Show time!
Classic Motorcycle Mechanics|January 2020
He’s been a busy bee, has our Allen, guest at three shows, he also continues his account of his SS100.
ALLEN MILLYARD
Show time!

This October has been a busy time, attending three shows in succession starting with the Copdock Motorcycle Show in Ipswich, where I took three of my bikes to start-up and demonstrate. I was also Guest of Honour, which involved interviews and presenting the awards to winners of the best bikes in show.

This was followed by the CMM/Carole Nash show at Stafford.I was taking seven bikes, so the week before I needed to ride each bike to make sure they all ran perfectly for the live starts. I like to do a 10-mile loop to clear the exhausts on the two-strokes and warm the oil on the four-strokes, with the exception of the 5.0L Flying Millyard, which takes a bit more riding to fully warm the six litres of oil in its remote oil tank. I was also Guest

Honour at Stafford, which was a eat privilege, and being interviewed several times on stage with Steve later and John McCrink was great fun. he last event was the National Motorcycle Museum live day. I took three bikes to display in the conference room with the RC374 on stage. The day was fast-moving with two presentations on stage with Henry Cole, Sam Lovegrove and John McGuinness, compèred by Steve Plater. For me, starting my RC374 in front of around 1200 people was an amazing experience; I think even hose standing right at the back could hear it quite clearly. I really enjoyed meeting and talking to so many show visitors, putting faces to social media friends and followers, catching up with friends and making new acquaintances.

This story is from the January 2020 edition of Classic Motorcycle Mechanics.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

This story is from the January 2020 edition of Classic Motorcycle Mechanics.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.

MORE STORIES FROM CLASSIC MOTORCYCLE MECHANICSView All
Classic Motorcycle Mechanics

Honda VFR750R - RC30

If there’s a more worshipped V4 out there, we’ve yet to see it: welcome to our reboot of the awesome VFR750R RC30…

time-read
2 mins  |
September 2021
Mountain tension!
Classic Motorcycle Mechanics

Mountain tension!

Award-winning motorcycle engineer!

time-read
5 mins  |
September 2021
Fazer set to STUN!
Classic Motorcycle Mechanics

Fazer set to STUN!

What do you get when you mix CRK’s lovely café racer kit to Yamaha’s budget middleweight and the recently-retired Martin Fox? Well, one helluva foxy Fazer!

time-read
6 mins  |
September 2021
Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!
Classic Motorcycle Mechanics

Project Suzuki 1984 RG250 part 4 BRUNO BARES ALL!

This month, while we wait for backorder engine parts, we strip the chassis back to the bare frame, assess what is needed and plan the reassembly…

time-read
6 mins  |
September 2021
Project Kawasaki Z900 Stocker part 2 Ralph has a blast!
Classic Motorcycle Mechanics

Project Kawasaki Z900 Stocker part 2 Ralph has a blast!

For the best finish on his Z900’s motor Ralph wants the best, so he visits Stephen Smethurst Casting Renovation to find out how it’s done properly.

time-read
10 mins  |
September 2021
Project Suzuki TS400 Part 8 Loom with a view!
Classic Motorcycle Mechanics

Project Suzuki TS400 Part 8 Loom with a view!

We’re getting down into the nitty-gritty this time with component testing and loom building. What could go wrong?

time-read
6 mins  |
September 2021
Project Yamaha TX750 Part 12 A question of balance…
Classic Motorcycle Mechanics

Project Yamaha TX750 Part 12 A question of balance…

Only The Beach Boys had good vibrations… so what’s Mark been up to, to sort out the bad ones coming from his TX750?

time-read
6 mins  |
September 2021
Splitting links
Classic Motorcycle Mechanics

Splitting links

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox.co.uk so he knows what works.

time-read
4 mins  |
September 2021
Classic Motorcycle Mechanics

STAVROS: PRINCE OF PRANKSTERS!

It’s probably fair to say that Stephen JamesParrish’s persona and overall levity throughout his life have muddied the waters as to just how good a bike racer he was back in the day.

time-read
1 min  |
September 2021
Metal magic!
Classic Motorcycle Mechanics

Metal magic!

Ralph Ferrand works with tools all day long – he sells them too at bikerstoolbox co uk so he knows what works.. .

time-read
3 mins  |
July 2021