Section 336 is the reason why today’s model-aircraft and drone fliers have been able to fly without a Federal Aviation Administration (FAA) pilot’s license, equipage mandates, and regulatory paperwork. Section 336 is a safe tradition that has been around for many decades. If you like flying your model aircraft for recreation without mandates that include pilot licenses and remote IDs, action is needed now.
Who Would Do This?
The efforts to repeal are coming from various sources—to name a few, Google’s Project Wing, CNN, and Ford. All these companies are members of the Commercial Drone Alliance. This group issued a press release on April 4, 2018, stating, “Legislation is necessary now to allow the FAA to properly regulate hobbyist drone operations under a revised Part 107 of the Federal Aviation Regulations.” Lisa Ellman, co-executive director of the Commercial Drone Alliance, says, “We understand why model aircraft proponents want to remain exempt, as they have been flying safely for decades. However, times have changed, and hobbyists are no longer flying alone.” These commercial drone companies apparently wish to repeal Section 336 and replace it with restrictions that include pilot licenses and remote IDs for hobby pilots to free up airspace for large commercial drone operations.
In my experience with model aircraft and drones, I have found many people in STEM (Science, Technology, Engineering, and Math) and careers in aviation started out as Section 336 recreational fliers of model aircraft. In addition, many of these same professionals continue to fly their model aircraft as an enjoyable hobby.
This story is from the October 2018 edition of Model Airplane News.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the October 2018 edition of Model Airplane News.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber? Sign In
Old School Model Works Fifty Six
The Fifty Six takes its design cues from the original .09- to .15-size Carl Goldberg Falcon 56 of the 1960s. Reworked to incorporate modern, lasercut techniques to make kit building better than ever.
FLYING TWINS Multi-engine warbirds made easy
Let’s face it, there’s just something extra special about twin-engine RC aircraft. Most modelers stop what they’re doing when a twin fires up on the flightline.
SPIRIT OF RHINEBECK AWARD WINNER
A close up of Norman Malinowski’s 1/3-scale Albatros
CENTER OF GRAVITY BASICS
The secret to a plane that flies well
DON'T TRASH THAT CRASH!
Pro tips for light, strong aircraft repairs
TAKEOFF WITH A 1 1/2 POSITIVE SNAP ROLL
If you’re aspiring to become a better aerobatic pilot, you are, no doubt, constantly searching to add exciting maneuvers to your flight routine.
THE 'RAIDER REPAINT
Painting and weathering the Legend Hobby A-1 Skyraider
THE COMPETITION CONTINUES
Every spring, Frank Tiano’s Top Gun Scale Invitational has heralded the beginning of the flying season, offering builders an opportunity to show off their projects in Lakeland, Florida after a winter spent finishing them in their workshops.
BUILDING BENCH & WORKSHOP TIPS
I have built countless RC models, from kits, plans and even my own scratch designs.
TOP GUN FAVORITE MARK CHAPMAN'S 1/3-SCALE ALBATROS D.VA
When I told Model Airplane News executive editor Debra Cleghorn that I was attending the Top Gun Scale Invitational for the first time, she asked me if I would interview the pilot of one of my favorite planes at the event. As a WW I fan (and a Balsa USA builder), I chose Mark Chapman’s beautifully detailed 1/3-scale Balsa USA Albatros D.Va, flown by Marvin Alvarez in Team Scale.