Mending Fences
Model Engineers' Workshop|March 2017

John Crammond adds a robust upgrade to a woodworking planer

Mending Fences

I’m sure that all of us whose efforts are mainly concerned with metal, will at some time or another have been dragged kicking and screaming into doing a bit of woodwork. It may be for making a box or cabinet to house some tooling, or a repair job inside the home, I’m afraid that it’s a skill that does not come easily to me. So it was when I got fed up trying to get square edges that I decided to get one of those ubiquitous planer thicknessers to solve my problems.

There are dozens of them, all very similar and I suspect all coming from far off places. I chose a mid range model having viewed a couple of U tube videos and was aware of the faults that I would encounter, most of which involved the fence. The machine duly arrived and I was delighted with its appearance, one problem that others have had with the infeed and outfeed tables being out of line did not exist on mine as they were perfect. However, as I expected the fence was flimsy and would bend at the slightest pressure. One other problem with the fence was that it could not be extended across the tables, a consequence of that being that the cutter blades would always wear more quickly on the fence side and would eventually produce uneven results.

I decided to solve both these problems by producing a fence of substantial proportions with an arrangement that would enable it to be positioned anywhere up to half way across the table’s width, photo 1. My idea consists of a baseplate semi-permanently attached to the machine by existing screws and fixings, on top of which would be a sub base with hinged fence able to be moved and clamped where desired. I resolved not to drill any holes or make any alteration to the planer in any way as this would undoubtedly invalidate its guarantee.

This story is from the March 2017 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the March 2017 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM MODEL ENGINEERS' WORKSHOPView All
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 mins  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 mins  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 mins  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 mins  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 mins  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 mins  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 mins  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 mins  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 mins  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 mins  |
March 2020