CUTTING TOOLS THAT CUT OUT VIBRATIONS

How to say no to vibrations in machining?

- 

Vibrations in machining are generally an un-avoidable part of the metal cutting process. They have a forced or self-excited nature and always accompany a cutting action. Machining vibrations are referred to as “chatter”, highlighting their specific nature, which inheres in every processing where chips are formed. Even if cutting is considered as stable, it does not mean that vibrations do not take place. In this case, the vibrations simply remain on a level that provides the required machining results, and is considered as a “no vibration” operation.

In fact, vibrations in cutting are a damaging factor that reduces performance. Manufacturers make every effort to diminish vibration and, ideally, bring them to a level that does not affect machining results. Chatter is a subject of serious research that has already provided manufacturers with ways to model vibrations in machining which, despite their complexity, can be very effective in finding a way to reduce chatter. However, this modelling takes time and requires various input data, including sometimes additional measurements. In most cases, when manufacturers face vibrations during machining, they only have a few tools at their disposal for a real-time response to decrease the chatter. The most common practice is to vary cutting speed and feed, which usually leads to productivity reduction. Therefore, any effective method of diminishing vibrations that does not adversely affect machining operation productivity will be attractive to manufacturers.