Meet The President
Cranes & Access|April/May 2020
Skyjack appointed Ken McDougall as president last September. With more than six months under his belt he spoke with Mark Darwin at Conexpo in mid March.
Ken McDougall
Meet The President

The news that McDougall was to be re-appointed as Skyjack president was totally unexpected and sudden. Much had changed since he left the company at the end of 2009, when he was seconded overnight to head up Linamar’s Mexican powertrain operations.

Skyjack appointed Steve Shaughnessy in his place, having just quit as managing director of Loxam UK. Within 15 months Shaughnessy was replaced by Linamar’s Ken Meyers who was in the role for less than six months. He was replaced by Brad Boehler - whom McDougall had promoted to head of engineering during his time as president - who provided the much-needed stability to the role…. that is until the surprise McDougall announcement. Under Boehler the company had grown beyond all recognition becoming the leading scissor lift manufacturer, establishing itself in the global boom lift market and gaining a good foothold in the North American telehandler market.

McDougall first joined Skyjack from Linamar in 2008 taking over from Lloyd Spalding following his delayed retirement. “During the early part of the 2008 recession, activity in the access market was very slow and I spent the latter part of 2008 and 2009 exploring new markets to sell equipment,” says McDougall. “Because it was slow I asked Linamar if I could ‘pitch in’ on the automotive side. I did not think it would come to anything but the operations in Mexico that I was familiar with were starting to struggle as the automotive market picked up. I was asked to help and spent 18 months running four manufacturing plants there, and then slowly took over all the automotive plants in Canada, the USA and Mexico - 28 in all - but I always said that if the opportunity ever presented itself I would love to go back to Skyjack.”

This story is from the April/May 2020 edition of Cranes & Access.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the April/May 2020 edition of Cranes & Access.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM CRANES & ACCESSView All
The Changing Face Of The Scissor Lift Market
Cranes & Access

The Changing Face Of The Scissor Lift Market

The majority of self-propelled scissor lifts have been electric powered since the market began to take off in the late 1970s, gathering pace in the mid 1980s. With almost 90 percent of all scissor lifts already battery powered we take a look at the remaining 10 to 15 percent of the market that remains diesel powered – mostly full size Rough Terrain models. This, along with a look at some of the latest new product launches in the rest of the scissor lift market.

time-read
10+ mins  |
December/January 2021
Wind safety developments
Cranes & Access

Wind safety developments

A serious wind farm accident in 2008 led to a decade long process of safety improvements in the sector and offers a casebook example of how to build an understanding of safety between all those involved. Will North spoke to two of those leading the efforts, Klaus Meissner and Ton Klijn, who explain the resources available to ensure safe lifting on wind farms.

time-read
9 mins  |
December/January 2021
Rising winds
Cranes & Access

Rising winds

As a new generation of larger, higher, wind turbines become commonplace around the world, wind farm developers will need to look at employing larger lattice and telescopic crawler cranes to install them. Will north reports.

time-read
10+ mins  |
December/January 2021
Edilgru MH 1000-30/32
Cranes & Access

Edilgru MH 1000-30/32

Edilgru is an Italian manufacturer of self-erecting tower cranes. CGM Models of Italy has produced this 1:50 scale model which is substantially made of high-quality plastic, rather than being diecast. It comes in an Edilgru branded box, but there are no instructions included, which is a pity as they would be helpful.

time-read
1 min  |
December/January 2021
Bringing Battersea Back To Life
Cranes & Access

Bringing Battersea Back To Life

London’s iconic art deco style coal-fired Battersea Power Station was constructed in various stages between 1929 and the mid-1950s. By 1983 however the entire site was decommissioned to be left empty and decaying on the south bank of the River Thames until 2013 when work was approved to begin a long-term restoration and transformation project set to cost £9 billion.

time-read
4 mins  |
November 2020
The higher hundreds
Cranes & Access

The higher hundreds

In the second of a two-part report, Will North looks at All Terrain cranes between 130 and 180 tonnes. While some models in this class target taxi crane work, it also marks the point where five-axle carriers become standard with most models designed for project work.

time-read
7 mins  |
November 2020
Spiders gaining traction
Cranes & Access

Spiders gaining traction

The results from our survey of the tree care sector in last month’s issue of cranes & Access highlighted how spider lifts are the platform of choice for arborists. In the following pages we take a look at the latest spider lift products and features on the market to see why they are proving so popular. We also speak with CMC's UK distributor Tracked Spider Sales and UK rental company Spiderlift.

time-read
10+ mins  |
November 2020
Unconventional power
Cranes & Access

Unconventional power

Conventional fuels may be the energy source of yesterday, and renewables the innovation of the present, but tomorrow’s fuel could well be fusion power. The name of ITeR, originally the International Thermonuclear Experimental Reactor, puns on the latin ‘The Way'. The project is supported by the european union, India, Japan, Korea, Russia and the united States. The global joint venture partners clearly believe fusion power is the way forward.

time-read
2 mins  |
November 2020
XCMG XGC220T
Cranes & Access

XCMG XGC220T

The XCMG XGC220T is a telescopic crawler crane with a capacity of 220 tonnes. This model by Yagao comes in an XCMG branded box and includes an instruction sheet printed in Chinese and English.

time-read
1 min  |
November 2020
Luke Reddish - CPA Lifting Technician of the Year
Cranes & Access

Luke Reddish - CPA Lifting Technician of the Year

This year’s CPA Stars of the Future ‘Lifting Technician of the Year’ award was won by Luke Reddish, 28, of Wolffkran - one of the first crane companies to adopt the new Lifting Technician Trailblazer Apprenticeship. Wolffkran’s Samuel Slocombe was also highly commended.

time-read
3 mins  |
November 2020