On the disc

Discover the highlights from this month’s packed DVD!

- 

USING THE LXFDVD

Using Linux for the first time can be very confusing. It’ll most likely be unlike anything that you’ve operated before, especially if you’re used to Microsoft Windows or Apple macOS.

Generally our DVDs are designed to be run directly, which is to say that when you first power on your PC (or Mac, see below) it should ‘boot’ from the DVD – so before Windows or macOS even starts to load – with Linux running directly from the DVD. This trick is known as a Live Disc. It enables you to try out the various versions of Linux without having to install or change anything on your PC. Just remove the DVD, restart your PC and it’ll be exactly as you left it.

While many systems will boot from a DVD when it finds one, many will not. See below for the standard process for enabling booting from a DVD on various desktops and laptop PCs.

The alternative option is to locate the ISO file on the DVD and write this to your own USB thumb drive and attempt to run that. We recommend using Etcher from https://balena.io/etcher that’s available for Windows, macOS and Linux. Good luck!

BOOT THE DISC

Many PCs should boot automatically if they’re turned on with a disc in the drive. If not, many offer an early Boot Menu accessed by tapping a key while powering up from cold: F9 (HP), F12 (Dell, Lenovo), F8 (Amibios) or F11 (Award BIOS). Alternatively, use the BIOS/UEFI to adjust the boot order to start with the optical drive. Again, this is accessed by tapping a key during power-up, usually Del but sometimes F1 or F2.

Some new UEFI PCs require access via Windows: holding Shift select its Restart option. If you’re still having problems using the DVD then visit www.linuxformat.com/ DVD support