يحاول ذهب - حر
Four Cylinder Mark Webber Engine
December 2017
|Stationary Engine
A friend, John Steel, recently purchased a four-cylinder Mark Webber engine; it was a nonrunner at that time.

After freeing off the stuck valves and fitting new sparkplug leads, the old ones being badly cracked, a little petrol was poured into the priming cups and she was cranked over, giving a few chuffs. Encouraged at this, petrol was pumped into the fuel bowl and after a couple of swings, (it takes a good swing on the handle as there is no impulse on the magneto) she started and ran OK proba
هذه القصة من طبعة December 2017 من Stationary Engine.
اشترك في Magzter GOLD للوصول إلى آلاف القصص المتميزة المنسقة، وأكثر من 9000 مجلة وصحيفة.
هل أنت مشترك بالفعل؟ تسجيل الدخول
المزيد من القصص من Stationary Engine

Stationary Engine
Lister Conundrum?
Back in 2016 a discussion took place on Fozzer’s Forum about early Lister J type engines; as I have a very early Lister 2 ½ hp, I was interested and took part in the discussion. I have always had an interest in Lister engines, having nine in my shed, all of which are restored, except a spec 52 Lister A. I had never delved into the history of these engines as I considered that just about everything was known about them, through the work done by the late David Edgington, and information is readily available.
5 mins
April 2018

Stationary Engine
Rogues' Gallery Pt2
Some engines have remained unidentified for a number of years – unless YOU, the reader, know differently….!
1 min
April 2018

Stationary Engine
Coventry Victor Stationary/Marine Engines
Following a comment in the January edition of Stationary Engine, that Coventry Victor engines were rarely seen on our rally fields and as I have a liking for these engines (and flat twins), I have put together a short article based on my three examples.
2 mins
April 2018

Stationary Engine
Turner Manufacturing Co- Simplicity Engines
Having seen the little vertical Simplicity engine on the front cover of the October 2017 issue of Stationary Engine, where the name Western Malleable & Gray Iron Company, Milwaukee cast into the flywheel rim, is clearly legible, I decided the manufacturer required further investigation
1 mins
April 2018

Stationary Engine
Christmas Crank-Ups Riccall
Winter crank-ups and open days have become increasingly popular in recent years and one of the biggest I have ever attended was held in the village of Riccall, near York on Saturday 30th December.
2 mins
April 2018

Stationary Engine
Petter Standard Oil Engine
I am sure that the Petter Handyman engine will be a familiar sight to many engine enthusiasts, but the same cannot be said for the ‘Petter Standard Oil Engine’; the engine on which the Handyman engine was designed.
1 min
April 2018

Stationary Engine
Clarendon Rally- Australia
Whilst on a recent trip to visit my family in Australia I took the opportunity to visit, with my son, the well known Clarendon Classic, Machinery, Truck and Hobby Show, which has been held for many years at the Hawkesbury Showgrounds, on Racecourse road, Clarendon, NSW on the weekend of the 16/17th September 2017.
1 mins
April 2018

Stationary Engine
Blackstone Compressors
Blackstone Compressors
1 min
April 2018

Stationary Engine
The Warwick DC Generating Set
I was recently invited to inspect a small generating set belonging to Colin Williams from Horsham in Sussex.
2 mins
January 2018

Stationary Engine
Unusual Lister Engines
With the West Oxon Steam Rally 2017 drawing out a large collection of Lister Engines, here are a few of the more unusual models seen.
2 mins
January 2018
Translate
Change font size