Prøve GULL - Gratis
Dermie's Art Project
Classic Trucks
|June 2017
Saga of a Fanatically Detailed ’48 Chevy

The saga of Dermie Close and his 1948 Chevy 3100 starts out not all that different from a thousand other classic truck owner’s stories, but it takes on an unusual fanatical twist partway through, a twist that made it take over 20 years to complete.
Dermie’s first car was a truck; he was in his senior year of high school and bought a 1950 Chevy pickup from his neighbor, Clyde Denham, for $500. That old 1950 Chevy served Dermie well, and after high school the 3100 helped him leave California for Arizona where he enrolled at Arizona Automotive Institute (AAI) to gain certification as an auto mechanic.
After graduating AAI in 1974 Dermie hopped in his 1950 Chevy and returned to California to work as a line mechanic at a SoCal Chevrolet dealer. One morning on the way to work the 1950 puked out its transmission and completed the journey on the hook of a tow truck. Dermie pulled the blown transmission out with its 216-inch six-cylinder engine still attached and installed a small-block V-8 with an automatic transmission. The archaic torque tube was swapped out for a modern open driveline, and a friend repainted the truck in a custom color. Dermie said that’s where his love for hot rods began. The ’50 looked pretty good; good enough that the Snap-on man bought it, and with the money Dermie moved to Utah.
Denne historien er fra June 2017-utgaven av Classic Trucks.
Abonner på Magzter GOLD for å få tilgang til tusenvis av kuraterte premiumhistorier og over 9000 magasiner og aviser.
Allerede abonnent? Logg på
FLERE HISTORIER FRA Classic Trucks

Classic Trucks
WHEN ONE THING LEADS TO ANOTHER …
The Hollman “Family” Chevys
2 mins
March 2020

Classic Trucks
TOP PRIZE
Raybestos Commissioned This ’53 Chevy and Promptly Gave it Away
3 mins
March 2020

Classic Trucks
TAILGATE
Heavy Chevy
1 min
March 2020

Classic Trucks
GOLDILOCKS' TRUCK
Careful Attention to Detail Make This Ford Just Right
5 mins
March 2020

Classic Trucks
INFERNO
Frank Dill’s ’52 Ford F-1 Packs a Big Horsepower Punch
4 mins
March 2020

Classic Trucks
Daring To Be Different
Oddball, Orphaned, and Overlooked Trucks
4 mins
March 2020

Classic Trucks
Professor Hammer's Metalworking Tips
Q. I have a Miller Multimatic 215 welder. In the TIG mode, I often weld 20-gauge sheet metal using 1 ⁄16 tungsten at 35 amps, using a 1 ⁄16 filler rod. I have the welding helmet turned as far down as it will go (shade 9) with a closeup lens, and a 100-watt light source close to the weld. I cannot see where I’m going with the weld.
2 mins
February 2020

Classic Trucks
Stealth Mode
David Zambon’s ’53F-100 is an Exercise in Subtlety
4 mins
February 2020

Classic Trucks
Extra Special
This Rare ’65 Chevy C10 Stageway Crew Cab Wears Some Corvette Details
4 mins
February 2020

Classic Trucks
Vintage Lines Powered By Modern Muscle
Modern Supercharged Performance in a ’50s Wrapper
6 mins
February 2020
Translate
Change font size