There are many methods of anchoring the loads from a yacht's standing rigging to her hull. But how often do any of us think to check them? Traditional wooden boatbuilding techniques persisted in many glassfibre yachts from the 1960s to the mid-1990s, which have the chainplates brought down through the deck and secured directly to a bulkhead. However, since the 1960s just about every boatbuilder has moved away from iron to stainless steel. Many yachts now use a flat bar of stainless with some form of plate welded on to create a deck seal, and sometimes a suitable cant (bend) above the deck to create the correct angle for the wire standing rigging, which reduces rig fatigue by lessening the 'working' of the wire.
Due to changes in rigs and production methods (and the desire to make the internal space of a yacht more open-plan), yacht designers have gradually moved away from relying on a bar bolted to a main bulkhead as the means to anchor it. Many builders have for years used a D-bolt, while others had nice A-bolts manufactured. In all cases there ought to be some form of hanger or rod that picks up the loading and anchors it to an internal stringer, strut, frame or form of bulkhead.
Boxing not clever
On several ranges of yachts, the designers have brought the chainplates through the deck, down into the saloon, and then boxed them in so they can't be seen.
While it may look good, it's a bad idea from an assessment point of view. I've attended a few rig failures on unsinkable yachts, where, on accessing the internal moulding, the chainplate roots were found bonded into the hull using a small, perforated stainless steel plate with a threaded bar welded to it. Water ingress, through a leaking deck seal, had soaked the plate which caused it to fail spectacularly from crevice corrosion.
This story is from the Summer 2023 edition of Practical Boat Owner.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the Summer 2023 edition of Practical Boat Owner.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber? Sign In
Shearwater sloop sailing in the 1960s
Genevieve Leaper shares her late father John Leaper's recollections-compiled from handwritten notes-of cruising the Channel
Timing an Atlantic crossing
Professional meteorologist and sailor Chris Tibbs shares his knowledge of how to choose the best time to sail 'across the pond'
Transatlantic first
It's 70 years since Ann Davison became the first woman to sail solo across the Atlantic. Katy Stickland looks back at her achievement
Going dizzy on an island sailing odyssey
Ken Fowler becomes the first sailor to circumnavigate every island in England and Wales-and all done in a 4m dinghy!
Boats for coastal cruising
Duncan Kent chooses a selection of the best sail and motor boats under 40ft most suitable for adventurous cruising along the coast
Industry view on HVO
The RYA, IWA and CA are working to help recreational boating transition to a Net Zero future, as the CA's
HVO RENEWABLE DIESEL Myth or miracle?
A new generation of biofuel that's cleaner, greener, better for your engine and less prone to microbial growth sounds too good to be true... but the facts beg to differ
Little ships and the wrong sort of waves
Why the correct manoeuvres for the sea conditions will reduce hogging and sagging stress on both ship and crew
Watching boats, saving jerseys
It's amazing what you can see from a hospital window if it's the right hospital
Sweating the mooring asset
Sam Llewellyn looks at ways of getting top value out of his boat's swinging mooring