Record Your Electric Guitar

Recording your guitar doesn’t have to be a brain-melting experience. With the help of legendary producers, we take the pain out of capturing the sounds of your electric guitar...

- 

Recording electric guitars is different to recording acoustics – you’ll most likely be micing up an amp for starters – but many of the same ideas can apply. An electric guitar amp outputs fairly high sound pressure levels (SPL), so if you’re close micing your cab with your amp cranked, you might want to consider using a dynamic mic or a condenser mic with a pad switch.

Get close

Many engineers like to close-mic amps and cabs with a dynamic mic and, believe it or not, placing the mic at different points in front of your speaker has a huge effect on the sound you capture. Start with the microphone 1cm-to-3cm away from the grille, pointing halfway between the centre and edge of the speaker. Moving the mic by just a couple of centimetres will change the sound. As a general rule, micing the centre gives you a bright sound, while moving the mic towards the edge of the cone makes things progressively darker. Moving the mic away from the amp introduces ambience to the sound.

No control room? No problem