A Pair Of Quick Change Gearboxes
Model Engineers' Workshop|August 2017

John Crammond Recounts Making and Fitting a Pair of Home-made gearboxes

A Pair Of Quick Change Gearboxes

Many years ago, I was struggling through a rather uncertain period and worried that I might have to part with my faithful old Myford Super 7 that I’d bought secondhand in 1970. Presented with the possibility of being lathe-less I decided to make a machine of my own, and over the next few months patterns were made for all the major components and cast in iron at Birchenlee Foundry in Colne Lancs. At that time, this was run by a wonderful gentleman called Mr Slinger who I was horrified to learn some years later had lost his life in a road accident. I’m not sure whether the Foundry is still operating, but I always feel a tinge of saddness that of the thousands that once were the cornerstone of our Industrial Revolution, only a tiny handful still remain.

To cut a long story short the lathe was finished and as the mandrel ran in the time-honoured configuration of large twin opposed Timken rollers at the front and equally robust ball races at the rear, rigidity and hence performance was excellent. Ironically my circumstances improved and the threat of losing my Myford evaporated. My home made lathe continued to perform impressively as a backup machine when I came across an article on Quick change gearboxes, written by Mr Alan Buttolph appearing in the winter 1990/91 MEW. In it he describes the construction of a box predominantly based on the Sparey plans that may possibly still be available from MAP (I believe plans and castings for a development of the Sparey design, the ‘Machin’ gearbox, are available from Hemingway). Like Mr Buttolph I too had considered the Sparey box but had discounted it because of its bulky size. However Alan had persevered and redesigned the whole using 28dp gearing in place of the 20dp ones. This effectively shrunk the dimensions to 6” long by 4.5” wide and high, resulting in a very compact box of similar size to Myford’s own.

Diese Geschichte stammt aus der August 2017-Ausgabe von Model Engineers' Workshop.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

Diese Geschichte stammt aus der August 2017-Ausgabe von Model Engineers' Workshop.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

WEITERE ARTIKEL AUS MODEL ENGINEERS' WORKSHOPAlle anzeigen
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 Minuten  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 Minuten  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 Minuten  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 Minuten  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 Minuten  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 Minuten  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 Minuten  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 Minuten  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 Minuten  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 Minuten  |
March 2020