A Stepper Motor Driven Toolchanger
A special accessory for CNC lathes by Simon Davies.

Indexing Modification for a Tailstock Turret
Mick Knights makes a modification to Alex du Pre’s design.

Exploring the Latest 3D Printing Technology
Mark Noel attended the GoPrint3D – Mintronics for MEW.

Milling for Beginners
This month Jason Ballamy looks at measuring and marking out.

Drip Feed for a Lathe
Jos Corbeau and Henk Salij report an unusual approach.

The 2018 Stevenson Trophy
The results of the first year of this competition for practical workshop equipment.

A High-Speed Engraving Attachment
Keith Johnson continues the description of this useful accessory for CNC.

Tools from Trash: The Whisk-a-Shine and the WhiskerShine
Resident womble and CamelCase fan Mark Noel is back from the tip.

A Temperature Controller for the Home Workshop
Chris Gabel describes how to use a PID controller suitable for his recently featured 
Bench Oven.

Photographic Lighting for the Workshop
Advice on workshop photography and a handy Ring Light design from David Haythornthwaite.

A Low-Profile Centring Tool
A neat solution to aligning a rotary table when headroom is at a premium, with John Hinckley.

A ‘Switch Off’ Arrangement for Parting Off
More detail of Jacques Maurel’s intriguing device.

Beginner’s Guide to Servicing Your Lathe Chuck
A great guide to restoring the performance of your self centring chucks by Pete Barker.


A CUTTING OIL DELIVERY SYSTEM

Roger Froud combines 3D printing and traditional metalworking

GETTING THE MOST FROM A BRUSHLESS MILL

Jason Ballamyfifits a powered table feed to an SX2Mill.

A SHEET METAL PROJECT

Dave Fenner models an AEC Matador.

A Visit to the SMEE at Marshall House.
The Editor looks at the range of machinery to be found in the workshops of the Society of Model and Experimental Engineers.

Micro-Milling
Mike Tilby investigates an interesting geometry for micro-milling using a method originally adopted by Professor Dennis H. Chaddock, designer of the Quorn grinder.

Micro-Milling
Mike Tilby looks at the challenges of milling with very small cutters, and discusses some of the design choices behind his shop-built machine for this challenging work.

Tales from the Workshop
Geoff Theasby tells the story of Fred Umpelby, the man who pre-empted the Wankel engine.

A Basic Leadscrew Clutch for Mini Lathes
Howard Lewis offers a particularly compact solution to disengaging a mini lathe’s leadscrew drive..

A Boring and Facing Head
Detailed plans for Graham Meek’s New Design.

OPTIMUM TU2004V LATHE
Ideas and improvements for a German-branded lathe...

Making a Sensitive Drilling Attachment
Pete Barker recreates a hundred-yearold design from Model Engineer and finds that it is as effective as designer, Hubert Dyer, claimed. 

Mini Lathe Gear Cover
Stub Mandrel presents a simple modification that does away with a regular annoyance for mini lathe owners.

Making an Internal Gear
Internal gears cannot be made using the usual processes for normal gears. Chris Hobday explains how to tackle the task by broaching a gear in a Vertical Mill.

GHT’s Universal Pillar Tool
Warren Williams marks fifty years of George H Thomas’ popular design for a Universal Pillar Tool.

A Metalwork File Storage System, Part 2
Alan Bryan breaks down the process of design and planning behind his file storage system..

Reconditioning DTI Gauges
Mike Joseph shares his experiences with bringing sticky dial test indicators into good working order.

The Third Dimension
Neil Wyatt introduces an occasional series looking at different approaches to engineering challenges, starting with a project involving many different technologies.

Artful Dodges.
In his final dodge, John Smith looks at ways to turn a large convex radius..

A Compact Dividing Head
Make this robust and accurate dividing head for your milling machine.

Improving a Tangential Flycutter.
An update from Howard Lewis with further improvements to his tool described in issue 316.

The Midlands Model Engineering Exhibition.
The latest news a guide to the trade stands at MMEX in October 2023.

Angle setting for Bench Grinders.
Austin Hughes simplifies the process of setting the angles for sharpening lathe tools with just a basic adjustable rest for your bench grinder.

Boring from the Lathe Tailstock.
Keith keen shares his design for a special clamp to allow a boring head to be used in the lathe tailstock.

Accurate Tapping
Make sure you get the most accurate screwed holes.

A SmallMachine Saw.
Over forty years ago Alan Jackson tried to make a rotary metal saw; it wasn’t a success but it evolved into a power hacksaw that has give over three decades of good service.

Universal Belt Grinder.
Paul Lousick describes his design for a compact belt linisher which can be used with either an abrasive belt or grinding wheels.

An Eagle Surface Grinder.
Robert Trethewey concludes his comprehensive strip down of the Dronfield Eagle surface grinder.

Beginner’s Workshop.
This month Geometer looks at gland and pipe fittings, particularly useful for full size restorations and repairs, as well as for steam modellers...

An Eagle Surface Grinder
Robert Trethewey commences the restoration of a Dronfield Eagle machine with a full strip down, with details that will benefit any other owners of these sizeable machines.

The Midlands Model Engineering Exhibition is Coming!
Model Engineers’ Workshop and Model Engineer will be joining the Society of Model and Experimental Engineers to celebrate our 125th Birthday with special activities at this year’s MMEX. You are invited to join us!

The Morphing of a Tool
Matt Shaw tells the story of a multipurpose spindle mounted too for his Boxford lathe that is easily adapted to other machines.

The King is Dead! – Long Live the King!
Matt Shaw replaced his century old pillar drill with a new Clarke machine, switching over various modifications and beefing it up for jobs beyond its original capacity.

From the Archives
This month we only nip back a couple of decades in our series celebrating 125 years of Model Engineer..

Myford Spindle Bearing Replacement
In this guide for Myford 254 owners, Robert Trethewey takes you step by step through the process of a headstock bearing change.

Upgrading a Mill with a High Speed Spindle
Simon Davies found his shop made spindle couldn’t take the extreme speeds he wanted to use; he explains how to go about fitting an off-the shelf device..

A Foray into Casting
Laurie Leonard continues his tales of casting different materials in the home workshop.

Cutting grooves for circlips
It’s a little while since we heard from Mike Cox, in this issue he details an easily made device for cutting narrow groove.

Make a collet Block Stop
Repeatable accuracy for machining small workpieces.

SHARPEN YOUR TAPS
Don’t discard blunt or broken taps when you can restore them with this great accessory..

Beginner’s Workshop
This month Geometer introduces a range of different valve types. 16 An Effective Edge Finder Fergus Malcolm looks at different types of edge finder and explains his own design and howto use it.

Safely turning long objects in a lathe
Brett Meacle describes a spindle steady to help avoid accidents when turning long workpieces in your lathe.

From the Model Engineer Archive
To mark 125 years of ME will be looking at their archive in 2023. This month we take a trip back to 2001..

A Compound Slide for a Sherline Lathe
This intermediate project is a great way to extend the capabilities of a small lathe. Geoff Walker provides plans and instructions.

Workshop Photography
In the first part of a short series, here are some useful tips for improving the quality of your workshop photos..

THE ARTFUL DODGER
A new series for beginners in the hobby showcases John Smith’s remarkable engineering skills.

STEVENSON TROPHY ENTRIES
A great selection of workshop tooling, get ready to cast your vote!

Drill grinding on a Worden
Howard Lewis describes the accessories he uses to sharpen four-point drills on his Worden grinder.

A portable welding bench
SMAC experimented with a range of solutions a before coming up with a satisfactory design.

Modifying my mini lathe
Geoff Andrews returns with a number of valuable ideas for improving the cross-slide of these popular machines..

Beginners’ Workshop
Geometer explains how to use a scraper, future instalments will build on this by looking at the art of hand fitting.

Building A Free Pendulum Clock
Tony Jeffree completes the work on his electronically controlled free pendulum clock and contemplates what future projects it may lead to.

The Origins of Modern Engineering
Stub Mandrel visits the Science Museum to see machinery from early days of precision engineering..

Stan Bray 1925 - 2022
We pay tribute to Model Engineers’ Workshops originator and first editor.

Building a Free Pendulum Clock
Tony Jeffree has further information on his electronically controlled free pendulum clock.

Building A Free Pendulum Clock
Tony Jeffree gives more detail of his experiments with an electronically controlled free pendulum clock.

A New Makerspace
The Editor visits a new facility in Penarth that is engaging more people in science, technology and engineering.

Bob’s Better Bevels
Bob Reeve explains his approach to machining better bevel gears.

Worden Point Grinding Jig
Laurie Leonard explains how to make this useful accessory for grinding sharp points.

The latest issue of Model Engineers' Workshop is now available!

On the Cover
A Golf Trolley Milling Machine Auto Feed Unit Robert Trethewey found a golf cart motor with integral gearbox offered and ideal solution for his mill.
Beginners’ Workshop Geometer looks at simple drilling jigs.
A Small Pantograph Engraver Martin Berry adapted a pantograph for engraving dials and nameplates.
A Mill Alignment Laser Eckhart Hartmann explains how to make an alignment laser that avoids the need for extreme precision in setting it up.
Kite Aerial Photography Mark Noel concludes this fascinating two parter on the challenges of making a stable aerial platform.
Restoring a Centec 2A Mill Stan Nesbitt took a slightly shabby old mill and made a fine job of sprucing it up.
Lathe Topslide Digital Calliper Jock Miller shares his approach and asks when is a vernier not a vernier? 
A Load Abalone Say it slowly… Bob Dodds restored a Victorian chair and had to work with an unfamiliar material – mother of pearl.
Making a Comparator Howard Lewis makes a precision stand for a dial indicator to allow accurate comparative measurements.
Computers in the Workshop Stub Mandrel gives a beginner’s introduction to CAD and CNC in the home workshop.
Workshop Cranes Peter King in New Zealand shares his experience of constructing a number of workshop cranes.
Plus all your usual favourites!


In this issue of Model Engineers' Workshop:

On the Cover: The cover of this issue shows Jurby Church on the Isle of Man, an example of many remarkable aerial photographs taken by Mark Noel using a kite. See the fascinating article where he rises to the challenge of making a photography platform that can produce steady images while dangling from a line hundreds of feet in the air.

A Myford Lathe Bearing Modification The Myford 7-series cross-slide bearing design is open to improvement; Laurie Leonard describes how he upgraded with the Arc Euro Trade bearing set.

Boring and Facing Heads Graham Meek concludes his brief series on making your own automatic boring and facing head. 

A Shop Made Quick Change Tool Post Ted Hansen’s design offers a straightforward route to upgrading your lathe’s performance.

Beginners’ Workshop Geometer explores getting different surface finishes.

Universal Tool Post Fixture Stewart Hart completes his flexible toolpost spindle.

A Quick Stop for Moveable Quill Machines John Purdy explains this neat precision screw depth stop with a quick-release feature.

Watchmaker’s Lathe Collets Adrian Rawson filled the gaps in a collection of 8mm collets, this article will help anyone else with gaps in their collet set. 

Tip Holder Jacques Maurel explains his approach to making external turning tools using tungsten carbide inserts.

A Tap Guide Holder A neat little accessory from Keith Keen.

A Chainsaw Chain Vice Will Doggett describes another practical workshop tool, this is a special sub-vice that addresses the issue of securely clamping lengths of chainsaw chain for sharpening.

Plus all your usual favourites!

Welcome to 2022! Issue 312 of Model Engineers’ Workshop once again focuses on a host of practical projects: Make you own Quick Change Toolpost, A Sliding Angle Grinder Stand, A Universal Toolpost Fixture; A Boring and Surfacing Head; An X-Y Worktable and fit a three-axis Digital Read Out to your Mill. Plus loads of other useful content fro beginners and old hands alike. No other magazine brings you as many practical ideas for your metalworking workshop.

On the Cover
The cover of this issue shows Ian Johnson receiving the Stevenson Trophy after an extended wait, due to the Covid pandemic. Behind the trophy itself you can see some of the toolholders from his quick-change system for the KX-1 milling machine. More details of plans to resume the competition in 2022 are inside.

Boring and Facing Heads 
Graham Meek has made some significant refinements to his automatic boring and facing head design. This short series has detailed plans for making your own. 

Shapeoko 3 CNC Router 
John Hinkley won one of these new machines. Originally intended for wood, many people use it to engrave aluminium and even stainless steel. How did he get on?

Beginners’ Workshop 
Geometer explains ways of locking nuts against unintentionally loosening.

Improving a Myford 254v Plus Lathe 
Robert Trethewey already found this lathe excellent, but still found room for a few improvements – and then added a DRO and linear scales.

An X-Y Dual Axis Worktable for The Small Workshop 
Further detailed plans for making Terry Gorin’s useful compact design.

Index to Model Engineers’ Workshop 
Barry Chamberlain has once again compiled a comprehensive index, this one covers issues 297 to 308.

Improvements to a Milling 
Vice Robert Sharp’s new vice was functional and accurate, but he felt it lacked refinement and so he made a few changes to make it more pleasant to use.

Reducing Play in a Drill 
Press Laurie Leonard improves the accuracy of his bench drilling machine.

A Compac Bore Gauge Set 
Howard Lewis fills in the missing pieces to restore a valuable precision instrument to service.

Filing Buttons 
Making some simple aids to accurate hand filing, from Stub Mandrel.

Centre Finding on A Screen 
David Hall updates a classic MEW design for a centre finder by adopting it for use with a computer.


This issue features Terry Gorin’s well-executed design for a compact X-Y table, see page 59. One use among many for this deice would be to convert a drill for accurate co-ordinate drilling. Thanks also to Dave Prout for his ‘Christmas Card’ to all readers.

Recommissioning a Myford ML 4 - Howard Lewis helped a fellow forum member bring a veteran lathe back into good working order.

Machine Rollers or Skates - These robust self-contained rollers can help make moving heavy machinery easier and safer.

Making Carbide Tipped Milling Cutters - Jacques Maurel explains the making of holders for carbide tips using his ‘Universal Vice’ from issue 306.

Making an Instrument Vice - John Fawcett cocludes the construction of this flexible accessory.

The Basics of 230/400V AC Electricity in Simple Terms - Steve Skelton looks at devices and systems to prevent against an electrical shock.

A Cross-Slide Lock for A Myford Seven - This handy improvement from Peter Brewer is a must for every Myford.

Milling in the Lathe - An introduction to using a lathe as a substitute for a milling machine.

Beginners’ Workshop - In this issue Geometer looks at using reamers.

Reducing Play in a Drill Press - Laurie Leonard decided to fit gib strips to his drill


May 2024

April 2024

March 2024

February 2024

January 2024

December 2023

November 2023

October 2023

September 2023

August 2023

July 2023

June 2023

May 2023

April 2023

March 2023

February 2023

Model Engineers' Workshop is the ideal workshop companion for all hobby engineers. Model Engineers' Workshop shines a spotlight on the tools and techniques used by model makers, light engineers, restorers and customisers and those who like making and modding their own tools. You'll find readers' tips, reviews of workshop equipment as well as articles on restoring old tools and making your own as well as the latest new technologies, techniques and materials. Model Engineers' Workshop magazine publishes 13 great issues a year.

25 Years of Model Engineers Workshop

1. You agree that the use of Magzter.com, the application and its services, are at solely at your own risk. Neither Magzter.com nor its associates nor employees nor third party content providers guarantee that the service will be completely uninterrupted or error-free or foolproof against miscreant activities. Nor do they warranty that you will get the exact results as expected or promised by the website or product.

11. THE SERVICE AND ALL PUBLICATIONS ARE PROVIDED ON AN 'AS IS' AND 'AS AVAILABLE' BASIS. MAGZTER, ITS AFFILIATES, SUPPLIERS, LICENSORS AND AGENTS EXPRESSLY DISCLAIM ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. WITHOUT LIMITING THE FOREGOING, NEITHER MAGZTER NOR ITS AFFILIATES, SUPPLIERS, LICENSORS OR AGENTS, MAKES ANY WARRANTY THAT (I) THE SERVICE WILL MEET YOUR REQUIREMENTS, (II) THE SERVICE WILL BE UNINTERRUPTED, TIMELY, SECURE, OR ERROR-FREE, (III) THE INFORMATION THAT MAY BE OBTAINED FROM THE USE OF THE SERVICE OR THAT MAY BE CONTAINED IN THE PUBLICATIONS WILL BE ACCURATE OR RELIABLE, OR (IV) THE QUALITY OF ANY PUBLICATIONS OR THE SERVICE WILL MEET YOUR EXPECTATIONS. YOU ARE SOLELY RESPONSIBLE FOR OBTAINING AND MAINTAINING RELIABLE INTERNET CONNECTIVITY AND YOUR DEVICE. MAGZTER IS NOT RESPONSIBLE FOR YOUR INABILITY TO DOWNLOAD CONTENT. ANY MATERIAL DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE USE OF THE SERVICE IS DONE AT YOUR OWN DISCRETION AND RISK AND YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF ANY SUCH MATERIAL. NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM MAGZTER OR THROUGH OR FROM THE SERVICE SHALL CREATE ANY WARRANTY.

2. You will maintain and promptly update that information to keep it true, accurate, current and complete. You are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer, and you agree to accept responsibility for all activities that occur under your account, including the selection and use of all content and services.

2.You will maintain and promptly update that information to keep it true, accurate, current and complete. You are responsible for maintaining the confidentiality of your account and password and for restricting access to your computer, and you agree to accept responsibility for all activities that occur under your account, including the selection and use of all content and services.

3. In no event will Magzter.com or any person or entity or third party involved in the creation, production and distribution of the content on the website and the application be liable in contract or legally for any damages, including and not limited to, direct, indirect, incidental, special, and consequential incurred to you while or on using Magzter.com. By registering on the website or downloading the application, you agree that the provisions mentioned in this section shall apply to all use of and content on the website and the application.

3. Without prior written or authorised permission from Magzter, you should not modify, copy, distribute or sell any content obtained from Magzter as everything published here is the proprietary property of Magzter or its licensors. As such unauthorised use may also violate applicable laws including copyright and trademark laws, Magzter strictly prohibits these and will terminate your access and account if any such illegal activity is proved or detected. You should also stand liable for the damages caused by these unauthorised activities. Except as permitted by the Publication's lawful owner, you acknowledge that you do not acquire any ownership rights by downloading Publications accessed through the Service. Except as explicitly required under copyright law or permitted by the features of the Service you may not modify, reverse engineer, publish, transmit, display, participate in the transfer or sale, create derivative works of, or in any way commercially exploit or provide to a third party the content of the App, the Publications, or any portion of them without the express permission of Magzter and the owner of such content. We do not grant you any licenses, express or implied, to the intellectual property of Magzter or Magzter's licensors.

5. You specifically acknowledge that Magzter.com is not liable for any kind of defamatory or offensive or illegal conduct of other users or third parties or their content and that the risk of injury from the foregoing rests entirely with you.

8. Magzter reserves all rights to monitor the content published and inputted by you for the purpose of determining whether you are compliant with these terms and conditions and other operating rules determined by Magzter. Magzter has the right to take decisions about the content and delete them at its own will.

9. Magzter is a distributor and NOT a publisher of the Publications and so Magzter has no editorial control over the content, including opinions, advice, statements, services, offers etc., that is represented in the magazines. So Magzter will not take responsibility for the accuracy or the reliability for any information or facts provided therein or that is made available through the service, by anyone other than authorised Magzter employees who are acting on their official capacities. Accordingly, we have no editorial control over the Publications. Any opinions, advice, statements, services, offers or other information or content expressed or made available by third parties, including those made in Publications offered by the Service, are those of the respective author(s) or publisher(s) and not of Magzter. Magzter will not be liable for any loss or damage caused by your reliance on information obtained through the Service or from the Publications. The Service may contain links to other Internet sites and third-party resources and Magzter does not assume any responsibility or liability for communications or materials available at such linked sites. These links are provided for your convenience only. You are solely responsible for understanding any terms and conditions that may apply when you visit or place an order through a third-party site.

Details of the objectionable content, including its link on our platform

Download your favorite titles and read them offline, anytime and anywhere

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines and newspapers from thousands of best-selling titles.

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines from thousands of best-selling titles.

Gift your loved ones with a Magzter Gift Card instantly and give them the freedom to read their favorite magazines from {{magCount}} best-selling international titles.

Girish Ramdas is the Co-founder and CEO of Magzter, a New York based startup that has been making waves in the global digital publishing business. Magzter has crossed 80 million users since its inception in 2011 from more than 150+ countries with 1000s of magazines, newspapers and books from more than 4,500 publishers worldwide. He has more than 25 years of experience in cross-platform publishing, including print, mobile, and Web development. During this period, he has co-founded and run three successful start-up businesses. He has enabled magazine companies to go digital and helps them monetize their content across the digital world. Girish's deep industry experience in online, mobile and publishing ecosystems has made him an expert in acquisition, marketing and monetizing digital content across platforms globally.

In the event that you encounter any objectionable content on our platform, we have put in place a grievance redressal policy to address your concerns.

Magzter Inc. (“Company”, “we”, “us” or “our”) knows that you care about how your personal information is used and shared. Please read the following privacy policy (the “Policy”) to learn more about our privacy practices. By visiting any of the websites operated by the Company, and any sub-domains thereof, or using any of our mobile applications and other methods of content distribution (collectively, the “Service”), you acknowledge that you accept the practices and policies outlined in this Policy, and you hereby consent that we will collect, use, and share your information in the following ways.

Magzter Inc. is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 80 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

Magzter is committed to providing a safe and secure platform for our users. Please note that Magzter is merely a platform for publishers to distribute their content. We do not control or endorse the content published on our platform. We cannot be held responsible for the actions of our publishers or their content.

Magzter is not responsible for compensating any party that has suffered damages or incurred costs due to any content, or part of the content, that violates their rights. Magzter is not liable to face any legal action in civil court for any violation of rights caused by any content, or part of the content, that infringes the rights of a third party.

Magzter offers the world’s largest {{allyoucanread}} subscription service called {{gold}} which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

Magzter offers the world’s largest “All-You-Can-Read” subscription service called Magzter GOLD which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

Name

Note: This will only share the cover and the publication information, but not the content.

Please fill out this form if you need any help regarding publishing your content on Magzter

Prior to Magzter, he was the President of Dot Com Infoway (DCI) and Galatta Media. His duties included strategic marketing, partnership development, and monetizing content globally. DCI grew from a small team of 3 in 2000 to 300 by 2011 and was dealing with web, software and app development for clients globally.

Since we launched, Magzter has been committed to partnering with global organizations to provide the greatest possible newsstand technology & service to our customers. Whether you are looking to offer magazine subscriptions to your customer database or just want to learn more, Magzter is committed to helping your business grow. To find out more, please fill out the questionnaire below:

The DMCA allows us to restore the removed content if the party filing the original DMCA Notice does not file a court action against you within ten business days of receiving the copy of your Counter Notice.

This Policy covers Company’s treatment of personally identifiable information (“Personal Information”) and other information about you and your computer or device that Company gathers when you are accessing the Service. We may collect Personal Information from you, as explained in more detail below, and we use this Personal Information internally in connection with our Services, including to personalize, provide, and improve our products, services, content, and advertising, and to allow you to set up a user account and profile, to contact you, to fulfill your requests for certain products and services, and to analyze how you use the Services. In certain cases, we may also share some Personal Information with third parties, but only as described in point 4.

This title is included with your Magzter GOLD subscription

To analyze the quality of content and provide appropriate feedback to publishers

We have designated a Grievance Officer to address any complaints related to objectionable content.

We request that any complaint related to objectionable content be sent to the Grievance Officer through email to the above-mentioned email address. We also request that you provide the following details when making a complaint:

and the App that provides you the capability to order, subscribe to and receive the delivery of various magazines, books, news and magazine and publication related content (collectively known as 'Publications') and to have these digital versions of the Publications delivered to you

c. We also collect information associated with your use of the application in order to make personalized recommendations. If you provide your third-party account credentials to us, you understand some content and/or information in those accounts (“Third Party Account Information”) may be transmitted into your account with us if you authorize such transmissions, and that Third Party Account Information transmitted to the Service is covered by this Policy.

f. The Personal Information we collect allows us to respond to your requests, improve our products and services, customize the advertising and content you see, and communicate with you about new products.

is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 87 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

n. We will also use usage information in order to ensure users adhere to our Terms of Use. For example, a user’s usage information will help us confirm that a user only downloads a magazine or other content a permitted number of times or to a permitted number of devices.

which gives digital readers unlimited access to 8,500+ magazines and newspapers for a monthly subscription price. Magzter also has the largest number of stories in the world with its game-changing ezRead 2.0 feature for its apps, which enables smartphone and small-screen mobile users to enjoy magazine content the way it was meant to be enjoyed, with article text that is easy to read and is accompanied by stunning videos and high resolution photography.

{{magzter}} is the World's largest and fastest growing self-service, cross-platform digital newsstand with over 87 million users since its inception in 2011 and thousands of magazines and newspapers across 40+ categories and 60+ languages. Headquartered in New York, Magzter has its local presence in Amsterdam, London, Mexico City, Chennai, Mumbai, New Delhi, Bengaluru, Singapore, and will soon be expanding to other countries. Founded by global entrepreneurs, Girish Ramdas and Vijay Radhakrishnan in June 2011, Magzter enables magazine and newspaper publishers around the world to create and deliver digital editions of their titles to global consumers.

Model Engineers' Workshop Magazine - July 2018

Model Engineers' Workshop Magazine - July 2018

In this issue

Model Engineers' Workshop Magazine Description: