Try GOLD - Free
Brass, Steel And Fire
Model Engineer
|4624
A Special Exhibition at the NRM
-

I was delighted to accept an invitation from the NRM to attend the opening of a new exhibition dedicated, rather refreshingly, to model engineering. Unlike some other exhibitions that may have included models in a supporting role, here they really are the star of the show. To coincide with the unveiling of Stephenson’s Rocket which has now settled in its permanent home in York, the team at the Museum has brought together a fascinating collection of very early models - almost exclusively locomotives - in order to illustrate two things: firstly the purpose and function of model engineering and secondly, the pure joy in the making of mechanical models. I would say it is this second aspect that shines through strongest as one walks around the room but, to look firstly at the concept of engineering models, one is invited to consider the reason for their production.
In the first half of the 19th century pioneers were striving for attention as, following the success of Rocket at the Rainhill Trials, steam ‘locomotion’ began development and a model was able to demonstrate ideas without, or prior to, the obvious expense of full-size production. An apprentice to Robert Stephenson at the time, Edward Fletcher’s mind was immersed in what would be built next (after Rocket) and he is believed to have experimented with a model of Invicta (photo
This story is from the 4624 edition of Model Engineer.
Subscribe to Magzter GOLD to access thousands of curated premium stories, and 10,000+ magazines and newspapers.
Already a subscriber? Sign In
MORE STORIES FROM Model Engineer

Model Engineer
WORKSHOP TIP - Boring Eccentrics
I am making a 1 inch Minnie traction engine and have arrived at the machining of the eccentric straps.
3 mins
4635

Model Engineer
Wenford A 7¼ Inch Gauge 2-4-0 Beattie Well Tank
The stage has now been reached where the well tank body can be completed but beforehand there are some internal details to add.
4 mins
4635

Model Engineer
Vertical Boiler Locomotives
Vertical Boiler Locomotives
4 mins
4635

Model Engineer
Union Nuts, and How to Make Them
These are quite different from those commercially available and are made from copper
3 mins
4635

Model Engineer
SHOWCASE Paul's Engine
One day my son Paul came to me and asked if we could make something in my workshop, so that he could learn engineering processes.
1 min
4635

Model Engineer
CLUB NEWS
My secret’s out!
9 mins
4635

Model Engineer
Building Dancer - The Boiler
Dancer needed a boiler that would be somewhat larger than the size permitted under the Model Engineering exemptions in the New Zealand regulations.
10 mins
4635

Model Engineer
An Inverted ‘Ross Yoke' Watercooled Stirling Engine
As with all my hot air engines they are cheap to build, mostly from scrap
5 mins
4635

Model Engineer
A Draught Proposal
A Draught Proposal
12 mins
4635

Model Engineer
A Boiler Feed Pump
A Boiler Feed Pump
2 mins
4635
Translate
Change font size