THE WORKINGS OF AN ATOMISER AND ITS MYRIAD APPLICATIONS

Atomisers are used everywhere where a liquid needs to be distributed in a specific and efficient way across a surface or through a space.

- 

Some ways in which sprays differ are in the drop size, spray pattern, and angle of application

All of us have had this experience at some point: you wake up, find out you’re late for a class or meeting, clean up, put on some nice clothes, and run. When you finally get to where you need to be, you’re sweating. You pull out a small deodorant bottle from your bag, give yourself a spray, and you’re set. Wasn’t that handy? The spray nozzle, also known as an atomiser, is a nifty piece of technology that creates a mist of particles from a liquid on demand. Liquids are easier to store whereas a spray spreads better. Thus some enterprising engineers invented the atomiser to allow you, and in fact many industries in the world, to make the best of both worlds.

What is an atomiser?

An atomiser is a device that creates a spray. A spray is in turn a collection of drops that disperses as gas. There are different kinds of atomisers based on the kind of spray required. Since there are many hundreds of scenarios where sprays are required — including injecting fuel into internal combustion engines, manufacturing steel, and to irrigate gardens and quench small fires — atomisers are also expected to have different abilities.

Some simple ways in which sprays differ are in the drop size, spray pattern, and angle of application.

There are at least two ways to measure spray drop sizes: by the drops’ average surface area or average volume. Some use a statistical figure called the Relative Span Factor (RSF). It denotes the distribution of drop sizes as a ratio of the size difference between the largest and smallest drops to the median size. If the RSF is close to 1, it means the spray is close to being very evenly sized.