With two competitions for you to enter, plus exclusive details of Tormek's T-8 Black 50-year anniversary model, the May issue also boasts a wide range of projects for you to make – from a garden trellis to a guitar stand - along with some fantastic features, technical articles, and tests

PROJECTS & TURNING
 • Mission-style clock case
 • Beginners’ table lamp
 • Mini pole-lathe  
 • Scratch-built lapstrake canoe
 • Guitar stand
 • Vice restoration
 • Obelisk trellis
 • Winged bowl

TECHNICAL
 • Furniture making finishing touches
 • Tormek honing wheels: a how-to guide
 • Anatomy of a plane

FEATURES
 • Archive – The magical grandfather clock  
 • Profile: pole-lathe turner Gudrun Leitz
 • Book reviews: Woodlander and Woodland Craft, by Ben Law
 • Profile: Michael Brown chairmaker
 • Take 5

ON TEST
 • Triton TSPL152 1,100W 152mm surface planer
 • AukTools Silicone Chisel Guards set
 • The Wood Veneer Hub – Ultimate & Coloured wood veneer packs

DOUBLE WIN! 1 of 5 sets of 10 AUKTools Silicone Chisel Guards and 1 of 2 MICROJIG Grr-ripper2 Go™ table saw accessories

See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter.

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our May 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Featuring such projects as a sublimely delicate furnace ring box and a turned waveform bowl, along with a technical piece on workshop mobility and lots more, the May issue also includes a fantastic competition: win a Robert Sorby Five-piece Traditional Bolster Satinwood Bevel Edge Chisel Set – worth over £290!

PROJECTS & TURNING
 • Tturned waveform bowl
 • Furnace ring box  
 • Concorde guitar stand  
 • Cookbook stand  
 • Abrasives storage unit 
 • Nest of tables
 • Barley twists

TECHNICAL
         • Albion Timber column: hitting the ground running
         • Woodwork foundations: shooting board
         • Workshop mobility & helpful aids  
         • Wedged tenons

FEATURES
        • Heather Jansch’s equine-inspired driftwood sculptures 
        • Archive – indoor-outdoor spaces
 • The Alan Peters Online Furniture Award 2024 – 'Excellence without elitism'
 • The Alan Peters Online Furniture Award 2024 – make your entry count
 • Book review: Creative Woodturning Projects by Richard Findley
 • Wheels through the years
        • Take 5

ON TEST
 • Clarke CWS250 250mm whetstone sharpener
        • Pentel Graphgear 1000 Automatic Pencil Set 

WIN! A Robert Sorby Five-piece Traditional Bolster Satinwood Bevel Edge Chisel Set – worth over £290! See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our May 2024 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Join us as we celebrate 25 years of Turners Retreat, bringing you the lowdown on the company’s history as well as a very special competition: be in with a chance of winning 1 of 3 limited-edition 25th anniversary parting tools.

PROJECTS & TURNING
• Three-legged breakfast stool
• Beginners' guide to woodturning – part 1: Intro to the lathe, tools & consumables
• Krenov cabinet
• Fixings tote
• Caterpillar Bag
• Contemporary turned clock
• Playground for dolls

TECHNICAL
• Advice on using wood dyes
• Albion Timber column: balancing business & pleasure
• Guide to lock fitting
• Woodwork foundations: first workbench
• DeWalt DWE7485 210mm compact table saw – personal modifications

FEATURES
• 25 years of Turners Retreat
• Archive – books above the architrave
• The Alan Peters Online Furniture Award 2024 – 'Excellence without elitism'
• Stitched-plank boats
• Caz Foster’s ‘Sycamore Leaf’ carving
• Take 5

ON TEST
• Makita HS012G XGT cordless circular saw
• MicroJig FitFinder Lock Mitre Bit
• Ooznest WorkBee Z1+ CNC Machine

WIN! 1 of 3 limited-edition Turners Retreat 25th anniversary parting tools. See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our April 2024 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

In the March issue, we finally announce the overall winner and runners up of our 2024 Liberon competition, not to mention a host of other exciting content. Plus, there’s also five Kutzall five-piece rotary burr kits up for grabs

PROJECTS & TURNING
 • Coal bucket upcycle  
 • Farmhouse chair in sapele   
 • Make your own reproduction Generation Weil Chair 
 • Turned spheres 
 • Chisel handles 
 • Edwardian-style French doors  
 • Workshop build – part 2
 • Faux brass box with metallic knob 

TECHNICAL
 • Woodwork foundations – part 4
        • Essential woodworking toolkit

FEATURES
        • Liberon competition – winners’ showcase
        • Archive – smarten up your tool drill
 • The Alan Peters Online Furniture Award 2024 – 'Excellence without elitism'
 • Albion Timber - high quality British hardwood specialists
 • Marquetry in Sorrento
 • Metalcraft UK – metal crafting made easy
 • Take 5

ON TEST
 • Milescraft Grabber, GrabberPLUS & GrabberPRO push blocks
        • Kutzall five-piece rotary burr kit – 1⁄8in shaft

WIN! 1 of 5 Kutzall five-piece rotary burr kits – worth over £70 each. See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our March 2024 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Our February issue is positively brimming with workshop projects for you to make and enjoy – from Bob Chapman’s miniature turned hats to Phil Davy’s through-dovetailed storage box for planes

PROJECTS & TURNING
 • Curved oak desk 
 • The Sutton workbench 
 • Miniature turned hats 
 • Through-dovetailed storage box for planes
 • Pyrographed bowl 
 • Wurlitzer retirement presentation

TECHNICAL
 • Woodwork foundations – part 3
        • Choosing wax wisely for antique furniture
        • Protecting & preserving your timber

FEATURES
 • Archive – rearranging the deckchairs
 • The Alan Peters Online Furniture Award 2024 – 'Excellence without elitism'
 • The building of a Nordfjord faering
 • In profile: French woodturner, Daniel Salvucci 
 • Take 5

ON TEST
 • Trend T8EK 1⁄2in plunge router
        • Veritas Box-Maker's Plough Plane

WIN! A Trend Tool Technology MS/T/SET3/A – ProTransit three-piece Storage Set – worth £130 – or 1 of 2 14 litre MS/P/TB1 – Pro Modular Storage Toolbox 500s – worth £36.92. See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

Your Favourites
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our February 2024 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

To mark the beginning of 2024, we bring you a whole host of exciting content to help you through a chilly few months! There's also two competitions for you to enter, from MPower Tools and Machine Mart – enjoy!

PROJECTS & TURNING
 • Recreating the Sutton Hoo Lyre
 • A bee box for jewellery
 • Apto shoe rack
 • Door reversal
 • Mini caravan
 • Turned bowl with molecular structures
 • Natural-edge goblet

TECHNICAL
 • Woodwork foundations – part 2
        • Health & safety tips from Mirka® UK
        • Daltons Wadkin’s top tips for buying woodworking machinery 

FEATURES
 • Book review: The Art of Pyrography – by Bob Neill
 • The Alan Peters Online Furniture Award 2024 – 'Excellence without elitism'
 • Archive – tools at bargain prices
 • Contemporary blanket chest by Dovetailors 
 • Wooden artefacts commonly found beside the seaside
 • The Pallasboy Iron Age Vessel 
 • Take 5

ON TEST
 • MPower Tools’ 8in single- & double-sided diamond benchstones
        • Veritas Jointer Blade Sharpener

DOUBLE WIN! MPower Tools' single & double-sided diamond bench stones; plus, a Clarke Pembroke II Eco-Design Multi Fuel Stove – worth £958.90! See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our January 2024 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Delivering some festive cheer to your workshop, the December issue contains some great ideas for Christmas toys & two competitions to enter: win a Festool TSV 60 K plunge-cut saw with scoring function, plus 1 of 3 Trend jig sets (CAB/JIG/A & CAB/JIG/B)

PROJECTS & TURNING
 • Working toy yacht 
 • Commemorative turned trophy
 • Elegant elliptical carriage clock
 • Workshop build – part 1
 • Wooden snake jigsaw
 • Tall salt and pepper mills

TECHNICAL
 • Liberon Q&A – tackling wood preparation
        • Using veneers for furniture making
        • Understanding tool steel

FEATURES
 • Gino Masero – a modern woodcarving master
 • The Alan Peters Online Furniture Award 2024 – 'Excellence without elitism'
 • Archive – shapely spokeshaves
 • Andrew Lawton – a very English furniture maker
 • Mike Taffinder Woodcrafts
 • Take 5

ON TEST
 • Festool TSV 60 KEBQ-Plus plunge-cut saw with scoring function
 • Expo pen knife & cutting mat kit

DOUBLE WIN! A Festool TSV 60 K plunge-cut saw with scoring function – worth over £950; plus, 1 of 3 Trend jig sets – Cabinet Handle Jig (CAB/JIG/A) & Cabinet Concealed Hinge Jig (CAB/JIG/B) – worth £70 each. See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES

You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our December 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Boasting a wide range of workshop projects for you to make, our November issue is guaranteed to put a smile on your face – the perfect companion for any woodworker’s autumn/winter adventures 

PROJECTS & TURNING
 • Banjo barometer
 • Ice cream van soapbox
 • Repurposing fence posts
 • Cottage door
 • Coco de Mer repair and restoration
 • Suffolk latch
 • Window board replacement 
 • Platter and apples

TECHNICAL
 • Evolution Power Tools
        • Boxes constructed with furniture maker's jointing techniques
        • Backgammon board repair

FEATURES
 • Stürmer Maschinen: Over 40 years of Precision & innovation
 • The Alan Peters Online Furniture Award 2024 - 'Excellence without elitism'
 • Archive: mitre shooting block
 • Anatomy of a Classic – Ercol
 • Take 5

ON TEST
 • Clarke CWL460 18in (460mm) woodturning lathe

WIN! A Liberon prize bundle worth over £300, plus two runner up prizes of a Liberon woodcare product bundle worth over £120

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our November 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Autumn woodworking at its very best – five fantastic workshop projects; fascinating technical topics; interesting features – plus three competitions for you to enter! 

PROJECTS & TURNING
 • Stable door
 • Bespoke workbench
 • Replacement display board 
 • Letter rack
 • Mixed media collaboration

TECHNICAL
 • Native tree species
        • Collecting dust from furniture making
        • Sash cramp problems & solutions
        • Liberon Q&A: tackling the cleaning of wooden floors
        • Drill table pad

FEATURES
 • The Tormek Scholarship Award  
 • Archive: rush-bottomed chair
 • Book review: Turning Decorative Bowls by Richard Findley 
 • White Waltham Restoration
 • Sarah Kay’s ‘Bone’ table
 • Take 5

ON TEST
 • Clarke CBG6SC bench grinder with sanding belt & lamp
        • Optimaxx wood screws

TRIPLE WIN! 1) A Liberon prize bundle worth over £300; 2) Trend T8 router bundle worth £650; 3) 1 of 3 Bosch GEX 18V-125 cordless random orbit sanders plus EXPERT M480 Net Starter Kit – worth £225. See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our October 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

With a fascinating feature on wood blocks’ use in the production of stamps, two woodturning articles, along with two new competitions for you to enter, the September issue is one not to be missed 

PROJECTS & TURNING
 • ‘Basket illusion’ turned dishes
 • Altar table
 • Repurposed cutlery cabinet 
 • All-wood clock – part 2 
 • Horizontal shelves
 • Wet-turned bowls & natural-edge vase   

TECHNICAL
 • Building tables 
 • Meet the Tormek Sharpening Ambassadors

FEATURES
 • Wood blocks & the production of stamps 
 • Felder Group: Precision * innovation * perfection
 • Book review: Whittling Woodland Animals by Peter Benson 
 • Wood’s use in smoking paraphernalia through the years
 • Archive – Greenhouse with brass knobs on
 • Katherine Fernie’s Plan Chest
 • Take 5

ON TEST
 • Makita LXT DLX2460TJ drill & driver combo
        • iGaging EZ Cal digital calliper

DOUBLE WIN! A Liberon prize bundle worth over £300 & 1 of 3 Shaper Trace vector conversion tools, courtesy of Shaper Tools – worth £109 each. See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our September 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Showcasing fantastic furniture made by the Chippendale School’s 25 Professional Course graduates, our August issue is a celebration of woodworking. There’s also two more SBS Triple Diamond Stone Sharpening Stations up for grabs – good luck! 

PROJECTS & TURNING
 • Gothic harp
 • Turned garden ornaments 
 • Three-tiered ‘flocked’ trinket box
 • All-wood clock – part 1 
 • Cook box for camping
 • Turned cup & ball toy  

TECHNICAL
 • Hammer A2-26 planer/thicknesser 
 • Table saw talk  
        • How to sharpen tools on a Tormek – part 2

FEATURES
 • Archive – rebating around the bend 
 • Chippendale School of Furniture 2023 graduate showcase 
 • Book review: Whittling Woodland Animals by Peter Benson 
 • The inherited toolbox 
 • Take 5

ON TEST
 • Shenton Woodcraft Repeat-Edge Sharpening System
 • Microjig Grr-ripper 2Go™

WIN! 1 of 2 SBS Triple Diamond Stone Sharpening Stations, courtesy of MPOWER Tools Ltd – worth £195.95 each! See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our August 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

With a turning project that’s out of this world and three outdoor builds to keep you busy, our July issue has lots in store, including two fantastic competitions: win 1 of 3 Milescraft PocketJig200s & 1 of 2 SBS Triple Diamond Stone Sharpening Stations

PROJECTS & TURNING
 • Garden dovecote
 • Spaceship salt/pepper mill
 • The Jez Broun Ecoustic guitar
 • Outdoor mailbox 
 • Outdoor pizza kitchen  
 • Turned spinning tops 

TECHNICAL
 • Hidden joints for drawers – how best to cut lapped dovetails using hand tools
 • How to sharpen tools with a Tormek – part 1: various knives & drill bits 
        • Richard Warmisham’s Mont Blanc pen box

FEATURES
 • Archive – expanding book rack
 • Profile: East End veteran turner Maurice Franklin
 • Book review: Oak-Framed Buildings by Rupert Newman
 • In search of Japanese woodworking enlightenment
 • Take 5

ON TEST
 • Milescraft PocketJig200 pocket-hole jig
 • Vesper 7in blackwood infilled try square

DOUBLE WIN! 1 of 3 Milescraft PocketJig200s, courtesy of Wood Workers Workshop, & and 1 of 2 SBS Triple Diamond Stone Sharpening Stations, courtesy of MPOWER Tools Ltd.
See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our July 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

With summer in our midst, we bring you several outdoor and workshop projects, plus a fantastic feature on Jim Stickings FIOC, who's all-wood clock really is a technical triumph. There are also two competitions for you to enter, and much more in store – enjoy!

PROJECTS & TURNING
•Marquetry jewellery box
•Large pair of garden planters
•Turned vase replica 
•Back door bench
•Turned desk clock
•Workshop cupboard 

TECHNICAL
•Choosing & using a planer/thicknesser
•Tormek’s range of kits, accessories, consumables & storage solutions
•Confessions of a jobbing joiner

FEATURES
•Archive – glue factory visit
•Profile: Jim Stickings FIOC
•The importance of hedgelaying
•Take 5

ON TEST
•AUKTools Solid Brass Router Inlay Kit
•MPOWER Meta Bundle: full CRB7 kit & all accessories

DOUBLE WIN! 1 of 3 AUKTools Solid Brass Router Inlay Kits and 1 of 2 CRB7 Universal Combination Router Base Mk3 kits, plus all accessoriesSee inside the issue for details or visit www.thewoodworkermag.com/category/win to enter.

YOUR FAVOURITESYou can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more.We hope you enjoy our June 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

A celebration of UK heritage crafts, in this issue we meet two highly-skilled practitioners – an instrument bow maker and a master clog maker – as well as bringing the usual mix of projects, technical articles, features and product tests for you to enjoy

PROJECTS & TURNING
 • Nest of bowls from crotch wood
 • Gate leg table
 • Mallets & cutting gauges from offcuts  
 • Oak garden tray 
 • Phone holder
 • Large vase on a small lathe
 • Round window 

TECHNICAL
 • Creating curves
 • Tormek grinding wheels
 • Strength & uses of wood

FEATURES
 • Archive – Oxford frame or teapot stand?
 • Endangered heritage crafts
 • Green chairmaking with Mike Abbott
 • William Morris – master of crafts
 • The miller’s tale
 • Take 5

ON TEST
 • Clarke CMS216S sliding mitre saw 
 • Makita DTD172Z LXT brushless impact driver
 • Asahi Free-Way coping saw

WIN! 1 of 2 Robert Sorby Sandmasters – worth £64.62 each! 

See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter.

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our April 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Spring has sprung and it's time to get back in the workshop – pick up the latest edition of The Woodworker & Good Woodworking and get inspired!

PROJECTS & TURNING
• ‘Baroque’ style guitar: a tribute to violin maker Arthur Richardson
• Slate coffee table 
• Graduation chest 
• 10 hollow form turning tips
• Oak side table
• Retro magazine rack
• Oak candlesticks

TECHNICAL
• Beginners’ guide to furniture making – fixtures & fittings
• Furniture additions
• Tormek grinding jigs
• Prepping timber

FEATURES
• Archive – correlated studies
• SFWW & CCFMS: An innovative collaboration
• Wood's part in art
• Take 5

ON TEST
• Niwaki Ryoba, Dozuki & flush cut saws
• AUKTools Circular Router Inlay Template

WIN! 1 of 5 four-piece AUKTools Router Inlay Template sets, courtesy of Wood Workers Workshop

See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter.

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our March 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

With a variety of content to suit all skill levels, the new edition includes two competitions and a fantastic technical piece from Jeff Maker 

PROJECTS & TURNING
• Map chest 
• Zipped vase 
• From sofa bed to easel  
• Tit simple tit & sparrow boxes 
• Single bed for a small space  
• Back to (spindle) basics  

TECHNICAL
• Making the ‘Luna’ chair 
• Tormek T-8 Custom 

FEATURES
• The ‘Harrogate’ show returns 
• Archive – Robin Gates explores details of door making 
• In profile: The Blind Woodturner
• Freed Veneers 
• Take 5

ON TEST
• Clarke CEP450 60mm 450W, CEP720 82mm & Contractor CON950 110mm planers
• Collins Spring Clamp Starter Kit
• UJK Bandsaw Buddy

DOUBLE WIN! 1 of 3 Clarke power planers and 1 of 5 Robert Sorby Tool Rest Adjustment Collars (TRAC) 

See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter.

YOUR FAVOURITES
You can also find the usual favourite pages, including news, welcome, marketplace, letters and readers’ tips, plus much more. We hope you enjoy our February 2023 issue – pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

Our first issue of 2023 includes two fantastic competitions, plus a wide range of projects – both general and woodturning – technical articles and features to whet your appetite for the year ahead

PROJECTS & TURNING
• ROUTER-MADE BLANKET BOX: Peter Bishop shares an elegant and functional router project for the intermediate woodworker, which is made using kiln-dried English oak
• HARDWOOD BOXES: Gordon Warr uses a variety of hardwood offcuts to turn a collection of little boxes, in a range of unusual shapes 
• And more!

TECHNICAL
• ROUTERS & ROUTER TABLES: Routers are great tools for shaping edges in furniture making, but they also have several other uses, as John Bullar discovers 
• TORMEK T-8 ORIGINAL: We move on to looking at the T-8 Original, which is described as a powerful and versatile water-cooled sharpening system

FEATURES
• ARCHIVE: Robin Gates wanders distractedly through the September 1926 issue of The Woodworker
• D&M TOOLS’ RECIPE FOR SUCCESS: Established in 1978 and proudly remaining an independent family business to this day, D&M Tools not only boasts a Twickenham tool empire but also the industry’s No.1 hand, power tools and machinery event, which recently celebrated its 20th anniversary
• And more!

ON TEST
• SBS Triple Diamond Stone Sharpening Station 
• Veritas plunge router base

DOUBLE WIN!
COMPETITION 1: Win 1 of 3 SBS Triple Diamond Stone Sharpening Stations – worth £195.95 each
COMPETITION 2: Win 1 of 2 Robert Sorby Micro Resin Pen Turning Sets – worth £75.60 each

See inside the issue for details or visit www.thewoodworkermag.com/category/win to enter – good luck!

YOUR FAVOURITES
As well as all this, you can also expect to find your usual favourite pages, including news, welcome, marketplace, next month, letters and readers’ tips, plus much more.

We hope you enjoy the January 2023 issue of The Woodworker & Good Woodworking, which is now on sale! Pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH


Our last issue of 2022 rounds off the year perfectly with a wonderful novelty money box build, which would make the perfect Christmas gift, not to mention a whole host of other content to entertain you through the festive period and beyond

PROJECTS & TURNING
• PIANO MONEY BOX: Simple to make and requiring just a few tools and materials, Peter Dunsmore’s clever design can be modified so that music plays when the lid is opened
• THREE BOWLS FROM ONE LOG: Using seven core turning tools, Andrew Hall shows how you can produce two side- and one end-grain bowl, all without a bandsaw
And many more....

TECHNICAL

• TORMEK T-4 ORIGINAL: We take an in-depth look at this compact, high quality sharpening system, which is supplied with a 200mm wetstone
• RECONNECTING WITH TREES AS A RAW MATERIAL: John McMahon outlines the past, present and future of woodland management from a woodworker’s perspective

FEATURES
• ARCHIVE: Robin Gates finds gifts made from oddments in The Woodworker of December 1947
• ALAN PETERS FURNITURE AWARD 2022 PRIZE-GIVING CEREMONY: Jeremy Broun reports from this recent event, where judges and winners interacted, pieces were analysed in greater detail, and the power of social media was truly realised
• THE PEOPLE'S MOSQUITO: Are you interested in helping to build a British aviation icon? Aero Vintage Limited is on the lookout for capable woodworkers
• IT’S GOOD TO BE A PIPE MAKER: Arko Højholt meets Danish pipe maker Tom Eltang, who’s widely regarded as one of the very best 
And more...

ON TEST
• Shaper Origin precision router & Shaper Workstation 
• Makita DTD171 18V LXT brushless impact driver

And so much more!

In addition to finally unveiling the winners of The Alan Peters Furniture Award, we bring you a November issue filled with inspiring content and a great mix of projects, plus a fantastic competition prize courtesy of Makita

PROJECTS & TURNING
• FRAMED LEDGED & BRACED DOOR: Glenn Perry sets about replacing an old, worn out door with a custom-made framed ledged and braced version
• CUSTOM TOOL CABINET: So many tools, so little room – Tony Sutton describes his solution to the age-old problem: space and storage
And many more!

TECHNICAL
• WHY TORMEK? We learn more about Tormek’s unique, versatile and effective sharpening system for edge tools as well as the 10 reasons for owning one
• DOVETAILS GREAT & SMALL: Starting with a single large dovetail to examine the basic principle, John Bullar then creates a row of very fine dovetails, which can test the skill of any furniture maker

FEATURES
• ARCHIVE: Robin Gates finds an inlay project for beginners in The Woodworker of November 1908
• ALAN PETERS FURNITURE AWARD WINNERS 2022: After much hard work and deliberation, we finally present the 2022 award winners ahead of a physical prize-giving ceremony and exhibition
And many more!

ON TEST
• Trend Pocket Hole Jig Range
• Hedgehog Easy Air Wedge

WIN!
To celebrate 50 years of trading in the UK, Makita is offering one lucky reader the chance to win a DMR110 DAB+ job site radio – see inside the issue for details or visit www.thewoodworkermag.com/category/win to enter – good luck!


We bring you the perfect recipe for autumn woodworking: workshop projects, technical know-how, interesting features, tests on the latest kit & tools, plus a fantastic competition from Trend – enjoy!

PROJECTS & TURNING
• 'A LOOK INSIDE 'LESS IS MORE': Philip Gay of Timber Robot Studio discusses the making of his Art Deco-inspired collector’s chest, as well as sharing a few other unique pieces
• MADAGASCAN MELODY – PART 2: In the second part of this instrument build, Shaun Newman puts the finishing touches to his Malagasy kabosy
And more!

TECHNICAL
• DOVETAIL DILEMMA: Join us as we weigh up the merits of hand-cut dovetails over their machine-made counterparts, discuss saws, then show how to sharpen one
• BASIC CARVING TOOOLS: Carving tools are a mecca for tool junkies, but which ones do you really need? Iain Whittington shares his suggestions

FEATURES
• TORMEK - A DIFFERENT BREED: Established by mechanical design engineer and keen hobby woodworker Torgny Jansson nearly 50 years ago, Tormek isn’t just a global brand made in Sweden, but a name that’s become synonymous with innovation, simplicity, quality and sustainability
• ARCHIVE: The December 1906 issue of The Woodworker stirs Robin Gates to boldly go
And more!

ON TEST
• Trend T18S/CDB Brushless combi drill & Trend T18S/IDB Brushless impact driver
• Measuring & marking tools from FastCap & AUKTools

WIN!
In conjunction with Trend, we’re giving two lucky readers the chance to win a new T18S cordless biscuit jointer kit, featuring six biscuit settings and supplied with 4Ah battery and Fast Charger – see inside the issue for details or visit www.thewoodworkermag.com/category/win to enter – good luck!


As well as featuring two fantastic competitions from ISOtunes and SanderCard, our September issue aims to debunk workshop secrets, make you a better woodworker, as well as entertaining and inspiring you along the way – enjoy!

PROJECTS & TURNING
• ELEGANT CARRIAGE CLOCK: Peter Dunsmore’s clock project is simple to make, using little timber and a few router cutters
• LOOKING AT LELLÓ:  Winner of our recent Liberon competition, designer-maker Ian Burnell takes us through the steps involved in making his critically acclaimed ‘Lelló’ cabinet
And many more!

TECHNICAL
• MORTISE & TENON JOINTS: John Bullar moves on to discussing mortise & tenon joints and how they’re traditionally used in furniture making, beginning with hand tool methods before looking at a few powered techniques
• TIMBER TERMS – PART 43: Peter Bishop finally reaches the end of his long-running series and finishes off with various terms including woolly grain, xylem and zebrano
And more!


FEATURES
• ARCHIVE: Dipping into The Woodworker of July 1919, Robin Gates discovers how to turn a shapely leg and recalls a close encounter with a chuck key
• ERIK WOLKEN IN PROFILE: Through building functional sculpture – work that serves both a sculptural aesthetic and utilitarian function – furniture maker Erik Wolken seeks to create rhythm and poetry in every piece he makes
And more!

ON TEST
• Trend T18S/BJ cordless biscuit jointer
• Woodpeckers Paolini pocket rules
• Ryobi R18F ONE+ fan
• Thorex 31-712R hammer
• Bad Axe saws

DOUBLE WIN!
COMPETITION 1: Win 1 of 2 pairs of ISOtunes LINK 2.0 ear defenders – worth £99.99 per pair 
COMPETITION 2: Win 1 of 50 SanderCards – the ultra-thin hand-sanding tool


Showcasing some fantastic examples of new furniture-making talent along with the usual mix of projects, tech, features and tests, our August issue also gives you the chance to win a top routing prize from sauter – worth over £750!

PROJECTS & TURNING
• WHEELBARROW: Working from a project plan in the July 1945 issue of The Woodworker, Peter Dunsmore follows the original dimensions to recreate the ‘modern’ wheelbarrow design shown here, which doubles up as a handy garden planter
• HORIZONTAL ROUTER TABLE: You may think that a horizontal router table performs the same functions as a vertical one, but working with a router in this orientation actually has a number of significant advantages, as Alan Holtham shows
And much more!

TECHNICAL
• TIMBER TERMS – PART 42: In the penultimate part of this series, Peter Bishop is still in the Ws, but there’s not many more to go!
• DECORATIVE KNIFE-CARVING: Starting with a brief history of the carving knife, Iain Whittington goes on to demonstrate the practical use of various knives for a ‘flat plane’ carving depicting a troll perched atop a fence post

FEATURES
• ARCHIVE: Browsing The Woodworker of July 1958 reminds Robin Gates of adventurous family outings in a Ford ‘Pop’
• LIBERON COMPETITION WINNER: Having asked readers to share their woodworking projects and show off their workshop skills, we finally announce the deserving winner of the recent Liberon competition as well as sharing a few other selected entries
And much more!

ON TEST
• sauter router lifts & Suhner router motor
• Antex Fire Writer pyrography kit
• Nijihiro chisels & Genno hammer

WIN!
A powerful top combination for the router table, we’re giving one lucky reader the chance to win a pivoting sauter router lift OFL3.0 and Suhner 1,530W router motor – worth £750! Find further details and entry requirements on page 18 or visit www.thewoodworkermag.com/category/win



Featuring a varied selection of projects to make, techniques to learn and interesting features to pique your interest, our July issue also includes a fantastic competition from Trend, which gives you the chance to win a cordless sander kit worth £468!

PROJECTS & TURNING
• GARDEN WINDMILL ORNAMENT: Peter Dunsmore makes an attractive garden windmill ornament using standard timbers and recycled bicycle wheel hubs for the pivots
• THERMED SPOONS: Using a dedicated therming jig, exact duplicates of three, four or more can be made, as Andrew Hall shows here
• WORKSHOP SAWHORSE: Every woodworker needs a sawhorse or two, says Stuart Gooda and the following steps show you how to build one quickly and easily
And more!

TECHNICAL
• COLOUR-CHANGING CHATOYANCE: Paolo Pisani takes a look at this natural wood surface property, which involves a shift in colour depending on lighting or observation direction
• TIMBER TERMS – PART 41: Now into the Vs, Peter Bishop continues on to the Ws with a few lengthy descriptions
And more!

FEATURES
• ARCHIVE: While honing neglected hand skills, Robin Gates discovers intriguing jigs and rare techniques for sawing in The Woodworker of October 1915
• LYME BAY CARVINGS: Drawing on his fascinating seafaring and boatbuilding past, Roy Gollop of Lyme Bay Carvings creates hand-carved driftwood sculptures that depict subjects from the animal kingdom, most notably sealife and birds
And more!

ON TEST
• Trend T18S cordless sanders
• UJK Multifunction squares
• Shinwa H-201C steel rule
• WoodFox mini pocket hole jig kit

WIN!
Continuing to celebrate the new T18S cordless range, in conjunction with Trend, we're giving two lucky readers the chance to win 1 of 2 18V sander kits (complete with 2 x 4Ah batteries and 6A charger) – worth £468 per set – find further details and entry requirements on page 34 or visit www.thewoodworkermag.com/category/win


Our June issue will get you in the mood for summer – how about dusting off your tools and making some outdoor projects, or learning a new technical skill? We also have two fantastic competitions for you to enter, so there's a lot to get excited about – enjoy!

PROJECTS & TURNING INCLUDING:
• DOWEL-JOINTED CHILD'S CHAIR: Using birch ply offcuts and the WNew dowelling system, Geoff Ryan makes a personalised chair for his grandson
• WISHING WELL PLANTER: Using standard size timber and a few basic tools, Peter Dunsmore makes an attractive decorative outdoor planter

TECHNICAL INCLUDING:
• CARVED MIRROR FRAME: Peter Scaife presents an ideal project for those looking to use up leftovers, who may wish to practise or learn a few new woodworking skills
• TIMBER TERMS – PART 40: Peter Bishop rounds off the Ts, breaks into and finishes the Us, before starting with a V

FEATURES INCLUDING:
• ARCHIVE: Trouble with his butt hinges sends Robin Gates to The Woodworker of March 1927 for advice
• OUT OF THE WOODWORK: Eric Simmonds, the man behind Out of the Woodwork, creates bird boxes that are unique and inspiring, with an added touch of eccentricity

ON TEST
• Wnew 3-in-1 Dowel Jig & Multi Row Puncher
Robert Sorby SteadyPro system

DOUBLE WIN!
In conjunction with Robert Sorby, we’re giving one lucky reader the chance to get their hands on the versatile SteadyPro turning system, complete with lathe stem – worth £129 – find further details and entry requirements on page 20 or visit www.thewoodworkermag.com/category/win

Also, continuing to celebrate the launch of their new T18S range, we're teaming up with Trend yet again to give one lucky reader the chance to win a cordless biscuit jointer kit (with 1 × 4Ah battery and Fast Charger) – worth £351 – see page 60 for more information or visit www.thewoodworkermag.com/category/win

If you want to hone your woodworking skills, try some workshop projects, learn a trick or two, read some excellent features, as well as have the chance to get your hands on Trend's latest routing kit, be sure to pick up our new May edition – enjoy!

PROJECTS & TURNING
•BASIC BOX-MAKING SKILLS: Dave Roberts’ set of plain pigeon holes tests skills of marking out, cutting, planing and chiselling small components
•JAN'S BIRD BUFFET: Geoff Ryan’s latest bird table build is precisely made and executed  
•DESIGNER DRAWERS: Brian Barber’s free approach to design exposes the simple beauty of his ‘designer drawers’
And much more!

TECHNICAL
•TIMBER TERMS Part 39: Peter Bishop is well into the Ts as he tackles a couple of lengthy subjects including timber-framed and tipped saws
•MARKING TOOLS & TECHNIQUES FOR FURNITURE MAKING: John Bullar explores the range of marking tools available to the furniture maker
•DECORATIVE CARVING - New series, Iain Whittington tells us more in this fascinating introduction to decorative woodcarving

FEATURES
•ARCHIVE: Tempted by The Woodworker of Jan 1904, Robin Gates ponders the practicality of a tool chest
•HOMEGROWN & FIT FOR AN AWARD: Jeremy Broun interviews English Woodlands Timber Ltd, a company passionate about trees
•WOODLAND SPIRIT: Trug maker, coppicer and green woodsman Carl Sadler is striving to keep traditional crafts alive
And much more!

ON TEST
•Trend T12 & T14 workshop and plunge routers
• General Finishes Pearl Effects & Enduro Extender

As well as three different competitions for you to enter and a host of fantastic prizes up for grabs, our April issue has a wide range of projects and technical content, some inspiring features, as well as tests on the latest workshop kit and tools – enjoy!

PROJECTS & TURNING
• TABLE LAMP: Peter Benson creates an Arts and Crafts-inspired square table lamp
• THREE-LEGGED STOOL: Glenn Perry comes up with a unique design for a three-legged stool’s central stretchers, which are cleverly joined by a central sphere
And much more!

TECHNICAL
• FESTOOL DOOR-CUTTING GUIDE: According to the experts at Festool, when cutting doors to length, it’s precision rather than guesswork that’s needed
• ROUTING: SMALL, BEAUTIFUL & CORDLESS: Some of the greatest gifts do come in small packages, as Jeremy Broun finds when looking at various routers
And more!

FEATURES
• ARCHIVE: Looking to bring the garden closer, Robin Gates turns to The Woodworker of April 1956 for a window box
• LES LIVELY IN PROFILE: Les Lively’s work is a fusion of different styles, which emphasise elegant lines and intricate details such as inlay, double dovetail corners and mortise & tenon joints
And much more!

ON TEST
• Trend T18S/MS184 cordless mitre saw 
• Sakazume sanding blocks
• Rider awls
• Robert Sorby Stebcentres rangs

TRIPLE WIN!
We’ve teamed up with Trend once more to give two lucky readers the chance to win an 18V cordless mitre saw kit (with 2 × 5Ah batteries & Fast Charger) from their new T81S range. Also, in conjunction with Geocol, we have five Joiners Mate product bundles up for grabs, and there’s still time to showcase your woodworking skills and win a Liberon prize bundle worth over £300 too. See inside the issue for details or visit www.thewoodworkermag.com/category/win

YOUR FAVOURITES
As well as all this, you can also expect to find your usual favourite pages, including news, welcome, marketplace, next month, letters and readers’ tips, plus much more.

With spring on the horizon, what better way to celebrate than getting back into the workshop. We've got a selection of simple projects to entice you, technical articles to help hone your skills, several fantastic features, plus a brand-new competition from Liberon, which runs over the next three issues

PROJECTS & TURNING
• CLASSIC CAKE STAND: Les Thorne’s design in English ash and sapele features a simple ‘T’ bar handle design
• MANTEL CLOCK: Michael Allsop presents an alternative approach to a typical mantelpiece clock project, using only hand tools
And many more!

TECHNICAL
• TOOL RACKS FROM OFFCUTS: When it came to sourcing timber for a new project, Gareth Jones turned to the offcuts pile, using various bits to make a range of tool racks
• WOODWORKER’S ENCYCLOPEDIA: Peter Bishop moves through the shadows to a stout heart, covers some swaging, then just about trickles into the Ts 
And much more!

FEATURES
• ARCHIVE: The January 1915 issue of The Woodworker propels Robin Gates into the great outdoors for research into a springtime project
• MEET THE CHAIRMEN: Former editor Peter Scaife gives us a tour of his impressive chair collection
And more!

ON TEST
• Benchdogs MK2 Rail Square
• Timberland PRO® workwear
• Shogun Japanese saws

WIN!
We’re teaming up with woodcare experts, Liberon, to give you the opportunity to showcase your woodworking skills and win a prize bundle worth over £300. Running over the next three issues, see page page 22 for further details!

YOUR FAVOURITES
As well as all this, you can also expect to find your usual favourite pages, including news, welcome, marketplace, next month, letters and readers’ tips, plus much more.

We hope you enjoy the March 2022 issue of The Woodworker & Good Woodworking, which is now on sale! Pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH


The shortest and often one that passes in the blink of an eye, February is considered an odd month by many. For those struggling to adjust to the start of a new year, this issue aims to gently ease you back into workshop life following a bit of time out. To find out what's in store, see details below

PROJECTS & TURNING
• CONVENE CHAIRS & TABLES: This set by Mark Hampson nests into one compact unit when not in use, and looks stylish in both guises
• SCRATCH-BUILT WORKBENCH: Using reclaimed materials and a few workshop staples, Paul Chesterman builds a solid, freestanding workbench for around £10
And much more!

TECHNICAL
• SAFETY FIRST: We discuss the issue of unguarded machines and how to avoid dangerous practices
• WOODWORKER’S ENCYCLOPEDIA: Peter Bishop continues working his way through the Ss, and there’s still quite a way to go!
And much more!

FEATURES
• JOBS, JOINTS & JOURNALISM: Peter Scaife, editor of The Woodworker in the mid-1960s, recalls a very different world of woodworking
• BOX-MAKING MASTER: Hearing Steve Altman modestly describe his pieces as “bits of eye candy”, those not familiar with his incredible body of work would be forgiven for underestimating an immense talent
And much more!

ON TEST
• Trend T18S/R14 18V cordless 1/4in brushless router kit
• Veritas Side-Clamping Honing Guide
• Record Power SC1 (2in) mini chuck package & three-piece turning tool sets

WIN!
We’ve teamed up with Trend to give one lucky reader the chance to win a complete T18S cordless router kit, worth £398, which includes everything you need to get started. For entry details, see page 25 of the February issue and follow the instructions given – good luck!

We hope you enjoy the February 2022 issue of The Woodworker & Good Woodworking, which is now on sale! Pick up your copy today, or why not subscribe? https://bit.ly/3n60lTH

In the first of 2022, as well as a host of projects, technical articles, features and tests for you to enjoy, we're also delighted to announce the launch of The Alan Peters Furniture Award 2022. Let's take a closer look at what’s in store in this brand-new edition...

PROJECTS & TURNING
• MUSIC BOXES: Tony ‘Bodger’ Scott fits music into toys for children
• REVOLVING BOOKCASE: Shaun Newman’s revolving bookcase design saves on space and also features a handy usable surface
• EMERGING BOWL: Colin Simpson opts for something a little more abstract – a turned, well-polished bowl that seems to emerge from another piece of wood 
And much more!

TECHNICAL
• WOODWORKER’S ENCYCLOPEDIA: Peter Bishop is cracking on through the Ss with loads of odd and interesting stuff
• CHOOSING & USING HAND SAWS: John Bullar moves on to discussing hand saws and how these are used and chosen by furniture makers to complete their everyday work
And more!

FEATURES
• ARCHIVE: Robin Gates explores the work of chairmaker Jack Goodchild through an engraving by Stanley Anderson in The Woodworker of March 1957
• THE ALAN PETERS FURNITURE AWARD 2022: For the second year running, this is your opportunity to be part of this prestigious annual award, which champions UK furniture designing and making talent while celebrating the life and work of the late Alan Peters OBE
And more!

ON TEST
• JessEm Rout-R-Lift Prestige
• Shogun 2-in-1 folding knife 

WIN!
In conjunction with Wood Workers Workshop, we’re giving away two pairs of Clear Cut Stock Guides from JessEm – quick and easy to set up, they’ll also improve the consistency and safety of your router table work. Further details can be found inside the issue – good luck!

Believe it or not, our December issue is here! Featuring a good helping of festive projects and themed articles, now’s the time to get creative in the workshop and ensure you have some fun along the way. Our cover star this month is 'Caroline' the Collinson rocking horse. Join Shaun Newman as he gives this family favourite a new lease of life before handing over the reins to his young grandson.

PROJECTS & TURNING

• LATHE-TURNED INSTRUMENTS: Andrew Hall shares his take on a traditional cajón as well as the novel ‘Bowlbro’ design, based on a Dobro guitar
• POP-POP STEAM BOAT: Peter Dunsmore takes a tried and tested design and modifies it to make use of scrap timber and a few basic materials
• ROCKING HORSE RENOVATION: Shaun Newman rescues ‘Caroline – an old Collinson rocking horse  from the basement and gives her a new lease of life.
AND MUCH MORE!

TECHNICAL

• WOODWORKER’S ENCYCLOPEDIA: Peter Bishop ploughs further on into the Ss, culminating in a monologue on shakes
• THIN END OF THE WEDGE: Andy Standing looks at the twin wedged mortise & tenon – a very secure version of an old favourite

FEATURES
• ARCHIVE: Searching for a practical wooden box, Robin Gates is spoilt for choice by the December 1944 issue of The Woodworker
• NORMAN MACKAY IN PROFILE: Combining his love of music and furniture making, Norman Mackay creates truly bespoke pieces that hit all the right notes
AND MUCH MORE!

ON TEST
• RYOBI R18MMS ONE+ MULTI MATERIAL SAW
• QUANGSHENG LUBAN NO.101 BLOCK PLANE
• JOURNEYMAN HANDCRAFTS TOOL ROLL & NAREX MARKING KNIFE
• WIXEY WL133 PILLAR DRILL LASER

WIN!
Ideal for bench top use, the Clarke CTS16 250mm (230V) table saw from Machine Mart is perfect for a variety of cuts in both hard- and softwoods. There’s two up for grabs, so see inside the issue for further details.

We hope you enjoy the December 2021 issue of The Woodworker & Good Woodworking, which is now on sale!

May 2024

April 2024

March 2024

February 2024

January 2024

December 2023

November 2023

October 2023

September 2023

August 2023

July 2023

June 2023

May 2023

April 2023

March 2023

February 2023

The Woodworker is a hands-on magazine aimed at the home woodworker. Its 114 year heritage makes it the authoritative voice on the subject. Edited and written by enthusiasts, there is a real feel for the subject. The Woodworker magazine presents projects and technical advice on all aspects of woodworking, plus news, reviews and tests of the new and most popular tools available. The Woodworker magazine publishes 13 great issues a year

1. You agree that the use of Magzter.com, the application and its services, are at solely at your own risk. Neither Magzter.com nor its associates nor employees nor third party content providers guarantee that the service will be completely uninterrupted or error-free or foolproof against miscreant activities. Nor do they warranty that you will get the exact results as expected or promised by the website or product.

11. THE SERVICE AND ALL PUBLICATIONS ARE PROVIDED ON AN 'AS IS' AND 'AS AVAILABLE' BASIS. MAGZTER, ITS AFFILIATES, SUPPLIERS, LICENSORS AND AGENTS EXPRESSLY DISCLAIM ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. WITHOUT LIMITING THE FOREGOING, NEITHER MAGZTER NOR ITS AFFILIATES, SUPPLIERS, LICENSORS OR AGENTS, MAKES ANY WARRANTY THAT (I) THE SERVICE WILL MEET YOUR REQUIREMENTS, (II) THE SERVICE WILL BE UNINTERRUPTED, TIMELY, SECURE, OR ERROR-FREE, (III) THE INFORMATION THAT MAY BE OBTAINED FROM THE USE OF THE SERVICE OR THAT MAY BE CONTAINED IN THE PUBLICATIONS WILL BE ACCURATE OR RELIABLE, OR (IV) THE QUALITY OF ANY PUBLICATIONS OR THE SERVICE WILL MEET YOUR EXPECTATIONS. YOU ARE SOLELY RESPONSIBLE FOR OBTAINING AND MAINTAINING RELIABLE INTERNET CONNECTIVITY AND YOUR DEVICE. MAGZTER IS NOT RESPONSIBLE FOR YOUR INABILITY TO DOWNLOAD CONTENT. ANY MATERIAL DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE USE OF THE SERVICE IS DONE AT YOUR OWN DISCRETION AND RISK AND YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF ANY SUCH MATERIAL. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM MAGZTER OR THROUGH OR FROM THE SERVICE SHALL CREATE ANY WARRANTY.

2. You will maintain and promptly update that information to keep it true, accurate, current and complete. You are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer, and you agree to accept responsibility for all activities that occur under your account, including the selection and use of all content and services.

2.You will maintain and promptly update that information to keep it true, accurate, current and complete. You are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer, and you agree to accept responsibility for all activities that occur under your account, including the selection and use of all content and services.

3. In no event will Magzter.com or any person or entity or third party involved in the creation, production and distribution of the content on the website and the application be liable in contract or legally for any damages, including and not limited to, direct, indirect, incidental, special, and consequential incurred to you while or on using Magzter.com. By registering on the website or downloading the application, you agree that the provisions mentioned in this section shall apply to all use of and content on the website and the application.

3. Without prior written or authorised permission from Magzter, you should not modify, copy, distribute or sell any content obtained from Magzter as everything published here is the proprietary property of Magzter or its licensors. As such unauthorised use may also violate applicable laws including copyright and trademark laws, Magzter strictly prohibits these and will terminate your access and account if any such illegal activity is proved or detected. You should also stand liable for the damages caused by these unauthorised activities. Except as permitted by the Publication's lawful owner, you acknowledge that you do not acquire any ownership rights by downloading Publications accessed through the Service. Except as explicitly required under copyright law or permitted by the features of the Service you may not modify, reverse engineer, publish, transmit, display, participate in the transfer or sale, create derivative works of, or in any way commercially exploit or provide to a third party the content of the App, the Publications, or any portion of them without the express permission of Magzter and the owner of such content. We do not grant you any licenses, express or implied, to the intellectual property of Magzter or Magzter's licensors.

5. You specifically acknowledge that Magzter.com is not liable for any kind of defamatory or offensive or illegal conduct of other users or third parties or their content and that the risk of injury from the foregoing rests entirely with you.

8. Magzter reserves all rights to monitor the content published and inputted by you for the purpose of determining whether you are compliant with these terms and conditions and other operating rules determined by Magzter. Magzter has the right to take decisions about the content and delete them at its own will.

9. Magzter is a distributor and NOT a publisher of the Publications and so Magzter has no editorial control over the content, including opinions, advice, statements, services, offers etc., that is represented in the magazines. So Magzter will not take responsibility for the accuracy or the reliability for any information or facts provided therein or that is made available through the service, by anyone other than authorised Magzter employees who are acting on their official capacities. Accordingly, we have no editorial control over the Publications. Any opinions, advice, statements, services, offers or other information or content expressed or made available by third parties, including those made in Publications offered by the Service, are those of the respective author(s) or publisher(s) and not of Magzter. Magzter will not be liable for any loss or damage caused by your reliance on information obtained through the Service or from the Publications. The Service may contain links to other Internet sites and third-party resources and Magzter does not assume any responsibility or liability for communications or materials available at such linked sites. These links are provided for your convenience only. You are solely responsible for understanding any terms and conditions that may apply when you visit or place an order through a third-party site.

Details of the objectionable content, including its link on our platform

Download your favorite titles and read them offline, anytime and anywhere

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines and newspapers from thousands of best-selling titles.

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines from thousands of best-selling titles.

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines from {{magCount}} best-selling international titles.

Girish Ramdas is the Co-founder and CEO of Magzter, a New York based startup that has been making waves in the global digital publishing business. Magzter has crossed 80 million users since its inception in 2011 from more than 150+ countries with 1000s of magazines, newspapers and books from more than 4,500 publishers worldwide. He has more than 25 years of experience in cross-platform publishing, including print, mobile, and Web development. During this period, he has co-founded and run three successful start-up businesses. He has enabled magazine companies to go digital and helps them monetize their content across the digital world. Girish's deep industry experience in online, mobile and publishing ecosystems has made him an expert in acquisition, marketing and monetizing digital content across platforms globally.

In the event that you encounter any objectionable content on our platform, we have put in place a grievance redressal policy to address your concerns.

Magzter Inc. (“Company”, “we”, “us” or “our”) knows that you care about how your personal information is used and shared. Please read the following privacy policy (the “Policy”) to learn more about our privacy practices. By visiting any of the websites operated by the Company, and any sub-domains thereof, or using any of our mobile applications and other methods of content distribution (collectively, the “Service”), you acknowledge that you accept the practices and policies outlined in this Policy, and you hereby consent that we will collect, use, and share your information in the following ways.

Magzter Inc. is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 80 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

Magzter is committed to providing a safe and secure platform for our users. Please note that Magzter is merely a platform for publishers to distribute their content. We do not control or endorse the content published on our platform. We cannot be held responsible for the actions of our publishers or their content.

Magzter is not responsible for compensating any party that has suffered damages or incurred costs due to any content, or part of the content, that violates their rights. Magzter is not liable to face any legal action in civil court for any violation of rights caused by any content, or part of the content, that infringes the rights of a third party.

Magzter offers the world’s largest {{allyoucanread}} subscription service called {{gold}} which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

Magzter offers the world’s largest “All-You-Can-Read” subscription service called Magzter GOLD which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

Name

Note: This will only share the cover and the publication information, but not the content.

Please fill out this form if you need any help regarding publishing your content on Magzter

Prior to Magzter, he was the President of Dot Com Infoway (DCI) and Galatta Media. His duties included strategic marketing, partnership development, and monetizing content globally. DCI grew from a small team of 3 in 2000 to 300 by 2011 and was dealing with web, software and app development for clients globally.

Since we launched, Magzter has been committed to partnering with global organizations to provide the greatest possible newsstand technology & service to our customers. Whether you are looking to offer magazine subscriptions to your customer database or just want to learn more, Magzter is committed to helping your business grow. To find out more, please fill out the questionnaire below:

The DMCA allows us to restore the removed content if the party filing the original DMCA Notice does not file a court action against you within ten business days of receiving the copy of your Counter Notice.

This Policy covers Company’s treatment of personally identifiable information (“Personal Information”) and other information about you and your computer or device that Company gathers when you are accessing the Service. We may collect Personal Information from you, as explained in more detail below, and we use this Personal Information internally in connection with our Services, including to personalize, provide, and improve our products, services, content, and advertising, and to allow you to set up a user account and profile, to contact you, to fulfill your requests for certain products and services, and to analyze how you use the Services. In certain cases, we may also share some Personal Information with third parties, but only as described in point 4.

This title is included with your Magzter GOLD subscription

To analyze the quality of content and provide appropriate feedback to publishers

We have designated a Grievance Officer to address any complaints related to objectionable content.

We request that any complaint related to objectionable content be sent to the Grievance Officer through email to the above-mentioned email address. We also request that you provide the following details when making a complaint:

and the App that provides you the capability to order, subscribe to and receive the delivery of various magazines, books, news and magazine and publication related content (collectively known as 'Publications') and to have these digital versions of the Publications delivered to you

c. We also collect information associated with your use of the application in order to make personalized recommendations. If you provide your third-party account credentials to us, you understand some content and/or information in those accounts (“Third Party Account Information”) may be transmitted into your account with us if you authorize such transmissions, and that Third Party Account Information transmitted to the Service is covered by this Policy.

f. The Personal Information we collect allows us to respond to your requests, improve our products and services, customize the advertising and content you see, and communicate with you about new products.

is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 87 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

n. We will also use usage information in order to ensure users adhere to our Terms of Use. For example, a user’s usage information will help us confirm that a user only downloads a magazine or other content a permitted number of times or to a permitted number of devices.

which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

{{magzter}} is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 87 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

The Woodworker Magazine - May 2023

The Woodworker Magazine - May 2023

In this issue

The Woodworker Magazine Description: