesh, Managing Director & CEO, Micromatic Machine Tools Pvt. Ltd.
5 min |
August 2020
The Machinist
The Power Of Power Skiving
As with all manufacturing technologies, quality, cost optimization, flexibility and productivity are the top issues. ‘Power Skiving’ makes a significant contribution to each of these aspects.
7 min |
August 2020
The Machinist
Dealing With The New Challenges
To be the company that is disrupting instead of being disrupted by the competition requires flexibility and agility along with a leading edge thinking and technology to make that happen, says Cas Brentjens, Vice President, Infor Nexus for Asia Pacific & Japan
6 min |
August 2020
The Machinist
EV ACE LIST 2020
With the Indian electric vehicles industry ready to ride into an electrifying period, The Machinist lists out some of the key leaders who will be at the forefront of the EV Future.
10+ min |