The engine and gearbox for this one, a 1966 FL Shovelhead with a polished 4-speed gearbox with Andrews gears, came towards the end of the previous build (early 2018) so, as I really didn’t know what I was going to do with it, and was in the middle of my ’70s Shovel build anyway, I stashed it while I waited for inspiration to come.
A ’50s wishbone frame from a Panhead came up shortly after on Instagram over in Belgium for reasonable money so I snapped it up, and made plans with the seller to pick it up a couple of months later at the annual Flanders swap-meet. It, like the engine n’ ’box, was stored in the shed at the end of the garden until such time as I knew what I wanted to build.
Six months or so later, once the weather began to turn colder, I dragged all the parts out, along with a front end and wheels I’d squirreled away over the months, and began to put together the beginnings of a rolling chassis. The forks/yokes/brake ensemble is from a ’70s Shovel, with a genuine, and oft-maligned, ‘banana’ caliper, and the wheels are both 16-inchers (the rear a star hub one). The ’66 74-inch motor (1200cc) has S&S heads, a BCM air-filter, a maintenance-free BDL belt-drive primary conversion, distributor/point s/condenser ignition for simplicity and, quite unusually for a Shovel I know, a 2-1 exhaust (they usually have two separate ’pipes) with upswept cocktail shakers. It’s simple and, so far, reliable.
This story is from the June 2020 edition of Back Street Heroes.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber ? Sign In
This story is from the June 2020 edition of Back Street Heroes.
Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 8,500+ magazines and newspapers.
Already a subscriber? Sign In
THE SLED
I’M A SEMI-PRO SHED BUILDER, WHO BUILDS UNDER THE NAME DIRTY DICK’S… I SAY ‘SEMIPRO’ BECAUSE I’VE ONLY, AT THE TIME OF WRITING, SOLD TWO BIKES (AND, USUALLY, I GET PAID IN BEER FOR ANY OTHER WORK I DO).
THE CHIEF
I BOUGHT MY ENFIELD, A 2001 350 BULLET, IN SHROPSHIRE IN JUNE 2019, WITH JUST 11,000 MILES ON THE CLOCK. IT WAS IN TRIALS TRIM, BUT I ALREADY HAD IN MY HEAD WHAT I WANTED TO DO WITH IT – MAKE IT INTO A ‘50S-STYLE CUSTOM, BASED LOOSELY AROUND AN INDIAN SCOUT THAT I’D SEEN PICTURES OF.
MADE O'GUBBINS
OVER THE LAST YEAR OR SO, MANY OF US’VE HAD TO FOREGO THE JOY OF SEARCHING FOR PARTS AT AUTO-JUMBLES, SHOWS AND BREAKER’S YARDS, RELYING ON EITHER THE HIT-AND-MISS OF INTERNET AUCTION SITES, OR TURNING TO OUR OWN STOCK OF PARTS, WHEN LOOKING AT BUILDING OR MODIFYING A BIKE.
BUDGET BOBBER
PEOPLE ALWAYS SAY CUSTOM BIKES’RE EXPENSIVE, THAT ONLY THE RICH CAN HAVE ‘EM, BUT IF YOU REALLY WANT ONE THERE’S ALWAYS A WAY…
LEAF IT OUT
THE SUZUKI LS650 IS PERHAPS BEST KNOWN FOR HAVING ONE OF THE LEAST SUITED AND MOST RANDOM MODEL NAMES IN MOTORCYCLING HISTORY – THE SAVAGE.
SIZE O
I DECIDED I NEEDED A BIKE FOR MYSELF AS A KEEPER (RATHER THAN THE USUAL BUILD IT, SELL IT, FUND THE NEXT ONE), BUT TIME AND FUNDS WERE GOING TO GET TIGHT. I WANTED A ‘60S/’70S-STYLE HARDTAIL WITH A DECENT-SIZED MOTOR, SINGLE OR TWIN, AND SOMETHING I DIDN’T HAVE TO DO ANY FRAME MODIFICATIONS TO.
LITTLE VICTORIES
SOME FOLK SAY WORK’S A NECESSARY EVIL, OTHERS MAKE THE MOST OF THEIR SITUATION. A GOOD FRIEND ONCE SAID TO ME THAT IT’S THE LITTLE VICTORIES THAT COUNT WHEN AT WORK, USING THEIR MACHINERY TO MAKE BIKE PARTS, BLAGGING FREE STATIONARY, OR JUST HAVING A POO ON THEIR TIME…
BACK TO THE EIGHTIES!
AFTER THE STYLISTIC EXCESSES OF THE 1970S, THE 1980S SAW A KIND OF DIRECTION CHANGE IN CUSTOM BIKE BUILDING – ONE WHICH RESULTED IN NO SMALL PART FROM THE ABUNDANCE OF FAST, RELIABLE FOUR-CYLINDER MOTORCYCLES FROM THE LAND OF THE RISING SUN.
APPLE
MY GOAL WAS TO CREATE A CAFÉ RACER WITH STYLING FROM THE FIFTIES – ROUND CURVES THAT’D MAKE IT POP.
3 DIRT DIGGERS
OVER THE LAST FEW YEARS DIRT DIGGERS, HELD AT THE EDDIE WRIGHT SPEEDWAY STADIUM IN SCUNTHORPE, HAS BECOME THE NUMBER ONE, ALL-COMERS-WELCOME BIKE RACE IN THE UK.
