Q: I have a 1969 Corvette with a 300hp 350 engine. The engine was rebuilt several years ago with just enough bore to clean up the cylinders. It has the stock cam, stock heads with stainless steel valves, and a stock Rochester Quadrajet carburetor. It runs a 160-degree thermostat, a new heavy-duty water pump, and a nearly-new fan clutch.
When the engine temp nears 200 degrees Fahrenheit in heavy traffic, it starts missing and will shut down if I do not get off the road to let it cool down. It seems as if it’s experiencing vapor lock or the fuel is boiling out of the carburetor. In an attempt to isolate it from engine heat, the carburetor has three gaskets under it: fiber on the intake, a thick stainless steel plate, and another fiber gasket between the stainless and carburetor.
I went through the diagnosis steps in your recent engine vacuum troubleshooting article (“Your Vacuum Gauge is Your Friend,” Aug. ’19) and could not find an issue. I measured idle vacuum at just over 18 in-Hg and 22 in-Hg at about 1,500-2,000 rpm. I am at a loss as to where to go and what to do next. Can you please help with some ideas as to what will correct this issue?
A: You need to run any diagnostics checks when the engine is at 200 degrees and compare the results to near-ambient checks. Don’t wait for the problem to occur on the highway; try to duplicate the problem close to home or in your driveway. While the vacuum looks good under normal conditions, what is it when you’re having the problem?
This story is from the February 2020 edition of Hot Rod.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the February 2020 edition of Hot Rod.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber? Sign In
Making Connections
Project T-top Coupe: We install a Terminator X Max for big power.
LET IT BREATHE!
Project X’s new ZZ632 big-block needed to breathe, and this do-ityourself stainless exhaust kit was just the ticket to make it happen.
TUNING OPTIMIZED
VARIABLES WITHIN FUEL-INJECTOR CONSTRUCTION CAN LEAD TO POOR ENGINE OPERATION. HERE'S HOW TO TUNE YOUR FUEL INJECTORS.
Re-Flange It!
We check out the fab skills needed to run a flat hood on a 1970 Mustang with a very unique and too-tall engine.
THE TRIBUTE FOR THE WIN
Ron Capps wins the NHRA U.S. Nationals driving a Don Prudhomme-Hot Wheels tribute Funny Car.
So Close
Following a nearly flawless performance, a pít lane penalty kept the C8.R off the top of the podium in the IMSA Sportscar Weekend.
A RADICAL SHIFT
When you're a teenager and the police know you by name, it's not usually because of your volunteer work or class-topping GPA. Not at all. That was especially true for Jeff Kainz when he was behind the wheel of his 1975 Camaro. In the '80s, while cruising his hometown in North Dakota, his buddies with police scanners often heard the police tell one another: \"Kainz is out on Main Street.\"
WILD MASH-UP
Built to long-haul the 2023 HOT ROD Power Tour, this 1984 Monte Carlo’s facade hides a performance secret!
6 TIMER!
Tom Bailey captures his 6th HOT ROD Drag Week Unlimited/Overall title with his Sick Seconds 1.0 Camaro.
JIM MCFARLAND'S INFLUENCE WENT WAY BEYOND HOT ROD MAGAZINE.
Jim McFarland, the multitalented, multifaceted Texan who enjoyed several careers in the automotive performance industry, passed away in October 2023 at the age of 88.