Wind In The Winches: Towing Up The Mighty Columbia
Professional Mariner|December / January 2020
It was a busy March day aboard Tidewater Transportation’s Captain Bob, catchup time due to annual lock closures by the U.S. Army Corps of Engineers on the Columbia and Snake rivers.
Brian Gauvin
Wind In The Winches: Towing Up The Mighty Columbia

The locks, closed one month for maintenance, had reopened two days earlier on the Columbia, and crews were scurrying to make up tows as barge traffic resumed upriver to the Tri-Cities of Richland, Kennewick, and Pasco. The Snake River, navigable for commercial cargo to Lewiston, Idaho, opened the following week.

The Tidewater yard sits at mile marker 102 on the north bank of the Columbia at Vancouver, Wash. For Captain Bob’s deck crew, it was tough work making up the tow there, schlepping, coiling and cinching up heavy wire cable with hand-operated winches.

Kevin Maki, the deckhand on the after watch, appreciated the help from other deck crews in the fleet to prepare the tow for a mid-afternoon departure. He remarked that the tow — made up of two empty grain barges at the bow followed by two chip barges, one empty, the other loaded — was an oddball one.

With the tow assembled, the pilot, Phil Morgan, eased Captain Bob into the channel and began the push to Pasco, Wash., at mile marker 329. After making the Burlington Northern Railroad Bridge, the steel I-5 span joining Vancouver and Portland, Ore., and the modern concrete I-205 bypass bridge, the tow was clear of the two cities.

The 110-by-34-foot, 5,000- hp Captain Bob, the most powerful tug in the Tidewater fleet, is powered by two Caterpillar 3516 mains coupled to Reintjes reduction gears turning 108-by-84-inch, outward turning open propellers. That power would be needed to buck the river’s strong spring current, which was being fed by freshets of snowmelt. Mount Hood, sparkling white and dead ahead, portended more of the same. Then there was the unrelenting wind, cutting through the mountains and buffeting the tow.

This story is from the December / January 2020 edition of Professional Mariner.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the December / January 2020 edition of Professional Mariner.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM PROFESSIONAL MARINERView All
Mariner's role still unknown as autonomous shipping gains speed
Professional Mariner

Mariner's role still unknown as autonomous shipping gains speed

Mariners’ role still unknown as autonomous shipping gains speed

time-read
6 mins  |
December - January2021
Piracy edges closer to home with wave of raids in southern Gulf
Professional Mariner

Piracy edges closer to home with wave of raids in southern Gulf

In the brief cellphone video recorded by a crewmember on the offshore supply vessel (OSV) Remas, the pirates walk back and forth on the deck of the ship, clenching their guns and using them to point as they order around the crew. Their faces are draped in clothing and bandanas.

time-read
4 mins  |
December - January2021
Casualties
Professional Mariner

Casualties

NTSB: Dredge hit Texas gas pipeline, causing fire that killed four

time-read
4 mins  |
December - January2021
IMO emissions report raises new concerns about methane slip
Professional Mariner

IMO emissions report raises new concerns about methane slip

A recent report from the International Maritime Organization (IMO) reveals that global shipping emissions increased nearly 10 percent from 2012 to 2018, with the industry facing a growing challenge concerning methane slip.

time-read
3 mins  |
December - January2021
Bay State brothers find industry niche by making old into new
Professional Mariner

Bay State brothers find industry niche by making old into new

Zero non-conformities is what you want to hear when the U.S. Coast Guard inspects your tugboat. Once you’ve prepared your vessel, the inspectors come aboard to peruse your paperwork. They ask you pointed questions, to which they expect straightforward answers. Perusal completed, they then scrutinize all of the related safety systems, from bilge to antennas — even the ship’s bell.

time-read
5 mins  |
December - January2021
Signals
Professional Mariner

Signals

A year into the pandemic, thousands ‘essentially indentured’ on ships

time-read
3 mins  |
December - January2021
Analysis points to faulty loading, low ballast in Golden Ray rollover
Professional Mariner

Analysis points to faulty loading, low ballast in Golden Ray rollover

While the salvage of the sunken vehicle carrier Golden Ray has been delayed for months due to COVID-19 and the hurricane season, analysis by the U.S. Coast Guard has determined a possible cause for the rollover: a combination of vehicles placed too high on the ship’s decks, and not enough ballast water gave the placement of the cargo.

time-read
2 mins  |
December - January2021
Seastreak newcomer pushing through dip in demand
Professional Mariner

Seastreak newcomer pushing through dip in demand

Two years ago, Seastreak LLC took delivery of Seastreak Commodore, a 600-passenger fast ferry, from Gulf Craft of Franklin, La. Designed by Australia-based Incat Crowther, the vessel is the largest of its kind in the United States and was built to meet the burgeoning demand for service in the New York-New Jersey market.

time-read
2 mins  |
December - January2021
New year in a new world: Navigating COVID's maritime realities
Professional Mariner

New year in a new world: Navigating COVID's maritime realities

In a matter of days, the decorative time balls will drop, “Auld Lang Syne” will fill the air, and ships at anchor will sound their horns as the world welcomes in the new year.

time-read
4 mins  |
December - January2021
Advanced props, rudders provide new efficiencies below the waterline
Professional Mariner

Advanced props, rudders provide new efficiencies below the waterline

It took a decade or two from the invention of the marine propeller in the 19th century for the technology to become widely accepted. Thereafter, adoption has been nearly universal, but progress toward improved efficiencies has come in fits and starts.

time-read
5 mins  |
December - January2021