Sail|August 2017
Article Reader

How to deal with snatch loads in an anchorage

If you anchor o ft en enough a time will occur when your yacht is brought up abruptly against the hold of your chain and anchor. Initially it might be a gentle bump, but as the wind increases it can become quite aggressive and frightening. It’s not only wind that causes this snatch loading. As the wind increases so does the wave action, especially in ocean anchorages with a bit of fetch. You only need a gust coinciding with a peak wave and swell, and you have a classic anchor dragging situation.

Historically, the easiest solution was to deploy more chain, move to a more sheltered location—if you could find one—or rig a riding sail, which reduces veering.

Yet another option is to equip your boat in advance with heavier chain. However, while heavier chain is advantageous (up to a point), if you upgrade your chain you will also need a new gypsy, and as soon as you discover how much that costs, added to the cost of the new chain, your enthusiasm may well be tempered. Moreover, upgrading from, say, 300 ft of 5/16in chain to 300 ft of 3/8in chain will add an additional 220lb in your bow locker, which may be good for catenary, but will most definitely not be good for windward sailing performance, especially if you have a modern lightweight yacht.

Beyond that, with larger chain you might need a more powerful windlass, which in turn will need more power in the form of a larger battery bank and heavier power cables (all which will cost more money). If your chain locker is shallow, more and heavier chain will also takes up more room and “towering” I will occur with increased frequency, as piles of heavier chain are more difficult to topple.

articleRead

You can read up to 3 premium stories before you subscribe to Magzter GOLD

Log in, if you are already a subscriber

GoldLogo

Get unlimited access to thousands of curated premium stories, newspapers and 5,000+ magazines

READ THE ENTIRE ISSUE

August 2017