Back To Basics!
ET Polymers|February - March 2017

Water turns to ice when frozen, and at room temperature ice turns back to water. So on similar lines, if plastic is made from crude can we turn it back to hydro carbon fuel?

Medha Tadpatrikar
Back To Basics!

Most of us progress through life without giving much thought about our surroundings. After a while we stop noticing things. Everyday our life in city is filled with lots of trials and tribulations that waste is least of our worries until something does not work. We were also one those who knew about plastic waste and its implications but didn’t give it much thought. Then we witnessed an incident that made us think and ask questions!

Impact on Nature

In 2009, I along with my partner Shirish Phadtare had gone to one of the wildlife sanctuaries with our respective families. One morning our guide informed us that our route has been changed. As natural curiosity we inquired about the reason, and we were told that it’s because of the death of some deers. Next day naturally our interest was piqued when we discovered the real reason for death of those deers. We had assumed that some wild animal would have been responsible for those deaths. Later we found out that the reason for the death was plastic in the stomach of the deers. Naturally we were appalled with this news. For most it would have been a story to be talked about at the dinner parties but for us, it was a turning point in our life.

Although, we did not give it much thought but for next few months every time we used to discuss about this trip we used to feel frustrated about the waste plastic and used to say to each other someone should do something about this environmental menace. There should be strict penalties for people who throw garbage on roadside. I guess after repeating similar conversations, we both thought of understanding the problem of waste plastic and to see if we could find a solution to this.

Knowledge gathering

هذه القصة مأخوذة من طبعة February - March 2017 من ET Polymers.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 8500 مجلة وصحيفة.

هذه القصة مأخوذة من طبعة February - March 2017 من ET Polymers.

ابدأ النسخة التجريبية المجانية من Magzter GOLD لمدة 7 أيام للوصول إلى آلاف القصص المتميزة المنسقة وأكثر من 8500 مجلة وصحيفة.

المزيد من القصص من ET POLYMERS مشاهدة الكل
The Changing Face Of Mobility
ET Polymers

The Changing Face Of Mobility

A brief look at the salient points on how plastics is transforming automotive manufacturing

time-read
6 mins  |
Aug-Sept 2021
Nippon Launches Weatherbond PRO
ET Polymers

Nippon Launches Weatherbond PRO

Nippon Paint (India) Private Limited (Decorative Division) Asia’s leading paint manufacturer launched the advertising campaign for Weatherbond PRO – the high durable exterior emulsion offering up to 15 years of protection against extreme climate conditions like prolonged exposure to heat, and heavy spells of rain. Based on extensive research done by Nippon Paint’s R&D team, this product was developed for customers who need advance protection for their home exteriors in terms of extended fresh look, strong waterproofing and protection from Algal and Fungal attacks.

time-read
1 min  |
Aug-Sept 2021
Low-Pressure Molding Adopted Across Industries
ET Polymers

Low-Pressure Molding Adopted Across Industries

Henkel’s Technomelt Low-Pressure Molding technology meets demands for encapsulation of electronics and medical components

time-read
4 mins  |
Aug-Sept 2021
TotalEnergies and Jindal Films To introduce Certified Circular Polypropylene
ET Polymers

TotalEnergies and Jindal Films To introduce Certified Circular Polypropylene

TotalEnergies and Jindal Films have joined forces to produce more sustainable flexible food packaging and labels. Using advanced recycling technology from Plastic Energy, TotalEnergies will supply Jindal Films with Certified Circular Polypropylene produced from postconsumer plastic waste. This new value-chain collaboration will divert plastic waste currently destined for incineration and landfill because it is too complex to recycle through existing schemes.

time-read
2 mins  |
Aug-Sept 2021
Lenzing's VEOCEL™ Brand Launches Hydrophobic Lyocell Fibres With Dry Technology
ET Polymers

Lenzing's VEOCEL™ Brand Launches Hydrophobic Lyocell Fibres With Dry Technology

In its quest to drive greater sustainability in the personal care and hygiene industry, the VEOCEL™ brand has launched a new offering: VEOCEL™ branded lyocell fibres with dry technology which are naturally smooth and gentle on skin, ensuring comfort for sensitive skin. Absorbent hygiene products are an indispensable part of many consumers’ lives and are relied upon daily. As these are essential items, it is important that they should offer maximum comfort and relief to the user. This is demonstrated by the new VEOCEL™ branded lyocell fibres which have the capacity to provide a high level of comfort, softness and dryness, when applied in these types of products.

time-read
1 min  |
Aug-Sept 2021
Simulating Injection Molding for Efficiency
ET Polymers

Simulating Injection Molding for Efficiency

Producing high-quality, plastic injection-moulded parts more quickly and cost-effectively has become a critical factor for manufacturing success in today’s global market. Instead of engaging in slow, expensive prototype iterations and test cycles to satisfy manufacturing requirements, designers, mold makers, and manufacturing professionals can leverage SOLIDWORKS® Plastics mold-filling simulation software to optimise parts for manufacturability, refine tooling to improve quality and shorten cycle times to reduce manufacturing costs

time-read
10 mins  |
Aug-Sept 2021
Leveraging 3D Printing for optimised Injection Molds
ET Polymers

Leveraging 3D Printing for optimised Injection Molds

A guideline from Formlabs on the factors to consider before using stereolithography (SLA) 3D printed molds in the injection molding process to lower costs, reduce lead times, and bring better products to market

time-read
8 mins  |
Aug-Sept 2021
iglidur I151 for FDA-compliant, Detectable, Wear Resistant Parts In Food Technology
ET Polymers

iglidur I151 for FDA-compliant, Detectable, Wear Resistant Parts In Food Technology

igus has developed a blue, food-compatible tribo-filament for cost effective 3D printing of special parts. iglidur I151 is blue, prints easily, and has an optimal coefficient of friction and wear. The new tribo-filament is a refinement of the easy-to-machine igus iglidur I150 all-rounder filament. Because it is blue, it can be used to manufacture special parts that are optically detectable in the food industry. Food compatibility according to the FDA and to EU Regulation 10/2011 also qualifies the high-performance polymer for use in the food and cosmetics industries.

time-read
1 min  |
Aug-Sept 2021
Exceptional Warpage Control
ET Polymers

Exceptional Warpage Control

SABIC’s new LNP™ THERMOCOMP™ compounds deliver exceptional warpage control

time-read
5 mins  |
Aug-Sept 2021
Digital Transformation in Plastics
ET Polymers

Digital Transformation in Plastics

Automation in the plastics industry is becoming more complex, the pace of innovation is accelerating, and competitive pressure is increasing. Open and safe automation makes it possible to combine traditional mechanical engineering with the latest Industry 4.0 technologies – Lets take a look at how Industry 4.0 is transforming the plastics sector

time-read
8 mins  |
Aug-Sept 2021