Andover Model-One
Stereophile|September 2020

Apart from the Beatles and Hendrix I heard in my audiophile father’s basement, one of my earliest rock’n’roll memories involved a multipurpose record player at school. In third grade, six of us were moved as a separate group to a round table to watch a filmstrip in a darker part of a large, open-plan classroom. A clunky old record player in a self-contained carrying case with a half-dozen headphone jacks sat on the table. We each plugged in a pair of headphones to hear the soundtrack for the filmstrip we were instructed to watch— unsupervised. Ben discreetly pulled out his older brother’s LP of Queen’s The Game and played it instead. I don’t remember the filmstrip, but “Another One Bites the Dust” is etched in my memory. In spite of that rock anthem’s insistent heavy bass riff, we 8-year-olds somehow managed to sit still enough to get away with it.

I was hooked.

Fast-forward to the present, when integrated vinyl playback systems have come a long way with technology, materials, and design. Still, an “all-in-one” system can raise an audiophile’s hackles, and for, um, sound reasons (pun in-tended): The more you pack into a single chassis (or speaker enclosure or whatever), the more can go wrong. There are noise considerations and spatial limitations, vibrations and feedback. Some audiophile readers might be reminded of furniture-like stereo consoles from their youth that, while some of them sounded pretty good, were not the pinnacle of hi-fi.

Now Andover Audio has created the Model-One, an integrated turntable system that’s intended to have broad crossover appeal, or anyway, to appeal to music lovers who aren’t members of the audiophile set. I noticed that the Model-One intrigued some guests of audiophile attendees when I first encountered it at the 2019 New York Audio Show.

The Model-One packs a lot into a single enclosure: a record player with speeds of 33.3, 45, and 78rpm; an internal phono preamp and amplifier; an ADC and a DAC; a headphone amp; and built-in speakers. It comes with a matching, full-function remote control. All this can be yours for just $1999.


Description Integrated music system with belt-drive turntable, phono preamp, amplification, DSP, DAC, headphone amp, and builtin speakers. 200W total amplification (2 × 70W to woofers; 2 × 30W to tweeters). Acoustic frequency range: 55Hz–30kHz ±3dB (under lab conditions). Turntable motor: 24-pole AC synchronous driven by digitally synthesized 2-speed electronic control. Platter: 12 acrylic with felt mat. Speeds: 33.3/45/78rpm, adjustable ±3%. Wow and flutter: <0.2%. Tonearm: 8.6 single piece, carbon fiber. Phono cartridge: Ortofon 2M Silver. Inputs: Optical (TosLink S/PDIF) up to 24/192; Coaxial digital up to 24/192; Mini-USB (input/ output) 16-bit, 44.1kHz, 48kHz (Mac and PC compatible). Line output: RCA, 1V, variable with volume control; 100Hz high-pass filter @ 24dB/octave when Subwoofer On is selected.

Subwoofer output: 1000mV, variable with volume control; 200Hz low-pass filter @ 12dB/octave. Headphone output: 150mW @ 16 ohms. Frequency range: 20Hz– 20kHz. Power consumption: 24V DC/6A. Standby power consumption: <0.5W.

Dimensions 18” (446mm) W × 8.5” (215mm) H × 13.5” (356mm) D. Weight: 35lb (15.9kg); shipping, 41lb (18.6kg).

Serial number of unit reviewed 01461910004

Price $1999. Subwoofer, $799; modular stands, $299/$199 each. Warranty: Full refund within 30 days of order date (online; dealer policies may vary) and 2-year parts and labor. Approximate number of US dealers: Five (more coming online); also sold direct.


Andover Audio, LLC 15 High St. North Andover, MA 01845 Tel: (978)775-3670 Web:

A moment’s thought leads one to the conclusion that a turntable sitting on top of a loudspeaker is problematic. Loudspeakers vibrate. Turntables—rather, phono cartridges are designed to respond to vibrations.

To address that challenge, and other sonic challenges inherent in an integrated turntable all-in-one unit, the Model-One leverages sophisticated audio technologies, including specialized DSP, that were originally developed for other product categories and applications.

I spoke with Bob Hazelwood, Andover’s director of product development/ head engineer, via Skype. Andover Audio, he told me, is a new brand, but the company is not new; it has been designing and supplying OEM components for a range of well-known brands, going back to Cambridge SoundWorks, which was co-founded in 1988 by Henry Kloss (with Tom DeVesto) as a pioneer at selling consumer electronics direct, first via magazine ads, then retail stores, then online, via CompuServe, before the Internet was even a thing.1 In 1997, Singapore-based Creative Technology, manufacturer of Sound Blaster sound cards, purchased Cambridge SoundWorks along with other pro-audio companies, including E-mu Systems and Ensoniq, to combine and further develop DSP software and other technologies. Years later, in 2012, a deal was struck to separate the OEM business, which launched as Andover Audio. Eventually, the company started to sell products with the Andover brand.

Ironically (given the original company’s early history as online sales pioneers), Hazelwood says that the Model-One is best sold in person, through dealers, although it’s available online direct.

“We designed it for the average person but in a way that an audiophile wouldn’t find lacking,” Hazelwood says. “We shot for what we thought was the point of diminishing returns while not cutting too many corners.” Accordingly, Andover specified certain parts from known audio manufacturers.

Obviously, the Model-One system was made to appeal to vinyl fans: It has a Pro-Ject turntable portion—specifically a Debut Carbon Esprit SB, a belt-driven design made in the Czech Republic that costs $599 at retail equipped with either the same or a very similar 8.6 carbon-fiber tonearm and an Ortofon 2M Red moving-magnet cartridge. The stock cartridge on the Andover is an Ortofon 2M Silver, which Ortofon says is a step up from the Red; it has silver-plated copper coils as found in the 2M Bronze and Black but with fewer windings.

The Model-One uses a hybrid phono preamp with a mixed topology of active low-frequency and passive high-frequency EQ stages prior to conversion. Hazelwood explained in an email: “The reasoning behind this is that the passive high-frequency pole more accurately follows the RIAA curve at the top end, and the active low-frequency poles avoid the dynamic range limitations that the RIAA curve would create with a totally passive EQ design.”

The tonearm and cartridge ship attached, so only basic user assembly is required: placing the platter, belt, and counterweight; balancing the tonearm; and adjusting the tracking and anti-skate force. All the necessary parts are included.

The cartridge is of course replaceable, and the 2M series allows you to upgrade by changing out the stylus; a 2M Blue stylus would be an upgrade. I considered swapping in another cartridge but figured most Model-One buyers will stick with the stock Ortofon at least for a while; it’s a good entry point. The manual guides the user through the handful of setup steps—and covers the system’s other functions and features—but I’d suggest watching the video illustrating the Model-One’s setup.2

Continue reading your story on the app

Continue reading your story in the magazine


Fun with Moose and Squirrel

’Cause, it’s hard to say what’s real / When you know the way you feel —Flaming Lips, “One More Robot/Sympathy 3000-21,” from Yoshimi Battles the Pink Robots

4 mins read
June 2021

Marten Parker Trio Diamond


10+ mins read
June 2021


The bijou sub We have inherited an infinitely vast library of recorded musical art, the majority of which is well-recorded but has yet to be fully and completely reproduced.

10+ mins read
June 2021

Clearaudio Concept Active Wood


10+ mins read
June 2021

Focal Aria K2 936


10+ mins read
June 2021


THIS ISSUE: Herb Reichert on the dCS Bartók; Ken Micallef reprises his Schiit Sol review, trying it out with some better ancillaries.

10+ mins read
June 2021


In its sixth year, International Anthem seriously stepped up production. 2020 saw the Chicago label releasing a fast succession of rewarding albums, including a standout disc by Tortoise guitarist Jeff Parker and adventurous jazz by Rob Mazurek and the collective Irreversible Entanglements.

3 mins read
June 2021

The magnificent eight

The Story of the Grateful Dead, a 14-LP, 8-album collection of Grateful Dead recordings with booklet and deluxe packaging, from Vinyl Me, Please (VMP-A006, 2020), is intended as a curated sampling of the high points in the Dead’s extensive catalog. The first seven albums were cut from analog tape, while Without a Net comes from the original digital master. The sound is breathtaking.

4 mins read
February 2021

T+A Solitaire P headphones and HA 200 DACheadphone amplifier

What I categorize as mainstream, dealer-based, fancy-pants stream-ers and big-speakers audio is actually only the gold-plated tip of a gigantic asteroid-like monolith that extends (underground) from New York to Hong Kong, from the Arctic Circle to Antarctica. This immense audio-social mass is mostly invisible to the Madison Avenue mainstream, but simple Google searches expose millions of proletarian audio-gear constructers (DIY’ers) working in shops, basements, and garages, scratch-building everything from turntables to tonearms to phono cartridges, to capacitors and vacuum tubes, to amplifiers, headphones, ribbon and electrostatic speakers.

10+ mins read
February 2021


The title of this set—4 CDs and a book—comes from British suffragette Emmeline Pankhurst’s call to arms for women to fight for their rights: “You have to make more noise than anybody else,” said Pankhurst, who died in 1928.

9 mins read
February 2021


Carrera models encasing the manufacture Calibre Heuer 02 have been available since 2018, but the series lacked a classic version with a closed dial. Now TAG Heuer has closed that gap in the line in an attractive way.

7 mins read
Watch Time
March - April 2021

DRONE TOOLS Safely using autonomous flight modes

In the early days of aviation, as aircraft range and endurance increased, so did the fatigue experienced by pilots. Autopilots were invented in 1912, guiding aircraft to fly straight and level on a compass course and greatly reducing a pilot’s workload. For more than a century, autopilots have improved many aspects of aviation safety, but they have also created new problems.

8 mins read
February/ March 2021

Filling an Empty Space and Enhancing a Cabochon

I often look for a special feature within a slab when choosing the shape to cut into a cab.

2 mins read
Rock&Gem Magazine
January 2021


Gluten-Free Apple Pie

10+ mins read
Delight Gluten Free
October 2020


China launched an ambitious mission on Tuesday to bring back rocks and debris from the moon’s surface for the first time in more than 40 years — an undertaking that could boost human understanding of the moon and of the solar system more generally.

4 mins read
AppleMagazine #474

Andover Audio Spinbase: All-in-one speaker system for your turntable

A great-sounding, compact, vibration-free solution for vinyl lovers.

6 mins read
November 2020


Head-to-toe remake before her birthday

2 mins read
October 26, 2020

Yoga Nidra for Releasing Grief


4 mins read
Yoga Journal
September - October 2020


Go Seafood or Go Home

2 mins read
Apollo Male Models
Summer 2020 Yvan Cournoyer


The very name of the American Standardbred reflects the performance requirement established at the inception of the breed. Here’s how genetics, conformation and training came together to create horses that could trot a mile in 2:30 or less, or pace it in 2:00 flat.

8 mins read
Autumn 2020