If it’s time to add more horsepower to your hot rod, and you’ve decided that boost is the best option, you might have pondered whether mechanical supercharging is the right move, or if a turbo-charger that runs off of exhaust heat energy is best. You’ve come to the right place, because in our decades of building project cars, talking to engine builders, and documenting thousands of amazing cars up close, we’ve seen and heard it all.
The answer, however, isn’t a straightforward one, because your own mechanical and fabrication skills and how you intend to use your car will matter in some significant ways. Before we break down the turbo versus blower debate, let’s first examine the options we’re leaving on the table, namely more cubic inches, more rpm, and chemical supercharging, aka nitrous oxide.
Q Other Power-Adder Options
Although adding boost to an existing engine is a time-honored way to add power, it can also be done without an external compressor. The first method here is to add more combustion events within a given time through an increase in engine rpm. An engine at full throttle can put out more power at 7,000 rpm than it can at 6,000 rpm, and if we do the math, we arrive at roughly a 16 percent increase. If instead of increasing the rpm we increase the displacement, we can arrive at the same number. A 350-cubic-inch small-block Chevy—when increased 16 percent in size to 406 cubic inches through a stroker kit—will also theoretically arrive at the same power output. Lastly, if we add 16 percent more oxygen in the form of nitrous oxide, the result will be similar. We’re leaving out a lot of asterisk details here, but we’ll assume you have a working familiarity with internal combustion engines.
This story is from the July 2021 edition of Hot Rod.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the July 2021 edition of Hot Rod.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber? Sign In
Making Connections
Project T-top Coupe: We install a Terminator X Max for big power.
LET IT BREATHE!
Project X’s new ZZ632 big-block needed to breathe, and this do-ityourself stainless exhaust kit was just the ticket to make it happen.
TUNING OPTIMIZED
VARIABLES WITHIN FUEL-INJECTOR CONSTRUCTION CAN LEAD TO POOR ENGINE OPERATION. HERE'S HOW TO TUNE YOUR FUEL INJECTORS.
Re-Flange It!
We check out the fab skills needed to run a flat hood on a 1970 Mustang with a very unique and too-tall engine.
THE TRIBUTE FOR THE WIN
Ron Capps wins the NHRA U.S. Nationals driving a Don Prudhomme-Hot Wheels tribute Funny Car.
So Close
Following a nearly flawless performance, a pít lane penalty kept the C8.R off the top of the podium in the IMSA Sportscar Weekend.
A RADICAL SHIFT
When you're a teenager and the police know you by name, it's not usually because of your volunteer work or class-topping GPA. Not at all. That was especially true for Jeff Kainz when he was behind the wheel of his 1975 Camaro. In the '80s, while cruising his hometown in North Dakota, his buddies with police scanners often heard the police tell one another: \"Kainz is out on Main Street.\"
WILD MASH-UP
Built to long-haul the 2023 HOT ROD Power Tour, this 1984 Monte Carlo’s facade hides a performance secret!
6 TIMER!
Tom Bailey captures his 6th HOT ROD Drag Week Unlimited/Overall title with his Sick Seconds 1.0 Camaro.
JIM MCFARLAND'S INFLUENCE WENT WAY BEYOND HOT ROD MAGAZINE.
Jim McFarland, the multitalented, multifaceted Texan who enjoyed several careers in the automotive performance industry, passed away in October 2023 at the age of 88.