A Ring Light For The Super X1 Mill
Model Engineers' Workshop|November 2019
Michael Cox creates shadow-free illumination on his mill.
A Ring Light For The Super X1 Mill

Good lighting is essential when working with machine tools. The problem with most conventional machine lights is that they are very directional and whilst one side is well lit the other side is in deep shadow. This problem can be alleviated by having two lights shining from two opposing directions. The other problem with conventional machine lights is that they tend to restrict the operators view by physically being in the way.

In recent years LED ring lights, photo 1, also known as “Angel Eyes”, have become available in a range of sizes. These are popular with car enthusiasts as enhancements to the standard vehicle lights. They are usually rated for 12-volt power supplies, come in sizes from 40mm diameter up to at least 160mm diameter, and come in every colour of the rainbow. There are many suppliers of such ring lights on eBay. Potentially these ring lights can provide all-round lighting for the mill spindle.

I bought two 80mm ring lights to experiment with on the mill. These had 24 white LEDs mounted around the ring.

First version

This story is from the November 2019 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the November 2019 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM MODEL ENGINEERS' WORKSHOPView All
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 mins  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 mins  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 mins  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 mins  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 mins  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 mins  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 mins  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 mins  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 mins  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 mins  |
March 2020