An Emergency Repair
Model Engineers' Workshop|May 2017

After a nasty lathe crash Howard Lewis had to put a few things right.

An Emergency Repair
Whilst turning down an MT3 blank arbor, foolishly, I paid more attention to the cutting tool than to the position of the saddle. Everything came to an abrupt halt, when the saddle collided with the headstock. Despite disengaging all the power feed levers, the saddle was almost immovable. Obviously, I had a major problem.

Looking behind the apron, it was clear that the pinion that engaged the rack was badly bent. What follows is what damage had been done, and the actions involved in recovering from this disaster.

Having to strip down something of which I had no knowledge was very daunting. Help came from a poster on the model engineer forum, called Geoff, who, it turned out lived in the next county. Very kindly, he sent me detailed instructions on how to remove the apron and investigate the damage. My lathe is an Engineers Toolroom BL12/24, which is a cousin to the Warco BH600 and the Chester Craftsman, so some of what follows may be applicable to those machines.

When I contacted one of the importers, it became clear that my misfortune was by no means an isolated case and spares were available from stock.

However, having concerns over the strength of the material originally used in my machine, I considered making parts to effect a repair. This would certainly involve purchasing a gear cutter and when the damaged parts had been examined, it was decided to use silver steel for the shaft. I felt that a replacement could be made which would be a little stronger, and at about half the cost, excluding my time. I also decided to modify the rack, to try to prevent any further recurrences.

Strip down

These follow, generally, the instructions sent by Geoff, but list my actions, in perhaps more detail. 

If it needs saying, put the parts removed in a safe place, so that they do not become lost or damaged pending reassembly.

This story is from the May 2017 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the May 2017 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM MODEL ENGINEERS' WORKSHOPView All
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 mins  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 mins  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 mins  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 mins  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 mins  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 mins  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 mins  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 mins  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 mins  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 mins  |
March 2020