"Chris Gunn fits the belly tank to his 6 inch Garrett 4CD tractor and then starts work on the plumbing.
John Olsen builds a 1:1 scale 30ft steam launch in his garage workshop.
Terence Holland continues his account of the modifications required to convert his 5 inch gauge Barclay well tank to a specific prototype – Airservice Constructional Corps No. 1.
Mitch Barnes reviews Christine Sanderson’s book on Bassett Lowke.
Jeremy Buck continues his guided tour of the Magdalen Road railway’s locomotive depot with an account of the restoration work carried out on the chassis of his 5 inch gauge A4, Golden Plover.
Doug Hewson makes a set of drain cocks for his rework of LBSC’s well-known 5 inch gauge GWR pannier tank.
Mark Smithers takes a look at the rolling stock on display at the Moseley Railway Trust’s golden jubilee.
Ian Couchman makes the valve chest for his redesigned feed pump for a 4 inch Ruston Proctor traction engine.
David and John Hatherill make an attempt on the record for building a locomotive with their Mamod-powered Meccano model.
Rodney Oldfield machines"

Golden Arrow tackles Caffiers Bank near Calais

Home Foundry Finding the best way to line your furnace

LNER B1 Getting your whistle pitch perfect

Winding Engine Tandem engine gets a pair of compound cylinders

BUTTERSIDE DOWN
Steve Goodbody returns with further tales of the trials and tribulations of a model engineer’s life.

A TWIN TANDEM COMPOUND STEAM ENGINE
Graeme Quayle presents an interesting design for a compound winding engine.

GRINDING THE TARCUTTA CAMSHAFT
Gerard Dean needs a pair of camshafts for a V12 motorcycle engine so decides to grind them himself...

In this issue
An Afternoon of speed and fun
Rust formation and prevention in the workshop

AN ENGINEER’S DAY OUT
Roger Backhouse takes a ride on the NER autocar at the Embsay and Bolton Abbey Steam Railway.

1934 McDONALD TRACTOR
George Punter tackles another tractor construction project.

LNER B1 LOCOMOTIVE
Doug Hewson presents a true to scale five-inch gauge model of Thompson’s B1...

1934 McDONALD TRACTOR
George Punter tackles another tractor construction project.

BUTTERSIDE DOWN
Steve Goodbody returns with further tales of the trials and tribulations of a model engineer’s life.

THE STATIONARY STEAM ENGINE
Ron Fitzgerald tells the story of the development of the stationary steam engine..

INVESTIGATING PARTING TOOL CHATTER
Neal Raine investigates and causes and cure of a common machine tool problem.

A TOUGH LITTLE RING ROLLER
Luker describes a simple tool for rolling strip and angle.

BUTTERSIDE DOWN
Steve Goodbody returns with further tales of the trials and tribulations of a model engineer’s life.

TRANSPORT OF A FOUR INCH GARRETT TRACTION ENGINE
Walter Schleidt watches the extraction of a large engine from a basement workshop.

SMEE 125th ANNIVERSARY STEAM CRUISE
Martin Kyte takes to the water with SMEE in a boat also celebrating its 125th birthday..

AN ENGINEER’S DAY OUT
Roger Backhouse visits Wonderlab, the new visitor feature at the National Railway Museum.

BUTTERSIDE DOWN
Steve Goodbody returns with further tales of the trials and tribulations of a model engineer’s life.

CLASS 128 PARCELS VAN
Ivan Smith completes the construction of an unusual prototype started in 1998...

A NEW WORKSHOP
Peter Seymour-Howell takes a break from building Flying Scotsman to build a new workshop.

HERCULES – A TWIN CYLINDER COMPOUND ENGINE
Chris Walter describes a condensing marine engine first featured in Model Engineer 100 years ago.

A FIVE-INCH GAUGE 0-4-0 PADARN RAILWAY TENDER LOCOMOTIVE
Luker builds a tender for Fire Queen, a Welsh slate quarry locomotive...

RICHMOND LIGHT RAILWAY
Mark Smithers continues his survey of the locomotives on a narrow gauge railway in rural Kent.

RADIAL VALVE GEARS AGAIN
Duncan Webster explores the subtleties of valve gear operation..

CUTTING FLUIDS
R. Finch explains the composition and uses of the various different kinds of cutting fluids.

THE RICHMOND LIGHT RAILWAY
Mark Smithers explores a 2 foot gauge railway recently established in Kent.

BUCKEYE COUPLING FOR 5 INCH GAUGE
Jonathan Buck creates a set of fully working buckeye couplings for an A4 locomotive..

MIDLANDS MODEL ENGINEERING EXHIBITION
John Arrowsmith provides a view of the highlights of this year’s show at The Fosse.

LNER B1 LOCOMOTIVE
Doug Hewson presents a true to scale fiveinch gauge model of Thompson’s B1.

50th AGM OF THE 7¼ INCH GAUGE SOCIETY
John Arrowsmith reports from the Bedford Model Engineering Society..

ROB ROY RALLY 2023
Rex Hanman finds a healthy turn-out of Rob Roys at the Bromsgrove SME.

A MODEL ENGINEER’S CLOCK
Jim Clark uses modern methods to make a skeleton clock inspired by John Wilding.

RADIAL VALVE GEARS AGAIN
Duncan Webster explores the subtleties of valve gear operation...

LNER B1 LOCOMOTIVE
Doug Hewson presents a true to scale five inch gauge model of Thompson’s B1.

THE STATIONARY STEAM ENGINE
Ron Fitzgerald tells the story of the development of the stationary steam engine..

THE FIRST YEAR OF MODEL ENGINEER
Roger Backhouse looks at how and why our magazine was founded.

A MODEL ENGINEER’S CLOCK
Jim Clark uses modern methods to make a skeleton clock inspired by John Wilding.

JOINT FAILURE IN SILVER SOLDERED STAINLESS STEEL
Graham Astbury finds out why silver soldered joints in stainless steel are prone to falling apart.

RADIAL VALVE GEARS AGAIN
Duncan Webster explores the subtleties of valve gear operation.

THE LATHE ELECTRONIC LEADSCREW
Peter Russell makes screw cutting easy with a computer driven leadscrew.

RECYCLING A 3½ INCH GAUGE SOUTHERN SCHOOLS LOCOMOTIVE
Robert Hobbs turns a box of bits into the Southern’s ‘V’ Class locomotive Winchester..

RADIAL VALVE GEARS AGAIN
Duncan Webster explores the subtleties of valve gear operation.

THE EATING OF ELEPHANTS
Steve Goodbody argues that anything is possible if you take it a bite at a time.

THE STATIONARY STEAM ENGINE
Ron Fitzgerald tells the story of the development of the stationary steam engine...

A SIMPLE DEVICE FOR PRODUCING A PLANK EFFECT - Dave Woolven makes a jig for scoring planks accurately.

A FIVE-INCH GAUGE 0-4-0 PADARN RAILWAY TENDER LOCOMOTIVE - Luker presents Fire Queen, a Welsh slate quarry locomotive.

A DIRTY TRAM – A BIT OF NOSTALGIA - Ashley Best creates a Bolton tram model as it really was – dirty and unkempt.

AN ENGINEER’S DAY OUT
Roger Backhouse pays a visit to the Kelham Island Industrial Museum in Sheffield.

THE EATING OF ELEPHANTS
Steve Goodbody argues that anything is possible if you take it a bite at a time.

A NEW WORKSHOP
Peter Seymour-Howell takes a break from building Flying Scotsman to build a new workshop..

PARKLANDS RAILWAY WEEK
Brian Baker spends a week in Hemsby, on the Norfolk coast, at a popular 7¼ inch gauge event.

BEER HEIGHTS LIGHT RAILWAY SIGNALLING
Mike Hanscomb describes the signalling system at the Beer Heights Light Railway at Pecorama in Devon.

THE EATING OF ELEPHANTS
Steve Goodbody argues that anything is possible if you take it a bite at a time...

A NEW TRACK EXTENSION FOR THE MELTON MOWBRAY MES
John Arrowsmith shares in the celebrations at Whissendine.

SLOTTING ON THE LATHE
Jacques Maurel selects the right tools for various slotting jobs on a small lathe.

ELECTRICITY GENERATORS FOR MODEL STEAM ENGINES
Bob Hayter teams up the new technology of dynamos and generators with the old technology of steam engines..

Engineer’s Day Out
A ride on the Exbury Gardens railway.

THE MONTPARNASSE ACCIDENT
Ron Fitzgerald tells the story of the famous accident and looks into the history of the class of locomotive involved.

BASIC OSCILLATOR STEAM ENGINE IN CAD
Luis Trincão leads us through the creation of a 3D CAD model of an oscillating steam engine.

RAILWAY BRAKING FOR MODEL ENGINEERS
Bob Bramson explains the science and the practicalities of stopping trains.

THE STATIONARY STEAM ENGINE
Ron Fitzgerald tells the story of the development of the stationary steam engine...

THE EATING OF ELEPHANTS
Steve Goodbody argues that anything is possible if you take it a bite at a time.

RADIAL VALVE GEARS AGAIN
Duncan Webster explores the subtleties of valve gear operation.

KMYCA – A NEW RAISED MINIATURE RAILWAY
Luc Hoorelbeke tells the story of the relocation of the Koninklijke Model Yacht Club’s track in Antwerp..

RAILWAY BRAKING FOR MODEL ENGINEERS
Bob Bramson explains the science and the practicalities of stopping trains.

BASIC OSCILLATOR STEAM ENGINE IN CAD
Luis Trincão leads us through the creation of a 3D CAD model of an oscillating steam engine.

THE EATING OF ELEPHANTS
Steve Goodbody argues that anything is possible if you take it a bite at a time.

GRASSHOPPER BEAM ENGINE
Martin Gearing describes a half beam engine suitable for a beginner.

FITTING DIGITAL READ OUTS TO A WARCO
Graham Astbury explains how he fitted the scales to a Warco WM16 milling machine.

THE STATIONARY STEAM ENGINE
Ron Fitzgerald tells the story of the development of the stationary steam engine.

FLYING SCOTSMAN IN 5 INCH GAUGE
Peter Seymour-Howell builds a highly detailed Scotsman based on Don Young’s drawings..

AN ENGINEER’S DAY OUT
Roger Backhouse admires the Matterhorn from the comfort of the world’s first electric mountain railway.

A4 PACIFIC CONSTRUCTION
John Arrowsmith visits a workshop where an impressive 7¼ inch gauge A4 is taking shape.

SLOTTING ON THE LATHE
Jacques Maurel investigates the forces involved in creating slots on a small lathe..

THE EATING OF ELEPHANTS
Steve Goodbody argues that anything is possible if you take it a bite at a time.

A LINCOLNSHIRE GEM
Mark Smithers braves the bracing air of Skegness to explore the history of the Lincolnshire Coast Light Railway...

FLYING SCOTSMAN IN 5 INCH GAUGE
Peter Seymour-Howell builds a highly detailed Scotsman based on Don Young’s drawings.

A MINIATURE OSCILLATING STEAM ENGINE
Hotspur presents a three-cylinder, reversible, oscillating steam engine.

4741

4740

4739

4738

4737

4736

4735

4734

4733

4732

4731

4730

4729

4728

4727

4726

Model Engineer is a great way to stay informed of everything to do with working mechanical models. With over 100 years of experience to draw on, Model Engineer covers everything from classic steam locomotives to cutting-edge modern developments in scale engineering. Regular content includes constructional articles, features on the best techniques and tools available and profiles of full-size modelling subject prototypes. Model Engineer magazine publishes 26 great issues a year.

25 Years of Model Engineers Workshop Special

1. You agree that the use of Magzter.com, the application and its services, are at solely at your own risk. Neither Magzter.com nor its associates nor employees nor third party content providers guarantee that the service will be completely uninterrupted or error-free or foolproof against miscreant activities. Nor do they warranty that you will get the exact results as expected or promised by the website or product.

11. THE SERVICE AND ALL PUBLICATIONS ARE PROVIDED ON AN 'AS IS' AND 'AS AVAILABLE' BASIS. MAGZTER, ITS AFFILIATES, SUPPLIERS, LICENSORS AND AGENTS EXPRESSLY DISCLAIM ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. WITHOUT LIMITING THE FOREGOING, NEITHER MAGZTER NOR ITS AFFILIATES, SUPPLIERS, LICENSORS OR AGENTS, MAKES ANY WARRANTY THAT (I) THE SERVICE WILL MEET YOUR REQUIREMENTS, (II) THE SERVICE WILL BE UNINTERRUPTED, TIMELY, SECURE, OR ERROR-FREE, (III) THE INFORMATION THAT MAY BE OBTAINED FROM THE USE OF THE SERVICE OR THAT MAY BE CONTAINED IN THE PUBLICATIONS WILL BE ACCURATE OR RELIABLE, OR (IV) THE QUALITY OF ANY PUBLICATIONS OR THE SERVICE WILL MEET YOUR EXPECTATIONS. YOU ARE SOLELY RESPONSIBLE FOR OBTAINING AND MAINTAINING RELIABLE INTERNET CONNECTIVITY AND YOUR DEVICE. MAGZTER IS NOT RESPONSIBLE FOR YOUR INABILITY TO DOWNLOAD CONTENT. ANY MATERIAL DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE USE OF THE SERVICE IS DONE AT YOUR OWN DISCRETION AND RISK AND YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF ANY SUCH MATERIAL. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM MAGZTER OR THROUGH OR FROM THE SERVICE SHALL CREATE ANY WARRANTY.

2. You will maintain and promptly update that information to keep it true, accurate, current and complete. You are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer, and you agree to accept responsibility for all activities that occur under your account, including the selection and use of all content and services.

2.You will maintain and promptly update that information to keep it true, accurate, current and complete. You are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer, and you agree to accept responsibility for all activities that occur under your account, including the selection and use of all content and services.

3. In no event will Magzter.com or any person or entity or third party involved in the creation, production and distribution of the content on the website and the application be liable in contract or legally for any damages, including and not limited to, direct, indirect, incidental, special, and consequential incurred to you while or on using Magzter.com. By registering on the website or downloading the application, you agree that the provisions mentioned in this section shall apply to all use of and content on the website and the application.

3. Without prior written or authorised permission from Magzter, you should not modify, copy, distribute or sell any content obtained from Magzter as everything published here is the proprietary property of Magzter or its licensors. As such unauthorised use may also violate applicable laws including copyright and trademark laws, Magzter strictly prohibits these and will terminate your access and account if any such illegal activity is proved or detected. You should also stand liable for the damages caused by these unauthorised activities. Except as permitted by the Publication's lawful owner, you acknowledge that you do not acquire any ownership rights by downloading Publications accessed through the Service. Except as explicitly required under copyright law or permitted by the features of the Service you may not modify, reverse engineer, publish, transmit, display, participate in the transfer or sale, create derivative works of, or in any way commercially exploit or provide to a third party the content of the App, the Publications, or any portion of them without the express permission of Magzter and the owner of such content. We do not grant you any licenses, express or implied, to the intellectual property of Magzter or Magzter's licensors.

5. You specifically acknowledge that Magzter.com is not liable for any kind of defamatory or offensive or illegal conduct of other users or third parties or their content and that the risk of injury from the foregoing rests entirely with you.

8. Magzter reserves all rights to monitor the content published and inputted by you for the purpose of determining whether you are compliant with these terms and conditions and other operating rules determined by Magzter. Magzter has the right to take decisions about the content and delete them at its own will.

9. Magzter is a distributor and NOT a publisher of the Publications and so Magzter has no editorial control over the content, including opinions, advice, statements, services, offers etc., that is represented in the magazines. So Magzter will not take responsibility for the accuracy or the reliability for any information or facts provided therein or that is made available through the service, by anyone other than authorised Magzter employees who are acting on their official capacities. Accordingly, we have no editorial control over the Publications. Any opinions, advice, statements, services, offers or other information or content expressed or made available by third parties, including those made in Publications offered by the Service, are those of the respective author(s) or publisher(s) and not of Magzter. Magzter will not be liable for any loss or damage caused by your reliance on information obtained through the Service or from the Publications. The Service may contain links to other Internet sites and third-party resources and Magzter does not assume any responsibility or liability for communications or materials available at such linked sites. These links are provided for your convenience only. You are solely responsible for understanding any terms and conditions that may apply when you visit or place an order through a third-party site.

Details of the objectionable content, including its link on our platform

Download your favorite titles and read them offline, anytime and anywhere

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines and newspapers from thousands of best-selling titles.

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines from thousands of best-selling titles.

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines from {{magCount}} best-selling international titles.

Girish Ramdas is the Co-founder and CEO of Magzter, a New York based startup that has been making waves in the global digital publishing business. Magzter has crossed 80 million users since its inception in 2011 from more than 150+ countries with 1000s of magazines, newspapers and books from more than 4,500 publishers worldwide. He has more than 25 years of experience in cross-platform publishing, including print, mobile, and Web development. During this period, he has co-founded and run three successful start-up businesses. He has enabled magazine companies to go digital and helps them monetize their content across the digital world. Girish's deep industry experience in online, mobile and publishing ecosystems has made him an expert in acquisition, marketing and monetizing digital content across platforms globally.

In the event that you encounter any objectionable content on our platform, we have put in place a grievance redressal policy to address your concerns.

Magzter Inc. (“Company”, “we”, “us” or “our”) knows that you care about how your personal information is used and shared. Please read the following privacy policy (the “Policy”) to learn more about our privacy practices. By visiting any of the websites operated by the Company, and any sub-domains thereof, or using any of our mobile applications and other methods of content distribution (collectively, the “Service”), you acknowledge that you accept the practices and policies outlined in this Policy, and you hereby consent that we will collect, use, and share your information in the following ways.

Magzter Inc. is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 80 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

Magzter is committed to providing a safe and secure platform for our users. Please note that Magzter is merely a platform for publishers to distribute their content. We do not control or endorse the content published on our platform. We cannot be held responsible for the actions of our publishers or their content.

Magzter is not responsible for compensating any party that has suffered damages or incurred costs due to any content, or part of the content, that violates their rights. Magzter is not liable to face any legal action in civil court for any violation of rights caused by any content, or part of the content, that infringes the rights of a third party.

Magzter offers the world’s largest {{allyoucanread}} subscription service called {{gold}} which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

Magzter offers the world’s largest “All-You-Can-Read” subscription service called Magzter GOLD which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

Name

Note: This will only share the cover and the publication information, but not the content.

Please fill out this form if you need any help regarding publishing your content on Magzter

Prior to Magzter, he was the President of Dot Com Infoway (DCI) and Galatta Media. His duties included strategic marketing, partnership development, and monetizing content globally. DCI grew from a small team of 3 in 2000 to 300 by 2011 and was dealing with web, software and app development for clients globally.

Since we launched, Magzter has been committed to partnering with global organizations to provide the greatest possible newsstand technology & service to our customers. Whether you are looking to offer magazine subscriptions to your customer database or just want to learn more, Magzter is committed to helping your business grow. To find out more, please fill out the questionnaire below:

The DMCA allows us to restore the removed content if the party filing the original DMCA Notice does not file a court action against you within ten business days of receiving the copy of your Counter Notice.

This Policy covers Company’s treatment of personally identifiable information (“Personal Information”) and other information about you and your computer or device that Company gathers when you are accessing the Service. We may collect Personal Information from you, as explained in more detail below, and we use this Personal Information internally in connection with our Services, including to personalize, provide, and improve our products, services, content, and advertising, and to allow you to set up a user account and profile, to contact you, to fulfill your requests for certain products and services, and to analyze how you use the Services. In certain cases, we may also share some Personal Information with third parties, but only as described in point 4.

This title is included with your Magzter GOLD subscription

To analyze the quality of content and provide appropriate feedback to publishers

We have designated a Grievance Officer to address any complaints related to objectionable content.

We request that any complaint related to objectionable content be sent to the Grievance Officer through email to the above-mentioned email address. We also request that you provide the following details when making a complaint:

and the App that provides you the capability to order, subscribe to and receive the delivery of various magazines, books, news and magazine and publication related content (collectively known as 'Publications') and to have these digital versions of the Publications delivered to you

c. We also collect information associated with your use of the application in order to make personalized recommendations. If you provide your third-party account credentials to us, you understand some content and/or information in those accounts (“Third Party Account Information”) may be transmitted into your account with us if you authorize such transmissions, and that Third Party Account Information transmitted to the Service is covered by this Policy.

f. The Personal Information we collect allows us to respond to your requests, improve our products and services, customize the advertising and content you see, and communicate with you about new products.

is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 87 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

n. We will also use usage information in order to ensure users adhere to our Terms of Use. For example, a user’s usage information will help us confirm that a user only downloads a magazine or other content a permitted number of times or to a permitted number of devices.

which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

{{magzter}} is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 87 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

Model Engineer Magazine - 4632

Model Engineer Magazine - 4632

In this issue

Model Engineer Magazine Description: