A Dual Action Feed For A Lathe Tailstock
Model Engineers' Workshop|April 2017

Geoff walker describes an improvement for his drummond m that can be adapted to many similar lathes.

Geoff Walker
A Dual Action Feed For A Lathe Tailstock

I am often researching old books and magazines for attachments and accessories which will enhance the performance and increase the versatility of my old pre-war Drummond lathe.

One such popular addition is a lever action tail stock attachment, which for me is generally preferable to the hand wheel feed. I say generally as there occasions when I would prefer to use a hand wheel feed. Unfortunately when a lever action attachment is fitted it usually takes some time to switch over and reinstate the hand wheel feed.

When after some research I discovered a tail stock attachment design which combines both the lever and hand wheel feed I was naturally very interested.

The researched attachment can be seen on a Winfield lathe in photo 1 and in a general arrangement drawing, fig 1. They are the work of the notable technical writer Mr Ian Bradley. His design featured as an article in a war time issue of Model Engineer Magazine, published in August 1941. I acquired a copy of this article, from issue 2103, which includes additional photos, drawings and instructions.

This article is essentially a brief analysis and review of Mr. Bradleys original work and how I adapted his design for use on my lathe. I have followed most of the detail in his design and only made some minor changes to the fulcrum forks (13), the link (11) and some fixings. No drawings are offered other than Mr Bradley’s. My intention is to present enough information through text and photographs to help a home machinist also adapt the idea for use on their lathe.

Diese Geschichte stammt aus der April 2017-Ausgabe von Model Engineers' Workshop.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

Diese Geschichte stammt aus der April 2017-Ausgabe von Model Engineers' Workshop.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

WEITERE ARTIKEL AUS MODEL ENGINEERS' WORKSHOPAlle anzeigen
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 Minuten  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 Minuten  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 Minuten  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 Minuten  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 Minuten  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 Minuten  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 Minuten  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 Minuten  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 Minuten  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 Minuten  |
March 2020