Lathework For Beginners
Model Engineers' Workshop|December 2019
To conclude this series Neil Wyatt looks at some final advice for those developing their turning skills.
Lathework For Beginners

The Lathework for Beginner’s series is drawing to a close. I hope that new recruits to our marvellous hobby have found it useful and that more experienced readers will have found some useful ideas as we have gone along. In this final instalment, I would like to finish with some more advice of a more general nature that may be useful to new lathe owners who are starting to build up their workshop.

Cutting Fluids

Almost all cutting operations are improved by the use of some sort of cutting fluid. In industry floods of coolant are used which not only lubricates the cut but washes away chips and reduces the cutting temperature, all of which greatly improves tool life and finish at the expense of complexity and the need to keep coolant where you want it. In addition, the coolant (normally ‘suds’ a mixture of emulsified oils and water) can cause both corrosion and even health problems if leftstanding, although more modern formulations tend to be better in these respects. Most, but by no means all, users of smaller machine tools tend to consider flood coolant too much bother.

More usual, is the use of neat cutting oils, generally applied by brush or drip feed. While these do not wash away chips or offer much cooling, they do lubricate and will improve tool life and finish, especially on tougher materials. I’m a user of neat cutting oils, photo 1, and a little goes a long way- half a litre will last most of us at least a year. Use cheap pound-shop paint brushes to apply the oil, and don’t worry if the odd bristle gets chopped off ! I keep a pot of oil with a brush in it at the back of my lathe at all times, photo 2.

This story is from the December 2019 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the December 2019 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM MODEL ENGINEERS' WORKSHOPView All
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 mins  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 mins  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 mins  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 mins  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 mins  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 mins  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 mins  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 mins  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 mins  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 mins  |
March 2020