Life doesn’t always go as planned. Case in point, our junkyard 5.3L series. Things started out well enough in Part 1 when we replaced the stock cam and springs with an LS9 cam and LS3 springs. This $100 swap netted an increase in power from 342 hp and 373 lb-ft of torque to 402 hp and 379 lb-ft of torque. Nothing like an extra 60 hp for $100, but we were just getting started. We purposely added the factory blower cam to our 5.3L because we knew we had a blower waiting to be installed. After installation of the Vortech supercharger in Part 2, the power output jumped from 402 hp and 379 lb-ft of torque up to 581 hp and 504 lb-ft of torque from the supercharged 5.3L. This power output came at a peak boost pressure of 10.2 psi.
Naturally, we were happy with our newfound power, but we couldn’t help but wonder if there was even more power to be had from the combination, so we decided to apply a few more modifications in an effort to push the peak numbers at least above the 600hp mark. After putting the supercharged (junkyard) 5.3L back up on the dyno for more testing, we discovered the motor had been hurt, either as it came from the junkyard or (more likely) sometime during testing in our previous session. A peek through the open exhaust valve in cylinder seven revealed damage to the piston. Our test motor was officially dead!
This story is from the December 2019 edition of Car Craft.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the December 2019 edition of Car Craft.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber? Sign In
PROJECT MUSTANG PART 5
The Father & Son Mustang Gets Much-Needed “Releaf” With a Rear Suspension From Summit
Project Mustang Part 4
Father and Son Replace the Window in a ’69 Mustang— and the Car Survives, Too!
GIFT HORSE
Byron Tudor Surely Made the Most of What Started Out as a Freebie
CHANNELING
Once Owned by “Dyno Don” Nicholson, This ’62 Chevrolet Bel Air Has Been Given an LS Swap by its Current Owner, Frankie Trutanic
Gettin' Back To Basics
A Proud Son Keeps his Father’s Gasser Legacy Alive
Kegalodon!
Shark Week Inspires Us to do Something Really Wrong, All in the Name of Science
Supreme Cutlass
A Son Falls in His Father’s Footsteps, Building an Olds Cutlass for the Ages
Project Update: Gen 3 Coyote
We’re about a third of the way through engine dyno testing on our Gen 3 Coyote crate engine.
The 2016 Midnight Drags
Go Fast, Win Cash!
Tested At The Strip!
Mickey Thompson Pro Drag Radial vs. ET Drag.