I was looking at the pic of the DSR racer in your column in the February 2020 issue of Racecar Engineering and one thing about it struck me – they were using a cog belt drive. Cog belt drives are seven to 10 per cent more efficient than a chain drive, so at first this appears to be a pretty good way to improve power without adding engine stress.
However, when I contacted Gates Application Engineering with my specifications for the small lakester my son and I race at Bonneville that uses a motorcycle engine with chain drive, they recommended a belt tension of over 700lbs to ensure it stays engaged!
That level of tension almost surely requires some sort of swing arm suspension be used at least on the drive side of the engine, as seen in the photo of the DSR suspension, or some way that ensures the belt is maintained under constant tension (and alignment) regardless of suspension travel.
I think the belt drive is probably the main reason the illustrated DSR is using trailing arm suspension and not a more sophisticated suspension design.
The thing I was concerned about with using, say, a pair of equal length trailing links is their length has to be exactly the same length as the belt pulley centres as even a slight difference could change the belt tension considerably. A very substantial idler pulley would be an absolute requirement to compensate for any possible change due to suspension travel, and also some sort of lateral location control to keep the pulleys vertically in line to keep the belt flat across them.
THE CONSULTANT
This story is from the September 2020 edition of Racecar Engineering.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the September 2020 edition of Racecar Engineering.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber? Sign In
Talk the torque
More thoughts on in-wheel motors and their effects on twisting force
Rolling about
An explanation of the limitations of a previous load transfer article, bringing jacking forces into the mix
F1 breaks schedule records
The FIA has confirmed no fewer than 23 races on the 2022 Formula 1 World Championship schedule, the highest number of grands prix ever to be held in a single season, and that has led to criticism from some teams that will be on the road for eight months.
Under pressure
Toyota may have finished first and second at Le Mans this year, but the effort required to overcome a fuel delivery problem and finish with both cars was Herculean
Physics at work
Dutch company, Intrax, offers Racecar Engineering an insight into the technologies it employs to optimise its suspension products
Williams' 2030 ambition
Williams Racing has committed to becoming climate positive by 2030 as part of an all-new sustainability strategy.
Diff'rent strokes
Racecar looks at the different types of mechanical differential, their benefits and limitations
Das Boot
A curious Twitter exchange fired up a unique, hydrogen-powered, cross-country project that will contest the Baja 1000 in November 2022
Air born
Every racecar engineer's dream is a blank sheet of paper design. When Hoonigan and Subaru approached Vermont Sportscars about building the next generation of Gymkhana racer, that's just what the company was given
Remote control
Called variously ‘virtual garages’, ‘mission control’ or ‘race support rooms’ is the future of race engineering sitting in the warm back at HQ?
