कोशिश गोल्ड - मुक्त
CRIMPING THE .45 COLT
Handloader
|February 2021
BULLETS & BRASS
Q: A friend recommended that I try cast bullets from RCBS mould No. 45-250-FN to obtain better accuracy in my USFA PreWar model .45 Colt. He gave me a few handfuls of unsized bullets to try. However, when I went to load them, I noticed that their weight was actually 264 grains instead of the indicated 250 grains. Should I reduce my normal 6.0-grain charge of Alliant Red Dot powder? If so, by how much?
Also, in looking at this bullet design, I am not sure where to apply the crimp. It appears that it has two grease grooves and no crimp groove. Your thoughts would be greatly appreciated!
Incidentally, I read Handloader from cover to cover every issue. I thoroughly enjoy your articles as well as those by John Barsness and Mike Venturino. Please keep up the great work. New Castle, PA
A:
यह कहानी Handloader के February 2021 संस्करण से ली गई है।
हजारों चुनिंदा प्रीमियम कहानियों और 10,000 से अधिक पत्रिकाओं और समाचार पत्रों तक पहुंचने के लिए मैगज़्टर गोल्ड की सदस्यता लें।
क्या आप पहले से ही ग्राहक हैं? साइन इन करें
Handloader से और कहानियाँ
Handloader
OEHLER's New System 89 Chronograph
Measuring Bullet Performance Downrange
11 mins
June - July 2022
Handloader
The Problem with Low Pressure Loads
Bullets & Brass
9 mins
June - July 2022
Handloader
Measurements for Rifle Handloading
Handy Techniques for Accurate Ammunition
10 mins
June - July 2022
Handloader
THE BRASS RING
In Range
6 mins
June - July 2022
Handloader
Semi-custom Bullet Moulds
Mike's Shoot in' Shack
4 mins
June - July 2022
Handloader
REVISITING THE 6.5 -06 A-SQUARE
Loading New Bullets and Powders
9 mins
June - July 2022
Handloader
Cimarron Stainless Frontier .45 Colt
From the Hip
5 mins
June - July 2022
Handloader
9x18mm Makarov
Cartridge Board
5 mins
June - July 2022
Handloader
Alliant 20/28
Propellant Profiles
5 mins
June - July 2022
Handloader
.224 Clark
Wildcat Cartridges
6 mins
June - July 2022
Translate
Change font size