Poging GOUD - Vrij
SHOWCASE Paul's Engine
Model Engineer
|4635
One day my son Paul came to me and asked if we could make something in my workshop, so that he could learn engineering processes.
-
After consideration I came up with a version of a ‘desktop toy’; the reason for this choice, strange for a beginner, will be revealed later.
Dit verhaal komt uit de 4635-editie van Model Engineer.
Abonneer u op Magzter GOLD voor toegang tot duizenden zorgvuldig samengestelde premiumverhalen en meer dan 9000 tijdschriften en kranten.
Bent u al abonnee? Aanmelden
MEER VERHALEN VAN Model Engineer
Model Engineer
WORKSHOP TIP - Boring Eccentrics
I am making a 1 inch Minnie traction engine and have arrived at the machining of the eccentric straps.
3 mins
4635
Model Engineer
Wenford A 7¼ Inch Gauge 2-4-0 Beattie Well Tank
The stage has now been reached where the well tank body can be completed but beforehand there are some internal details to add.
4 mins
4635
Model Engineer
Vertical Boiler Locomotives
Vertical Boiler Locomotives
4 mins
4635
Model Engineer
Union Nuts, and How to Make Them
These are quite different from those commercially available and are made from copper
3 mins
4635
Model Engineer
SHOWCASE Paul's Engine
One day my son Paul came to me and asked if we could make something in my workshop, so that he could learn engineering processes.
1 min
4635
Model Engineer
CLUB NEWS
My secret’s out!
9 mins
4635
Model Engineer
Building Dancer - The Boiler
Dancer needed a boiler that would be somewhat larger than the size permitted under the Model Engineering exemptions in the New Zealand regulations.
10 mins
4635
Model Engineer
An Inverted ‘Ross Yoke' Watercooled Stirling Engine
As with all my hot air engines they are cheap to build, mostly from scrap
5 mins
4635
Model Engineer
A Draught Proposal
A Draught Proposal
12 mins
4635
Model Engineer
A Boiler Feed Pump
A Boiler Feed Pump
2 mins
4635
Translate
Change font size