Environment-friendly medical-grade TPEs
International Plastics News for Asia|August 2021
Thermoplastic elastomers (TPEs), also known as thermoplastic rubbers, combine the inherent benefits of plastic and rubbery materials. The application of TPEs in the medical field has further been stressed amidst the current coronavirus pandemic with global market for TPEs, assessed at $18.9 billion in 2020, expected to reach $24.2 billion by 2026, rising at a CAGR of 5.2% from 2020-2026, according to a report by reportlinker. com. In terms of regional market, the United States remains the biggest market at an estimated $5.1 billion in 2021, accounting for 27.09% of the world market for TPEs. China, the world second-largest economy, is forecast to reach an estimated size of $4.9 billion in the year 2026, with a cAGr of 7.9% through the analysis period. Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at 2.8% and 4.7%, respectively, over the analysis period. Within Europe, Germany is forecast to grow at approximately 3.2% CAGR while rest of European market will reach $5.6 billion by the end 2026, according to the report.
BIANCA ALVAREZ
Environment-friendly medical-grade TPEs

The extruded, recyclable, coloured, moulded and eco-friendly attributes of TPEs make them safe for use in applications such as food packaging and medical sector. Rising demand for bio-based TPEs and the growing use of TPEs in medical industry is also poised to favour market growth.

Sustainable materials that can withstand disinfection

In the area of thermoplastics, Avient corporation has launched three patent-pending grades for the point-of-sale and consumer markets. The new edgetek™ eT8900 cr series consists of semi-crystalline thermoplastic grades formulations that feature outstanding chemical and crack resistance to common consumer disinfectants versus conventional alternative polymers such as Pc/ABS, Pc/PeT, and Pc/PBT.

These materials were developed in response to consumer and industrial market demands for materials that can withstand increased cleaning and disinfecting protocols. Formulations were tested using an adapted ASTM D543 method for environmental stress cracking resistance (EScr). Results showed that these materials provide better chemical resistance and property retention versus conventional Pc blend alternatives after exposure to common consumer disinfectants, including lysol® all-purpose cleaner, Formula 409® heavy duty degreaser, and clorox® disinfectant wipes.

“The pandemic has given rise to more frequent cleaning and disinfecting, and this new normal is fuelling demand for materials that can endure increased chemical exposure without degrading,” said Matthew Mitchell, Director, Global Marketing, Specialty Engineered Materials at Avient. “This is especially true for public, high-touch surfaces that are being wiped or sprayed at increasing rates. These new grades offer application and design engineers a durable solution that reduces disinfectant-related failures, like cracking and crazing, so products and surfaces can last longer and look better.”

Diese Geschichte stammt aus der August 2021-Ausgabe von International Plastics News for Asia.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

Diese Geschichte stammt aus der August 2021-Ausgabe von International Plastics News for Asia.

Starten Sie Ihre 7-tägige kostenlose Testversion von Magzter GOLD, um auf Tausende kuratierte Premium-Storys sowie über 8.000 Zeitschriften und Zeitungen zuzugreifen.

WEITERE ARTIKEL AUS INTERNATIONAL PLASTICS NEWS FOR ASIAAlle anzeigen
Industry innovations aimed towards a greener future
International Plastics News for Asia

Industry innovations aimed towards a greener future

Sustainability and circular economy, energy saving technologies, high-performance materials with enhanced properties, and cost-efficient production processes are expected to dominate the plastics industry in 2022 and beyond.

time-read
10+ Minuten  |
December 2021
Special extrusion lines for bioplastic compounds
International Plastics News for Asia

Special extrusion lines for bioplastic compounds

The biodegradable and compostable plastics sector is growing steadily, and this is partly due to the fact that several measures have been taken, especially in the EU, to cut down on single-use plastics.

time-read
3 Minuten  |
December 2021
Plastics revolutionise medical device production
International Plastics News for Asia

Plastics revolutionise medical device production

The coronavirus pandemic has brought into focus the urgent need for medical supplies – which included medical disposables, medical devices, laboratory equipment, and many others.

time-read
3 Minuten  |
December 2021
Spinning and recycling go together in a single step
International Plastics News for Asia

Spinning and recycling go together in a single step

As a medium-sized German machine construction business, BB Engineering has been manufacturing components and systems for synthetic fibre and film production for more than 20 years.

time-read
5 Minuten  |
December 2021
Advanced high-performance light stabilisers
International Plastics News for Asia

Advanced high-performance light stabilisers

A range of high-performance light stabilisers with enhanced properties are now being made available.

time-read
5 Minuten  |
December 2021
ArabPlast holds successful edition
International Plastics News for Asia

ArabPlast holds successful edition

The 15th Edition of ArabPlast was held on 15-18November 2021 at the Dubai World Trade Centre, Dubai, U.A.E. Spanning over 28 years, ArabPlast is an exclusive event for plastics, petrochemicals, packaging and rubber industry, and serves as an attractive platform where global industry players show off their products to the Middle East market.

time-read
2 Minuten  |
December 2021
Food-grade plastics recycling facility installed in India
International Plastics News for Asia

Food-grade plastics recycling facility installed in India

The well-established Indian recycler commissioned a PET bottle-to-bottle and a post-consumer polyolefin recycling line from Starlinger in mid-September.

time-read
4 Minuten  |
December 2021
How to bring down downtime in manufacturing
International Plastics News for Asia

How to bring down downtime in manufacturing

For most of us, the word downtime conjures images of relaxation.

time-read
4 Minuten  |
December 2021
Optimistic forecast for blow moulded plastics market
International Plastics News for Asia

Optimistic forecast for blow moulded plastics market

Growing demand from key applications is a key factor in the projected growth of the blow moulding sector.

time-read
3 Minuten  |
December 2021
The benefits of dedicated system for mould development
International Plastics News for Asia

The benefits of dedicated system for mould development

When it comes to useful tools that can enhance teamwork efficiency, we usually think of the Product Lifecycle Management (PLM) systems.

time-read
3 Minuten  |
December 2021