Yamaha YZF-R1 5VY part 4 How 8 goes into 1!
Classic Motorcycle Mechanics|April 2020
Poor PB is rueing his choice of track-day steed – but with some patience and research he may just have tracked down some rare parts…
PAUL BERRYMAN
Yamaha YZF-R1 5VY part 4 How 8 goes into 1!

A quick recap of thisR1’s story so far would be; browse, buy, seize, strip and oh bugger!

The crankshaft and rods were now junk. Claimed by the destructive cocktail of abandoned clutch plates and flywheel magnets circulating amongst the oil, replacement parts to rebuild the motor were needed.

As the owner of a 2004-2008 R1, shopping for used engine parts you’ll soon find you’re fighting over scraps, each burdened with the age-old ‘supply and demand’ premium. The detaching flywheel magnet issue on this generation of R1 ensures significant demand for both whole engines and major internal components too. Crankcases are common, and cheap, the important stuff that goes inside though? Not so much! That tells you all you need to know; as you’d expect for a 15-year-old sportsbike, plenty of these engines have made it on to the secondhand market, but the vulnerable bits (cranks, rods, gearboxes, flywheels) have already been snapped up. Damn.

After enough internet searches to drive me slightly mad, but only coming up with motors that had ridiculous £1500 price tags, unknown provenance or scrap-ready parts that had been scraped out of already blown engines, it was time for lateral thought. The good news is I like finding workarounds to problems – I’m almost indefatigable when it comes to proving I’m a smart arse (you don’t say, PB? – Bertie.) The task in hand was to find a crankshaft, connecting rods and as many other 5VY compatible engine parts as possible to make the required rebuild happen.

This story is from the April 2020 edition of Classic Motorcycle Mechanics.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the April 2020 edition of Classic Motorcycle Mechanics.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM CLASSIC MOTORCYCLE MECHANICSView All
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021