Use PiServer to easily set up a network of Pis connected to a central server, which you control.
The good people of the Raspberry Pi Foundation have outdone themselves once again with the release of PiServer, a tool which enables you to easily set up PXE (Pixie) network booting. In plain English, this means you can set up a network of Raspberry Pis, each of which are connected to a single server. The Pis can boot over the network without any need for microSD cards and you, as the server admin, can control user accounts and accessible files.
The fact that every Pi, as a network ‘client’, uses the same accessible files makes PiServer perfect for classroom environments or workplaces where you may want to use Raspberry Pis for specific purposes such as teaching or operating machinery.
You can create as many users as you need during setup. These users don’t have root privileges, meaning they cannot install new software; this makes for a much better and safer learning environment.
In order to get started setting up your network, you’ll need at least one Raspberry Pi 3 and an Ethernet cable to connect each one to the router or network hub. The PiServer tool is currently available via Debian with Raspberry Pi Desktop. Follow the steps in the guide below to install it on a dedicated PC for best results, although you can also set up your server using a virtual machine or even a Raspberry Pi (see below).
01 Enable network boot
This story is from the Issue 45 edition of Raspberry Pi.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the Issue 45 edition of Raspberry Pi.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber? Sign In
Kodak Pi Notification Lamp
Another mashup of retro and modern tech, this voice-activated Kodak lamp uses a Pi Zero W and Unicorn HAT.
Xbox Zero Arcade Pt 1
Let’s make a self-contained arcade machine out of old bits of kit, a spare Xbox pad and a Pi Zero!
Boot Your Pi 3 B+ From USB
Configure and boot up your Raspberry Pi3B+ using a USB flash or hard drive
Create A Raspberry Pi Network With Piserver Tool
Use PiServer to easily set up a network of Pis connected to a central server, which you control.