Shake down
Racecar Engineering|Design of a Racecar
From K&C to seven-post, there’s a wide range of test rigs now available for checking, testing and developing motorsport suspension systems. Here’s Racecar’s guide to all you need to know about these extraordinary machines
JAHEE CAMPBELL-BRENNAN
Shake down
The role of a racecar’s suspension is a complex one, and includes control of wheel orientation, deflection, how accelerations are transmitted into the vehicle body and also the effectiveness of the overall aerodynamic package.

Usually, open-wheelers, prototypes and GT racers utilise a double wishbone arrangement, whereas saloon, touring and WRC-style cars often run a MacPherson strut at the front axle.

Compliance and flex

Double wishbone systems often have chassis-mounted spring-damper units, which must include a linkage to enable their actuation. This additional structural member is known as a pushrod (loaded in compression in bump travel) or pull rod (loaded in tension in bump travel). The pushrod/pull rod actuates a component known as a bell crank, which pivots around a fulcrum to exert a force on the damper. Running through the load path from the wheel upright to the damper in this inboard arrangement there is an array of bearings, fasteners and joints the force must journey through. These components help designers to tune the inherent compliance and flex of such a system and its influence on the kinematics.

This story is from the Design of a Racecar edition of Racecar Engineering.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the Design of a Racecar edition of Racecar Engineering.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM RACECAR ENGINEERINGView All
Racecar Engineering

Talk the torque

More thoughts on in-wheel motors and their effects on twisting force

time-read
6 mins  |
December 2021
Racecar Engineering

Rolling about

An explanation of the limitations of a previous load transfer article, bringing jacking forces into the mix

time-read
5 mins  |
December 2021
Racecar Engineering

F1 breaks schedule records

The FIA has confirmed no fewer than 23 races on the 2022 Formula 1 World Championship schedule, the highest number of grands prix ever to be held in a single season, and that has led to criticism from some teams that will be on the road for eight months.

time-read
1 min  |
December 2021
Under pressure
Racecar Engineering

Under pressure

Toyota may have finished first and second at Le Mans this year, but the effort required to overcome a fuel delivery problem and finish with both cars was Herculean

time-read
10+ mins  |
December 2021
Racecar Engineering

Physics at work

Dutch company, Intrax, offers Racecar Engineering an insight into the technologies it employs to optimise its suspension products

time-read
4 mins  |
December 2021
Racecar Engineering

Williams' 2030 ambition

Williams Racing has committed to becoming climate positive by 2030 as part of an all-new sustainability strategy.

time-read
1 min  |
December 2021
Racecar Engineering

Diff'rent strokes

Racecar looks at the different types of mechanical differential, their benefits and limitations

time-read
10+ mins  |
December 2021
Racecar Engineering

Das Boot

A curious Twitter exchange fired up a unique, hydrogen-powered, cross-country project that will contest the Baja 1000 in November 2022

time-read
8 mins  |
December 2021
Air born
Racecar Engineering

Air born

Every racecar engineer's dream is a blank sheet of paper design. When Hoonigan and Subaru approached Vermont Sportscars about building the next generation of Gymkhana racer, that's just what the company was given

time-read
8 mins  |
December 2021
Remote control
Racecar Engineering

Remote control

Called variously ‘virtual garages’, ‘mission control’ or ‘race support rooms’ is the future of race engineering sitting in the warm back at HQ?

time-read
10+ mins  |
December 2021