Clamping
Model Engineers' Workshop|February 2018

Ian Priest gives some thought to this important topic and its consequences.

Clamping

Some time ago I read with interest a debate on the Model Engineers’ Workshop forum regarding the various methods employed to clamp jobs or pieces of equipment to machine tables be they milling, lathe, shaping or any other.

In particular one contributor asked the greater audience to consider how to avoid sections of a ‘Tee’ slotted machine bed from breaking when clamping down. This is not an uncommon issue, in the past I’ve seen articles on how model engineers have made good, broken sections of machine tables. Indeed, in industry there are companies whose sole business is the repair of similar disasters. Therefore, as model engineers we are not alone, much better however to avoid the situation in the first place.

I would perhaps suggest the following as a more suitable way of securing our various bits and bobs to our precious machine tables. However, before we do that the requirements of any clamping solution needs to be considered.

Considerations

Be strong and robust enough to perform the required task. This sounds pretty much a given but the clamping solution needs to be ‘only just strong enough’ and not so big and powerful that any judicious over tightening is injurious to the machine.

Be safe, again a given but although we want our clamping system to be up to the job of securing items to a machine table we don’t want it to be so powerful that the inexperienced can easily over do it causing damage to the machine. We need a failsafe mechanism incorporated into the clamping system.

Be flexible, not in terms of use, in that sense we need it to be as rigid as possible, but insomuch that it easily lends itself to a variety of applications. I find it very frustrating at times not to have at hand just what I need to bolt something down.

This story is from the February 2018 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the February 2018 edition of Model Engineers' Workshop.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM MODEL ENGINEERS' WORKSHOPView All
Readers' Workshops - Patrick Cubbon
Model Engineers' Workshop

Readers' Workshops - Patrick Cubbon

Patrick Cubbon describes his workshops – a portable one from 1963 and the current accommodation

time-read
2 mins  |
May 2020
Desktop Gear Hobbing
Model Engineers' Workshop

Desktop Gear Hobbing

Toby Kinsey has designed this fascinating piece of gearmaking equipment

time-read
9 mins  |
May 2020
The John Stevenson Trophy 2020
Model Engineers' Workshop

The John Stevenson Trophy 2020

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

time-read
3 mins  |
May 2020
From the Archives: Twist drill Sharpening by the Four Facet Method
Model Engineers' Workshop

From the Archives: Twist drill Sharpening by the Four Facet Method

Giles Parkes, MEW Issue 64, February/March 2000

time-read
4 mins  |
May 2020
Dividing on the Warco 220 Lathe
Model Engineers' Workshop

Dividing on the Warco 220 Lathe

Peter Shaw describes a mandrel dividing attachment for this popular lathe that can be adapted to fit many other benchtop machines

time-read
8 mins  |
May 2020
Choosing Steels
Model Engineers' Workshop

Choosing Steels

Stub Mandrel offers some advice on choosing the right steel for the job

time-read
7 mins  |
May 2020
A Storage Story
Model Engineers' Workshop

A Storage Story

Robin King shares the lessons learned from his experience of workshop moves

time-read
8 mins  |
May 2020
A Simple Drill Grinding Aid
Model Engineers' Workshop

A Simple Drill Grinding Aid

A newcomer to our hobby was having trouble sharpening drills, so Howard Lewis made a simple aid for him

time-read
2 mins  |
May 2020
Yet Another Bodge-Up!
Model Engineers' Workshop

Yet Another Bodge-Up!

Peter Shaw finds a use for some aged homebrew slot drills.

time-read
5 mins  |
March 2020
Workshop Press Tooling Part 2
Model Engineers' Workshop

Workshop Press Tooling Part 2

Will Doggett makes a set of tooling for his press tool described starting in issue 285

time-read
5 mins  |
March 2020